Moen 7594BL Specs

ARBOR™

Single Handle High Arc

Pulldown Kitchen Faucet

Models: 7594 series

NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED

THRU 1 OR 3 HOLES, 1-1/2” (38mm) MIN. DIA.

Specifications

TO ORDER PARTS CALL: 1-800-BUY-MOEN

www.moen.com

FAUCET DESCRIPTION

• Metal construction with various finishes identified by suffix

• Hydrolock® quick connect installation

• Pullout spray with 68" braided hose

• Flexible supply lines with 3/8" compression fittings

• High arc spout provides height and reach to fill or clean large
pots while pull out wand provides the maneuverability for cleaning or rinsing

• 360˚ rotating spout provides ability to install handle on either side

OPERATION

• Lever style handle

• Temperature controlled by 100˚ arc of handle travel

• Operates with less than 5 lbs. of force

• Operates in stream or spray mode in the pullout or retracted position

• When filling a vessel outside the sink, the pause feature conveniently stops the
flow of water as the wand passes over the counter top

FLOW

• Flow is limited to 2.2. gpm (8.3 L/min) at 60 psi

CARTRIDGE

• 1255™ Duralast™ cartridge for Single-Handle Faucets

STANDARDS

• Third party certified to ASME A112.18.1/CSA B125.1 and all applicable
requirements referenced therein including NSF 61/9

• Complies with California Proposition 65 and with the Federal Safe Drinking
Water Act

• The backflow protection system in the device consists of two independently
operating check valves, a primary and a secondary which prevent backflow

•

ADA for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects

to the original consumer purchaser

• 5 year warranty if used in commercial installations

CRITICAL DIMENSIONS

(DO NOT SCALE)

7-7/8”

(199mm)

10-1/4" x 2-3/8"

(260mm x 60mm)

ESCUTCHEON

6-1/2”

(165mm)

2-3/16”

(56mm)

15-1/2”

(394mm)

8-1/4”

(210mm)

2-1/2” Max

Deck Thickness

1/2”

(13mm)

5-1/2”

(140mm)

2-3/4”

(70mm)

29-1/2”

(750mm)

2-3/4”

(70mm)

2-5/16”

(58mm)