Modern Electronics Factory MEF-1065 User Manual

Connecting to a Television / DVD / Ext. Device
Composite Video output
Require an RCA video cable.
1. Plug the included RCA audio/video cable into the VIDEO OUT and a
composite video input on a television.
2. Adjust the television to the correct input setting.
3.
When playing CDG discs, the Karaoke Machine will output written lyrics to the connected television
RCA Audio Output
Requires an RCA audio cable.
1. Plug the included RCA audio/video cable into the AUDIO OUT and a RCA audio input on a television or stereo system.
2. Adjust the television or stereo system to the correct input setting. When playing the disc, the Karaoke Machine will output audio to the
3. connected television or stereo system.
REAR VIEW OF MAIN UNIT
INPUT
IN
INPUT
IN
INPUT
IN
TO TV OR HOME STEREO SYSYTEM
OR
10
Connecting Bluetooth to Your Smartphone
1.
Slide the SOURCE selector to BT/LINE IN position to connect your external Bluetooth device and the display will show bt and flash.
2. Set the Bluetooth function of your external device to ON and begin searching for devices.
Note: The effective distance between your external device and this apparatus is 10 meters (30 feet).
3. Once “ karaoke ” appears on the paired device list of your external device, select it. Notes: If cannot connect, press PAIR button to reconnect again.
4. If you are asked for a password, enter “0000”
5. When both devices are successfully connected an audible chime will sound and the display will show bt and stop flash, now you are ready to play music wirelessly from your device.
6.
Press the PLAY button of the unit or external Bluetooth device to start music playback.
7. Press the NEXT / PREV of the unit or external Bluetooth device to switch between music tracks. Note: After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device. If your device should become unpaired or your find it is unable to connect, repeat the above steps or press & hold the PAIR button again.
Using Microphone
Requires a microphone (included) .
1. Plug the microphone (see below figure) into the MIC 1 INPUT or MIC 2
INPUT.
2. Slide the ON /OFF switch of
MIC
3. Use the
VOLUME
microphone.
MICROPHONE
,
dial to adjust the volume of audio sound from the
11
AVC
ECHO
LINE IN ( AUX In / AUDIO In )
Connect Ext. device & Sound from Main Unit Speaker
Using AVC / ECHO / BALANCE
The AVC (Automatic Voice Control) dial adjusts the volume of the unit to compensate for varying levels of volume from the microphone. Turn the dial to adjust the degree to which the Automatic variations in volume.
Adjust the ECHO dial to enhance your voice for a concert hall effect.
BALANCE
Rotate the BALA
NCE dial to hear the music and vocals or to hear the music
only. Notes:To use the BALANCE dial, a CD+G disc must be used. Otherwise it will operate as a standard BALANCE control.
To conne
ct a MP3 Player or other Audio Device you will need a 3.5mm
Auxiliary Cable.
1. Connect a 3.5mm Auxiliary Cable to the LINE IN jack on front of unit and to
the Audio Output or Phones on the audio device you wish to play.
2.
Slide the SOURCE selector to BT/LINE IN position.
3. Turn on both units.
4. After the connection, the external device will sound from speakers of your unit.
Please note:-If not use the this function, please unplug it and automatically
change to Bluetooth mode..
Voice Control compensates for
TO HE
ADPH ONE INP UT
12
Connect low impedance 3.5mm ( max. 32 ohm) stereo headphone / earphone (not
Connect the Headphone or Earphone
include) to PHONES jack of main unit. The speaker is automatically disconnected when the headphone / earphone plug in.
Water Dancing
The disco lights on the side of the unit will light up / down and the water lights will bounce up and light depending on the music being played or the live singing performance. The louder the music / singing, the higher the water lights will bounce
Notes:
If the water light do not bounce raise the volume to activate.
To turn the lights on with water dancing: Slide the LIGHTS selector to ON position.
13
Specification
AC Power Adapter Connect DC Jack
Batteries Power
Use included adapter AC~ Input 120V / 60 Hz ,DC Output 5V , 1500mA
UM2 or C Size battery x 6 pcs ( not included)
Support
CD Player
Bluetooth
Master Power Output
Loud Speakers Spec
CDs and CDG disc
4.75 / 3.25 inch
Version 4.2 + EDR
3W (RMS) 10% THD 3 Inch, 5 Watt , 3 Ohm
GRAPHICS
Specifications are typical, individual units might vary. They are subject to continuous improvement without notice and without incurring any obligation.
IC STATEMENT This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada . Son fonctionnement est soumis aux deux conditions suivantes : ( 1 ) Ce dispositif ne peut causer d'interférences ; et ( 2 ) Ce dispositif doit accepter toute interférence , y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil.
The distance between user and products should be no less than 20cm la distance entre l'utilisateur et les produits devraient être au moins 20 cm
14
Loading...