Paper Holder post is constructed of
zinc. Arm is brass.
DN6708BN – Paper Holder
Brushed Nickel Finish
DN6708ORB – Paper Holder
Oil Rubbed Bronze Finish
Cleaning Instructions:
253 00 AL M OEN DRIVE NORTH OLMSTED, OH 44070 (800) 321 -8809
FAX: (800) 848 -6636 INTERNAT IONAL: (440 ) 9 62-2000
FAX: (440) 962 -2 726 CUSTOMER SERVICE (USA): 8 00 -882-0116
WWW.M OEN.COM
1. Remove the mounting post from the body by loosening the setscrew.
2. Position the mounting post on the wall at desired location with notch facing
down.
3. One at a time, place each anchor screw through the 2 large mounting post
holes, centered in the large hole. Using a Phillips screwdriver, turn the
anchor screw while applying pressure. Screw will self drill and tap into
drywall. Do not over tighten.
4. Place skirt over mounting post.
5. Then place post assembly or robe hook over mounting post and skirt with
setscrew facing down.
6. Tighten setscrew.
Stock Number:______________________Paper Holder
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Paper Holder
DN6708
Danbury® Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
Copyright Creative Specialties International
Literature #BA1139
Loading...