MOELLER EASY719 AC RCX Technical data

Type: EASY719−AC−RCX Article No.: 274116
Ordering information
Relay outputs Quantity 6 Power supply V DC 115/230 V AC
Description
12 digital inputs 6 relay outputs Screw terminals Timer Can be expanded using easy expansion units
Notes concerning the product group
Backup time (hours)
Operating time (years)
1
General
EN 55011, EN 55022, IEC/EN
Standards
61000−4, IEC 60068−2−6, IEC
60068−2−27 Dimensions (W × H × D) mm 107.5 × 90 × 58 (6 PE) Weight kg 0,3
Top−hat rail IEC/EN 60715, 35 Mounting
mm or screw fixing using fixing
brackets ZB4−101−GF1
(accessories)
Terminal capacities
Solid mm20.24 (AWG 22 – 12) Flexible with ferrule mm20.22.5 (AWG 22 – 12) Standard screwdriver mm 3.5 × 0.8 Max. tightening torque Nm 0,6
Climatic environmental conditions
−25 to 55, cold as per IEC
Operating ambient temperature °C
60068−2−1, heat as per IEC
60068−2−2
Condensation
Take appropriate measures to
prevent condensation LCD display (clearly legible) °C 055 Storage °C −40/+70 Relative humidity, non−condensing
(IEC/EN 60068−2−30)
% 5 – 95
Air pressure (operation) hPa 795 – 1080 Corrosion resistance IEC/EN 60068−2−42 4 days SO2cm3/m310 IEC/EN 60068−2−43 4 days H2S cm3/m31
Ambient conditions, mechanical
Pollution degree 2 Degree of protection (IEC/EN
60529)
IP 20
Vibrations (IEC/EN 60068−2−6) Constant amplitude 0.15 mm Hz 10 – 57 Constant acceleration 2 g Hz 57 – 150 Mechanical shock resistance
(IEC/EN 60068−2−27)
Impacts 18
semi−sinusoidal 15 g/11 ms Drop to IEC/EN 60068−2−31 Drop height mm 50 Free fall, packaged (IEC/EN
60068−2−32)
2
m 1
Mounting position horizontal/vertical
Electromagnetic compatibility (EMC)
Electrostatic discharge (IEC/EN 61000−4−2, Level 3, ESD)
Air discharge kV 8 Contact discharge kV 6 Electromagnetic fields (IEC/EN
61000−4−3, RFI) Radio interference suppression
(EN 55011)
V/m 10
EN 55011 Class B, EN 55022
Class B Burst pulses (IEC/EN 61000−4−4,
level 3) Supply cables kV 2 Signal lines kV 2 High−energy pulses (surge)
(IEC/EN 61000−4−5) High−energy pulses (surge)
(IEC/EN 61000−4−5, level 2)
kV
kV
2 (supply cables, symmetrical,
EASY...AC)
0.5 (supply cables,
symmetrical, EASY...DC) Immunity to line−conducted
interference to (IEC/EN
V 10
61000−4−6)
Insulation resistance
Clearance in air and creepage distances
EN 50178, UL 508, CSA
C22.2, no. 142 Insulation resistance EN 50178
Backup/accuracy of the real−time clock
Accuracy of the real−time clock Normally ± 5 (± 0.5 hyear)
Repetition accuracy of timing relays
Accuracy of timing relays (of values)
% ± 1
Resolution Range “S” ms 10 Range “M:S” s 1 Range “H:M” min 1
Retentive memory
Write cycles of the retentive memory
1000000 (106)
Power supply
Rated operational voltage U
e
100/110/115/120/230/240 AC
V
(+10/−15 %) Admissible range V AC 85 – 264 Frequency Hz 5060 (± 5%)
3
Input current at 115/120 V AC 60 Hz mA Normally 70 at 230/240 V AC 50 Hz mA Normally 35 Voltage dips (IEC/EN 61131−2) ms 20 Power loss at 115/120 V AC VA Normally10 at 115/230 V AC VA Normally10
Digital inputs 115/230 V AC
Number 12 Status indication LCD−display (if present) Potential isolation From power supply No Between digital inputs No From the outputs Yes Rated voltage L (sinusoidal) On 0 signal V AC 0 – 40 On 1 signal V AC 79 – 264 Rated frequency Hz 50 – 60 Delay time Delay time (0 – 1/1 – 0) I1 to I6, I9
to I12, R1 to R12 Debounce ON 50/60 Hz ms 8066 Debounce OFF 50/60 Hz ms 2016 Delay time I7, I8 (1 – 0) Debounce ON 50/60 Hz ms 8066 Debounce OFF 50/60 Hz ms 2016 Delay time I7, I8 (0 – 1) Debounce ON 50/60 Hz ms 8066 Debounce OFF 50/60 Hz ms 2016 Max. admissible cable length (per
input) I1 to I6 m 40 I7, I8 m Normally100 I9 to I12 m Normally40
Relay outputs
Number 6 Outputs in groups of 1 Parallel switching of outputs for
increased output
4
Not permissible
Protection of an output relay
Miniature circuit−breaker B16
or fuse 8 A (slow) Potential isolation From power supply Yes From the inputs Yes From the PC interface, memory
card NET network, EASY−Link
No
Safe isolation V AC 300 Basic insulation V AC 600 Lifespan, mechanical Operations × 10610 Contacts Conventional thermal current (10 A
UL) Recommended for load: 12 V
AC/DC Short−circuit−proof cos = 1,
characteristic B16 at 600 A Short−circuit−proof cos = 0.5 to
0.7, characteristic B16 at 900 A Rated impulse withstand voltage
U
of contact coil
imp
Rated operational voltage U Rated insulation voltage U Safe isolation to EN 50178
between coil and contact
e
i
A 8
mA > 500
A 16
A 16
kV 6
V AC 250 V AC 250
V AC 300
Safe isolation to EN 50178 between 2 contacts
V AC 300
Making capacity AC−15, 250 V AC, 3 A (600
Ops./h) DC−13 L/R 150 ms 24 V DC, 1 A
(500 Ops./h)
Operations 300000
Operations 200000
Breaking capacity AC−15, 250 V AC, 3 A (600
Ops./h) DC−13 L/R 150 ms 24 V DC, 1 A
(500 Ops./h)
Operations 300000
Operations 200000
Filament bulb load 1000 W at 230/240 V AC Operations 25000 500 W at 115/120 V AC Operations 25000 Fluorescent lamp load
5
Fluorescent lamp load 10 × 58 W at 230/240 V AC
With upstream electrical device Operations 25000 Uncompensated Operations 25000 Fluorescent lamp load 1 × 58 W at
230/240 V AC, conventional,
Operations 25000
compensated Switching frequency Mechanical operations × 10610 Switching frequency Hz 10 Resistive load/lamp load Hz 2 Inductive load Hz 0,5 UL/CSA Uninterrupted current at 240 V AC A 10 Uninterrupted current at 24 V DC A 8 AC Control Circuit Rating Codes
(utilization category)
B 300 Light Pilot Duty
Max. rated operational voltage V AC 300 Max. thermal uninterrupted current
= 1 at B 300 Max. make/break capacity 1 at B
300
A 5
VA 3600360
DC Control Circuit Rating Codes
(utilization category)
R 300 Light Pilot Duty
Max. rated operational voltage V DC 300 Max. thermal uninterrupted current
at R 300
A 1
Max. make/break capacity at R 300 VA 2828
Notes Dimensions
Notes
For additional Technical Data EASY5... and EASY7... AWB2528−1508GB,
EASY8... AWB2528−1423D
Dimensions
6
Moeller GmbH, Hein−Moeller−Str. 7−11, D−53115 Bonn E−Mail: catalog@moeller.net, Internet: www.moeller.net, http://catalog.moeller.net Copyright 2006 by Moeller GmbH. Subject to modifications. HPL−C2006GB−INT V2.3
7
Loading...