
YB5401AN – Tank Lever
Antique Nickel Finish
YB5401AZ – Tank Lever
Antique Bronze Finish
YB5401BN / Y5401BN – Tank Lever
Brushed Nickel Finish
YB5401CH – Tank Lever
Chrome Finish
YB5401PB – Tank Lever
Polished Brass Finish
YB5401ORB – Tank Lever
Oil Rubbed Bronze Finish
YB5401WR – Tank Lever
Wrought Iron Finish
25300 AL MOEN DR IVE NOR TH OLMSTED, OH 44070
CORPOR ATE H EADQUAR TERS: (800) 321-8809 FAX: (800) 848-6636
INTERN ATION AL: (440) 962-2000 FAX: (440) 962-2726
CUSTOMER SERVIC E (USA): 800-882-0116 FAX: (888) 379-2720
WWW .MOEN.C OM
Copyright Creative Specialties International Literature # BA1218
Tank Lever is constructed of zinc.
The arm mechanism is constructed of
plastic.
1. Remove existing tank lever.
2. Remove the arm mechanism from the new tank lever by loosening nut
(A).
3. Unscrew the tank nut (B). The thread for the tank nut is a left handed
thread.
4. Position the new tank lever through the tank hole. The tank lever handle
should be pointing aw ay from the toilet bow l.
5. Tighten nut (B). Depending on the curvature of the tank, there might be a
slight gap betw een the outside of the tank and the base of the lever.
6. Place the arm mechanism on the tank lever post. Adjust the arm up or
down as needed. Tighten nut (A) to secure the arm in place.
7. Adjust the arm mechanism from side to side as needed. Make sure the
arm does not come into contact w ith the tank wall or the flush
mechanism. Tighten screw (A) to lock the arm in place
8. Attach the flapper valve chain to one of the provided slots on the arm. Be
sure to eliminate any slack in the chain.
9. Make sure no water is leaking through the flapper w hen the handle is in
its normal position (not flushing)
Stock Number:______________________Tank Lever
By Creative Specialties
Installation Instructions:
Kingsley® Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.