Moen 6410 User Manual

CRITICAL DIMENSIONS

(DO NOT SCALE)

Specifications

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

DESCRIPTION

• Metal construction with various finishes identified by suffix

• 1/2" IPS connections

• Includes metal pop-up waste assembly
OPERATION

• Lever style handles

• Maximum handle(s) rotation angle is 90˚ to full on

• Rotate hot side counterclockwise to open (clockwise to close)

• Rotate cold side clockwise to open (counterclockwise to close)
FLOW

• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,

for products made before October 2008 flow is limited to

2.2 gpm max (8.3 L/min)

CARTRIDGE

• 1224 cartridge design

• Nonmetallic and stainless steel material
STANDARDS

• Third party certified to WaterSense,® CSA B125, ASME A112.18.1M,

ANSI A117.1, and all applicable requirements referenced therein

• Certified to ANSI/NSF 61/9

• Complies with California Proposition 65 and with the

Federal Safe Drinking Water Act

•ADA for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and

finish defects to the original consumer purchaser

• 5 year warranty if used in commercial installations

Rev. 7/08

EVA™

4" Lavatory Faucet

with Metal Waste Assembly

Models: 6410 series

Bulk Models: 66410, 66411*

(Bulk packed 6 per carton),

50/50 waste assembly

*Includes hot (red) and cold (blue) indicators.

NOTE: THIS FAUCET IS DESIGNED TO BE

INSTALLED THRU 3 HOLES, 1" MIN. DIA.

3-7/8“

(98mm)

Hot

1/2" NPT

3“

(76mm)

4“

(102mm)

Lift

Rod

Cold

1/2" NPT

6-3/16“

(157mm)

(108mm)

4-1/4“

(19mm)
Max. Deck
Thickness

3/4”

4“

(102mm)