Moen 5923SRS Specifications
(19mm)
FAUCET DESCRIPTION
• Pulldown system oers smooth operation, easy movement and secure docking
• Metal construction with various nishes identied by sux
• Quick connect installation - Duralock™
• PowerClean™ spray technology
• Pulldown spray with 68" braided hose
• Flexible supply lines with 3/8" compression ttings
• High arc spout provides height and reach to ll or clean large pots while pulldown
wand provides the maneuverability for cleaning or rinsing
• Faucet designed for handle to be mounted on right side
OPERATION
• Lever style handle
• Temperature controlled by 100˚ arc of handle travel
• Operates with less than 5 lbs. of force
• Operates in stream or spray mode in the pullout or retracted position
FLOW
• Flow is limited to 1.5 gpm (5.7 L/min) max at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for single handle faucets
STANDARDS
• Third party certied to IAPMO Green, ASME A112.18.1/CSA B125.1 and all applicable
requirements therein including NSF 61/9 & 372
• Meets CalGreen and Georgia SB370 requirements
• Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
• The backow protection system in the device consists of two independently operating
check valves, a primary and a secondary which prevent backow
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and nish defects to the original
consumer purchaser
• 5 year warranty if used in commercial installations
Specifications
Align™
Single Handle Pre-Rinse Spring
Pulldown Kitchen Faucet
Models: 5923 series
NOTE: this faucet is designed to be installed
through 1 hole, 1-1/2" (38mm) min. dia.
(optional 3-hole escutcheon 141002 available)
1/16
6-15/16 "
(176mm)
Closed
3-1/2"
22-1/2"
(572mm)
(89mm)
Open
4-13/16"
(122mm)
8-3/4"
2-1/16"
(222mm)
(52mm)
Max Deck Thickness
2-1/2"
(63mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
10"
(254mm)
3-1/2"
(89mm)
30-5/8"
(778mm)
7/8"
www.moen.com
Loading...