Mody Pumps MHC8A User Manual
MHC SERIES - HI CHROME
SLURRY SUBMERSIBLE PUMP
MHC8B SERIES
ELECTRIC SUBMERSIBLE SLURRY
PUMP - 28% HI-CHROME
DESIGNED FOR PORTABLE AND
ABRASIVE APPLICATIONS
MATERIALS OF CONSTRUCTION AND ENGINEERING DATA
PUMP END
pH Range 5 - 12
Impeller Type Two Vane Semi-Open
Max. Temperature of Pumped Fluid: 104°F/40ºC
Max. Starts/Stop Per Hour: 15
Max. Submergence: 65 Feet
MOTOR
4-pole induction continuous rated motor with squirrel cage rotor. Bi-metallic
switches (thermals) embedded in stator winding to protect against overheating.
Stator insulation class 'H' (180ºC), 1.15 Service Factor.
POWER SUPPLY
3 phase, 60 Hz, AC Supply, 208, 230,460,575. Other voltages available upon
request.
BALL BEARINGS
The rotor shaft is carried on a double row angular contact ball bearing which
carries the high thrust and radial loads. The Upper bearing is a roller bearing;
both bearings are enclosed with high temperature grease containing
special Anti-corrosion additive.
POWER CABLE
Waterproof/oil proof, rubber-insulated, neoprene-sheathed copper conductor
flexible cable, 50ft. (15m) length standard. Type SOOW in North America,
EPR in the Middle East and HO7RN in the EU with Trailing cable for thermals
and seal probe sensor.
SHAFT SEALS
Double Mechanical Seals, outer and inner are Silicon Carbide, both rotating and
stationary faces. Equipped with Moisture Sensor to detect progressive seal wear.
HYDRAULICS
Two Vane Semi-Open Impellers, Hydrodynamically balanced with improved flow
pattern contribute to a virtually clog-free pump.
COOLING
Motor casing with large surface area ensure efficient heat dissipation and low
temperature rise. Shrink fitted stators and short shaft overhang facilitate cooling.
MATERIALS OF CONSTRUCTION
Pump Casing: 28% Hi-Chrome Iron
Impeller: 28% Hi-Chrome Iron
Suction Cover: 28% Hi-Chrome Iron
Agitator (Optional) 28% Hi-Chrome Iron
Shaft: 403 Stainless Steel
Hardware: 304 Stainless Steel
“O” Rings: Nitrile Rubber (Viton - Optional)
Mech. Seals: SC/SC (Upper & Lower)
SURFACE TREATMENT
Primer with Epoxy paint.
Mody Pumps® Inc.
2166 Zeus Court, Bakersfield, CA 93308. USA
Tel.: (661) 392-7600 • Fax: (661) 392-7601
http://www.modypump.com
E-mail: sales@modypump.com
MHC SERIES - HI CHROME
SLURRY SUBMERSIBLE PUMP
MHC8B SERIES
PORTABLE WET PIT
INSTALLATION
PERFORMANCE CURVES
Due to continuous product development, specifications are subject to
change without notice. Vol. 1, Rev. 1, Nov. 2009
Loading...