
Robe Hook is constructed of zinc
except for accent ring that is brass.
YB4703BN – Robe Hook
Brushed Nickel Finish, Wholesale
Packaging
YB4703CH – Robe Hook
Chrome Finish, Wholesale Packaging
YB4703CP – Robe Hook
Chrome & Polished Brass Finish,
Wholesale Packaging
YB4703PB – Robe Hook
Polished Brass Finish, Wholesale
Packaging
25300 AL MOEN D R IVE N OR TH OLMSTED , OH 44070
CORPORATE H EADQUARTER S: (800) 321-8809 F AX: (800) 848-6636
INTER NATI ON AL: (440) 962 -2000 FAX: (440) 962-2726
CUSTOMER SERVICE (USA): 800-882-0116 FAX: (888) 379 -2720
WWW . MOEN.C OM
Copyright Creative Specialties International Literature #BA1002
1. Position the assembled unit on the wall where desired.
2. Lightly mark the outline of the base.
3. Remove the mounting bracket from back of the fixture by loosening
the setscrew with the allen wrench provided.
4. Center the mounting bracket in the outline. Make sure the arrow is
pointing up and the setscrew holes are facing down.
5. Mark the hole locations.
6. Attach the bracket to the wall. Mounting into wood studs is
recommended whenever possible.
7. Mount the base on the bracket, followed by the end cap. Tighten the
setscrew to secure the assembly to the bracket.
Stock Number:______________________Robe Hook
By Creative Specialties
Installation Instructions:
Decorator Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.