Moen CSI1009 Specifications

25300 AL MOEN D RI VE NOR TH OLMSTED , OH 44070 COR PORATE H EADQU ARTERS: (800) 321-8809 F AX: (800) 848-6636 IN TER NATION AL: (440) 962-2000 FAX: (440) 962-2726 CU STOMER SERVI CE (USA): 800 -882-0116 FAX: (888) 379-2720 WW W. MOEN .C OM
Copyright Creative Specialties International
Towel Ring post is constructed of zinc. Ring is aluminum.
YB2286BN – Towel Ring
Brushed Nickel Finish
YB2286CH – Towel Ring
Chrome Finish
YB2286ORB – Towel Ring
Oil Rubbed Bronze Finish
Cleaning Instructions:
Directions below are for installation into drywall. If installing product into a stud, use the wood screws only.
1. Using ¼” drill bit, drill one pilot hole for post.
2. Position mounting post to wall by inserting wall anchor into pilot hole and pressing firmly.
3. Make sure that locking tab on mounting post is facing down.
4. Tighten wall anchor screw while holding mounting post firmly in place. Tighten anchor until resistance increases. DO NOT over tighten.
5. Using tip of screw bit press wall spikes (metal pieces on outer edge of mounting post) into drywall.
6. Attach post by pressing firmly to mounting post until it clicks. (The square opening at the base of the post must be facing down to match-up with locking tab).
Stock Number:______________________Towel Ring By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Towel Ring
YB2286
Brantford™ Technical Specification
To preserve the fine finish of this product, clean only with a soft damp cloth. Dry well. Do not use commercial or abrasive cleaners.
Literature #BA1397
Loading...