Moen CSI1049 Specifications

Paper Holder posts are constructed
of zinc. Roller is plastic.
YB8000CH – Mounting Posts
Chrome Finish
Chrome Finish
YB8000OWB – Mounting Posts
Old World Bronze Finish
YB8099OWB – Mounting Posts
Old World Bronze Finish
YB8000PB – Mounting Posts
Polished Brass Finish
YB8099PB – Paper Roller
Polished Brass Finish
YB8000BC – Mounting Posts
Brushed Chrome Finish
Brushed Chrome Finish
YB8000SN – Mounting Posts
Satin Nickel Finish
YB8099SN – Paper Roller
Satin Nickel Finish
Cleaning Instructions:
1. Position Pro-Fit Installation Mounting Template on wall in desired location.
2. Using level align the template to the wall.
3. Using ¼” drill bit, drill one pilot hole for each post.
4. Position mounting post to wall by inserting wall anchor into pilot hole and pressing firmly.
5. Make sure that locking tab on mounting post is facing down (6 o’clock).
6. Tighten wall anchor screw while holding mounting post firmly in place.
7. Attach post by pressing firmly to mounting post until it clicks. (The square opening at the base of the post must be facing down to match-up with locking tab.)
8. Place spring roller into each post.
Stock Number:______________________Paper Holder By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Paper Holder
YB8099
Mason® Technical Specification
To preserve the fine finish of this product, clean only with a soft damp cloth. Dry well. Do not use commercial or abrasive cleaners.
25300 AL MOEN DR IVE NOR TH OLMSTED, OH 44070 CORPOR ATE H EADQUAR TERS: (800) 321 -8809 FAX: (800) 848-6636 IN TERN ATION AL: (440) 962 -2000 F AX: (440) 962-2726 CU STOMER SERVI CE (U SA): 800-882-0116 FAX: (888) 379-2720 WW W.MOEN.C OM
Copyright Creative Specialties International Literature #BA1228
Loading...