Moen 7626C Specs
11 - 15/16 "
(303mm)
10 - 7/16"
(265mm)
10 - 9/16"
(268mm)
9"
(229mm)
9 - 1/16"
(230mm)
Max Deck Thickness
2 - 1/2"
(63mm)
25 - 3/16"
(635mm)
2 - 3/16"
(56mm)
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Pullout spray with 59" braided hose and Duralock™ Quick Connect installation
• Flexible supply lines with 3/8"compression fittings
OPERATION
• Spout rotates 110°
• Lever style handle
• Operates with less than 5 lbs. of force
• Operates in spray or stream mode in the pullout or retracted position
FLOW
• Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
• Engineered polymers, non-ferrous and stainless steel materials
STANDARDS
• Third party certified to IAPMO Green ASME A112.18.1/CSA B-125.1 and all applicable
requirements referenced therein including NSF 61/9 & 372
• Meets CalGreen and Georgia SB370 requirements
• Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
• The backflow protection system in the device consists of two independently
operating check valves, a primary and a secondary which prevent backflow
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installation
Specificatio ns
TILT™
Single Handle Pullout
Kitchen Faucet
Model: 7626 series
NOTE: THIS FAUCET IS DESIGNED TO BE
INSTALLED THRU 1 HOLE, 1-1/2" (38mm)
MIN. DIA.
1/16
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Loading...