Towel Ring post is constructed of
zinc. Ring is brass.
DN6786BN – Towel Ring
Brushed Nickel Finish
DN6786ORB – Towel Ring
Oil Rubbed Bronze Finish
Cleaning Instructions:
25300 AL MOEN DRIVE NORT H OLMST ED, OH 44070 (800) 321 -8809
FAX: (800) 848 -6636 INT ERNATIONAL : (440) 962-2000
FAX: (440) 962 -2726 CUSTOMER SERVICE (US A): 8 00 -882-0116
WWW.MOEN.COM
©Copyright Creati ve Speci alties Intern ational Literature #BA11 41
1. Remove the mounting post from the body by loosening the setscrew.
2. Position the mounting post on the wall at desired location with notch facing
down.
3. One at a time, place each anchor screw through the 2 large mounting post
holes, centered in the large hole. Using a Phillips screw driver, turn the
anchor screw while applying pressure. Screw will self drill and tap into
drywall. Do not over tighten.
4. Place skirt over mounting post.
5. Then place post assembly or robe hook over mounting post and skirt with
setscrew facing down.
6. Tighten set screw.
Stock Number:______________________Towel Ring
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Towel Ring
DN6786
Danbury® Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
Loading...