Moen 22826 User Manual
INK DESCRIPTION
6-1/2"
(165mm)
2"
(51mm)
16"
(406mm)
BOWL
4"
4"(102mm)
33"(838mm)
LENGTH
4"
(102mm)
2-3/4"(70mm)
R. TYP.
8-7/8"
(225mm)
3-1/2"(89mm)
DIA. TYP.
1-1/2"(38mm)
R. TYP.
1-7/8"
(48mm)
14"(356mm)
1-1/4"(32mm)
7"
(179mm)
29-1/4"
(743mm)
22"
(559mm)
WIDTH
10"
(254mm)
3-1/2"(89mm)
DIA. TYP.
1-1/2"(38mm)
DIA. TYP.
S
INK OVERALL DIMENSION
COUNTERTOP CUT-OUT
BOWL
DIMENSION
CONTINUOUS
"U" CHANNEL
SINK
CLAMP
COUNTERTOP
SEALANT MATERIAL
S
anufactured of 22 gauge, type 301 nickel-bearing
• M
stainless steel
• Two bowls are 14" x 16" x 6-1/2"
• The sink ledge has three fixture mounting holes,
1-1/2" in diameter and 4" on center
• Has two 3-1/2" diameter recessed drain openings
• Soundshield undercoating maximizes sound deadening
and inhibits condensation
• The exposed surfaces are polished to a lustrous
satin tone finish
• Includes all necessary mounting hardware
CUT OUT DIMENSIONS
• Cut out dimensions are 32-3/8" x 21-3/8",
with a 1-1/2" corner radius. A tolerance of plus
or minus 1/16" is acceptable
STANDARDS
• Third party certified by IAPMO to meet ASME A112.19.3
and all applicable specifications referenced therein.
Also meets applicable requirements of ANSI A117.1
WARRANTY
• Warranted for five years against material or
manufacturing defects
Specifications
Excalibur
Double Bowl Kitchen Sink
Model:
(EDE-3322-3)
®
22826
Rev. 4/05
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
Installation Detail
w
w
.moen.c
w
om
Loading...