Page 1
CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
• Hydrolock® quick connect system
• Metal construction with various finishes identified by suffix
• 1/2" IPS shanks
• Designed to be installed on 8" to 16" centers
• Includes metal pop-up type waste assembly
OPERATION
• Acrylic knob style handles.
• Rotate either handle in a counterclockwise manner to open and
clockwise to close
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi, for products
made before October 2008 flow is limited to 2.2 gpm max (8.3 L/min)
CARTRIDGE
• 1224 cartridge design
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1,
and all applicable requirements referenced therein.
• Certified to ANSI/NSF 61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
WAR RA NTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
CHATEAU
®
Two-Handle Widespread
Lavatory Faucet
With Metal Waste Assembly
Model: 4962 series
With 50/50 Waste Assembly
Bulk Pack (6 per carton)
Model: 64962 series
NOTE: SPOUT INSTALLS THROUGH 1" MIN. DIA. HOLE.
VALVES INSTALL THROUGH 1-1/8" MIN. DIA. HOLE
Rev. 3/11
There is more than 1 version of this model.
Page down to identify the version you have.
4-1/4"
(108mm)
5-1/2"
(140mm)
8"
(203mm)
ESCUTCHEON DIA.
2-1/8"
(54mm)
4"
(101mm)
2-3/4"
(70mm)
Page 2
CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2" IPS shanks
• Designed to be installed on 8" to 16" centers
• Includes metal pop-up type waste assembly
OPERATION
• Acrylic knob style handles.
• Rotate either handle in a counterclockwise manner to open and
clockwise to close
FLOW
• Flow is limited to 2.2 gpm max (8.3 L/min)
CARTRIDGE
• 1224 cartridge design
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1,
and all applicable requirements referenced therein.
• Certified to ANSI/NSF 61/9
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
CHATEAU
®
Two-Handle Widespread
Lavatory Faucet
With Metal Waste Assembly
Models: 4962 series
NOTE: SPOUT INSTALLS THROUGH 1" MIN. DIA. HOLE.
VALVES INSTALL THROUGH 1-1/8" MIN. DIA. HOLE
Rev. 9/08
DISCONTINUED
STYLE
ESC
2-1/2"
(64mm)
DIA.
HOT
INLET
8"(203mm) MIN.
16"(406mm) MAX.
4"(102mm)
MIN.
2-7/8"
(73mm)
FLEXIBLE
CONNECTORS
5-1/8"
(130mm)
1-11/16"
(43mm)
1-1/4"(32mm)
MAX. DECK
THICKNESS
COLD
INLET
Loading...