6-15/16 "
(176mm)
13-3/4"
(349mm)
4-13/16"
(122mm)
3-1/2"
(89mm)
6-7/8"
(175mm)
2-1/2" (63mm)
Max Deck Thickness
3-1/2"
(89mm)
7/8"
(19mm)
1-1/16"
(27mm)
6-3/4"
(171mm)
2-1/16"
(52mm)
30-5/8"
(778mm)
FAUCET DESCRIPTION
• Reflex™ pulldown system offers smooth operation, easy movement and
secure docking
• Metal construction with various finishes identified by suffix
• Quick connect installation
• Pulldown spray with 68" braided hose
• Flexible supply lines with 3/8" compression fittings
• High arc spout provides the perfect height and reach for prep sinks while the
pulldown feature provides maneuverability for food preparation tasks
• 360˚ rotating spout provides ability to install handle on either side
• Faucet designed for handle to be mounted on right side
OPERATION
• Lever style handle
• Temperature controlled by 100˚ arc of handle travel
• Operates with less than 5 lbs. of force
• Operates in stream or spray mode in the pullout or retracted position
FLOW
• Flow is limited to 1.5 gpm (5.7 L/min) max at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
• Third party certified to IAPMO Green, ASME A112.18.1/CSA B125.1 and all
applicable requirements referenced therein including NSF 61/9G
• Meets CalGreen and Georgia SB370 requirements
• Complies with California Proposition 65 and with the Federal Safe Drinking
Water Act
• The backflow protection system in the device consists of two independently
operating check valves, a primary and a secondary which prevent backflow
•
ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
S p e c i fi c at i o n s
ALIGN™
Single Handle High Arc
Pulldown Prep/Bar Faucet
Models: 5965 series
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 1 HOLE, 1-1/2" (38mm) MIN. DIA.
(OPTIONAL 3-HOLE ESCUTCHEON 141002 AVAILABLE)
CRITICAL DIMENSIONS
(DO NOT SCALE)
5/13
TO ORDER PARTS CALL: 1-800-BUY-MOEN
www.moen.com