Type: MFD−TP12−PT−A
Article No.: 106042
Sales text E/A MFD 24VDC,Trans., 2E x PT100
IP20, springloaded terminals
Ordering information
Description
Inputs
Digital 6
of which can be used as analog 2
Upper value of setting range 2
Outputs
Transistor 4
Temperature range
Notes concerning the product group
Accessories Page
24 V DC for MFD−CP8... (from
device version 08), temperature
range can be set.
−40...+90 °C
0...+250 °C
0...+400 °C
1
1 Ethernet gateway
101520
General
2 Connection cable
3 Programming software
4 PC programming cable
5 I/O expansion
6 Output expansion, bus module, coupling
module
7 Display/keypad
8 Power supply unit/CPU
9 I/O module
10 Memory card
11 easy−NET
12 Switched−mode power supply unit
280887
266040
256277
212314
212315
265251
265253
265254
256279
256283
212319
Standards
EN 61000−6−1/−2/−3/−4, IEC
60068−2−6, IEC 60068−2−27
Weight kg 0,14
Mounting
Fitted into the power supply
unit.
Terminal capacities
Solid mm20.24 (AWG 24 – 12)
Flexible with ferrule mm20.22.5 (AWG 24 – 12)
Standard screwdriver mm 3.5 × 0.6
Climatic environmental conditions
−25 to 55, cold as per IEC
Operating ambient temperature °C
60068−2−1, heat as per IEC
60068−2−2
Condensation
Take appropriate measures to
prevent condensation
Storage °C ... 40...+70
Relative humidity, non−condensing
(IEC/EN 60068−2−30)
% 5...95
Air pressure (operation) hPa 795...1080
Ambient conditions, mechanical
Pollution degree 2
Degree of protection IEC/EN 60529 IP 20
2
Vibrations (IEC/EN 60068−2−6)
Constant amplitude 0.15 mm Hz 10...57
Constant acceleration 2 g Hz 57...150
Mechanical shock resistance (IEC/EN
60068−2−27) semi−sinusoidal 15 g/11
Impacts 18
ms
Drop to IEC/EN 60068−2−31
Free fall, packaged (IEC/EN
60068−2−32)
Drop
height
mm 50
m 1
Mounting position horizontal, vertical
Electromagnetic compatibility (EMC)
Electrostatic discharge (IEC/EN
61000−4−2, Level 3, ESD)
Air discharge kV 8
Contact discharge kV 6
Electromagnetic fields (IEC/EN
61000−4−3, RFI)
Radio interference suppression (EN
55011)
V/m 10
EN 55011 Class B, EN 55022
Class B
Burst pulses (IEC/EN 61000−4−4,
level 3)
Supply cables kV 2
Signal lines kV 2
High−energy pulses (surge) (IEC/EN
61000−4−5)
High−energy pulses (surge) (IEC/EN
61000−4−5, level 2)
Immunity to line−conducted
interference to (IEC/EN 61000−4−6)
kV 2 (supply cables, symmetrical)
kV
0.5 (supply cables,
symmetrical)
V 10
Insulation resistance
Clearance in air and creepage
distances
EN 50178, UL 508, CSA
C22.2, no. 142
Insulation resistance EN 50178
Digital inputs 24 V DC
Number 6
Inputs can be used as analog inputs 2 (I11, I12)
Potential isolation
From power supply No
Between digital inputs No
From the outputs Yes
for Program code Yes
3
Rated operational voltage Ue V DC 24
On 0 signal Ue V DC < 5.0 (I1 – I4) < 8.0 (I11, I12)
On 1 signal Ue V DC >15.0 (I1 – I4) > 8.0 (I11, I12)
Input current on 1 signal
I11, I12 mA 2.2 (at 24 V DC)
Delay time from 0 to 1
Debounce ON ms 20
Debounce OFF ms
Normally 0.1 (I1 – I4), Normally
0.25 (I11 – I12)
Delay time from 1 to 0
Debounce ON ms 20
Debounce OFF ms
Normally 0.1 (I1 – I4), normally
0.2 (I11, I12)
Cable length (unscreened) m 100
Frequency counter
Quantity 4 (I1, I2, I3, I4)
Counter frequency kHz < 3
Pulse shape Square
Incremental counter
Quantity 2 (I1 + I2, I3 + I4)
Counter frequency kHz 3
Pulse shape Square
Signal offset 90°
Rapid counter inputs
Number 4 (I1, I2, I3, I4)
Counter frequency kHz < 3
Pulse shape Square
Cable length, screened m < 20
Analog inputs
Potential isolation
From power supply No
From the digital inputs No
From the outputs Yes
for Program code Yes
Input type DC voltage
Signal range V DC 0 – 10
Resolution, analog V 0,01
Resolution, digital V 0,01
Resolution Bit 10 (value 0 – 1023)
4
Input impedance k 11,2
Accuracy of actual value
two MFD devices % ± 3
Within a single device % ± 2
Conversion time, analog/digital ms Each CPU cycle
Input current mA < 1
Cable length screened m < 30
Dimensions
Moeller GmbH, Hein−Moeller−Str. 7−11, D−53115 Bonn
E−Mail: catalog@moeller.net, Internet: www.moeller.net, http://catalog.moeller.net
Copyright 2006 by Moeller GmbH. HPL−C2007G V2.1
5
Loading...