Moen 4975 User Manual

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

CRITICAL DIMENSIONS

(DO NOT SCALE)

Specifications

FAUCET DESCRIPTION

• Metal construction with chrome plated finish

• Inlet shanks will accept 3/8" ball nose connections
OPERATION

• Knob style handles with hot and cold color indicators

• Rotate either handle counterclockwise to open

and clockwise to close

FLOW

• Aerator is limited to 2.2 gpm max (8.3 L/min)
CARTRIDGE

• 1224 cartridge design

• Nonmetallic stainless steel material
STANDARDS

• Designed and manufactured to comply with the

requirements of: CSA B-125 and ASME A112.18.1M and
all applicable requirements referenced therein

WARRANTY

• Lifetime limited warranty against leaks, drips and

finish defects to the original consumer purchaser

• 5 year warranty if used in commercial installations

CHATEAU®

Two Handle Laundry Faucet

Model: 4975

NOTE: Designed to be installed through

2 - 1” min. dia. holes 4” on center

Rev. 12/03

There is more than 1 version of this model.

Page down to identify the version you have.

2-1/2"

(64mm)

2"

(51mm)2"(51mm)

6-5/8"

(168mm)

5-9/16"

(141mm)

4-15/32"

(114mm)

3-11/64"

(81mm)

6-7/16"

(164mm)

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

CRITICAL DIMENSIONS

(DO NOT SCALE)

Specifications

FAUCET DESCRIPTION

• Chrome plated metal construction

• Inlet shanks will accept 3/8" ball nose connections
OPERATION

• Knob style handles

• Counterclockwise on/Clockwise off
FLOW

• Aerator is limited to 2.2 gpm max (8.3 L/min)
CARTRIDGE

• 1224 cartridge design

• Nonmetallic stainless steel material
STANDARDS

• Designed and manufactured to comply with the

requirements of: CSA B-125 and ASME A112.18.1M and
all applicable requirements referenced therein

WARRANTY

• Lifetime limited warranty against leaks, drips and

finish defects to the original consumer purchaser

• 5 year warranty if used in commercial installations

CHATEAU®

Two Handle Laundry Faucet

Model: 4975

NOTE: DESIGNED TO INSTALL

THRU 2 HOLES 1" (25mm) MIN. DIA.

AND 4" (102mm) ON CENTER

Rev. 11/99

3-1/8"

(79mm)

2"

(51mm)

ESCUTCHEON

6-3/4" (171mm) x 2-3/8" (60mm)



HOT INLET

COLD INLET

5-1/4"

(133mm)

5-1/2"

(140mm)

3/4" (19mm)

MAX. DECK 

THICKNESS

6-3/4"

(171mm)

2"

(51mm)