Tabeoke
Portable Bluetooth® Karaoke System
ISM398BT
INSTRUCTION MANUAL
Please read before using this unit.
is a registered trademark of The Singing Machine Company, Inc.
THE SINGING MACHINE
iSM398BT_IB_ENG (DOM).indd 1 15/2/2016 10:37 AM
®
Warnings
FCC WARNING: Changes or modifications not expressly
approved by the party responsible for compliance could void
your authority to operate the equipment.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The Caution marking is located on the bottom panel.
DANGEROUS VOLTAGE: The lightning flash with arrowhead
symbol within an equilateral triangle is intended to alert the
user to the presence of uninsulated dangerous voltage within
the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
ATTENTION: The exclamation point within an equilateral
triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions
in the literature accompanying this product.
DRIPPING WARNING: This product shall not be exposed to dripping or
splashing, and no objects filled with liquids, such as vases, shall be placed
on the product.
VENTILATION WARNING: The normal ventilation of the product shall not be
impeded for intended use.
SAFETY VERIFICATION: This device is made and tested to meet safety
standards of the FCC, requirements and compliance with safety performance
of the U.S. Department of Health and Human Services and also with FDA
Radiation Performance Standards 21 CFR Subchapter.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
FCC ID : SSMISM398BT
FCC WARNING: This equipment may generate or use radio frequency
energy. Changes or modifications to this equipment may cause harmful
interference unless the modifications are expressly approved in the
instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
This device complies with part 15 of the FCC Rules. Operation is subjec t
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The rating information is located at the bottom of the unit.
INDUSTRY CANADA NOTICE:
This device complies with Industry Canada Iicense-exempt RSS standard(s).
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that
may cause undesired operation of the device.
CAN ICES-3(B)/NMB-3(B)
Important Safety Information
1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all Instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in
accordance with the Manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. When the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
iSM398BT_IB_ENG (DOM).indd 1 15/2/2016 10:37 AM
12. Use only with a cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
15. WARNING: To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture. Do not place objects
filled with water, such as a vase, on the apparatus.
16. The AC mains plug is used as the power disconnect device
and it should remain readily accessible and operable during
intended use. In order to completely disconnect the apparatus
from power, the mains plug should be completely removed
from the AC outlet socket.
17. C AUTION: To reduce the risk of fire or explosion, do not expose
batteries to excessive heat such as sunshine, fire or other
heat sources.
— 1 —
Location of Controls
4
1
Front
1
2
3
5
6
7
8
1. Carrying Handle
2. Mic 1 Jack
3. Power Indicator
4. Power ON/OFF Button
5. ECHO Control
6. MIC VOLUME Control
Rear
7. Left Speaker
8. Cradle
9. Mic 2 Jack
10. Bluetooth Indicator
11. PLAY/PAUSE/PAIR
Button
9
10
11
12
13
14
12. MASTER VOLUME
Control
13. BALANCE Button
14. Right Speaker
2
3
4
1. Battery Compartment
(bottom of unit)
2. AUDIO OUT Left Jack
3. AUDIO OUT Right Jack
— 2 —
4. AUX IN Jack
5. DC IN Jack
5
iSM398BT_IB_ENG (DOM).indd 2 15/2/2016 10:37 AM
Connection
Connecting this Unit to an External Stereo, etc.
To listen to this unit’s audio through a
REAR VIEW OF EXTERNAL UNIT
stereo or other external unit, connect
as follows:
REAR VIEW
Connect the Audio cables red and white
plugs to the red and white AUDIO OUT
jacks on the iSM398BT and the other
ends to the external unit red and white
Audio In jacks.
Note: Audio cables are not included.
AUDIO OUT
(white - L
red - R)
Connecting a Digital Music Player to this Unit
Your Singing Machine is designed to connect to your favorite
digital music device (iPod, MP3 player, etc.). Simply connect your
device by using an appropriate audio cable (3.5mm audio cable
not included). When connected, the Aux function is automatically
selected. See page 7 for more details.
Inserting Batteries
Lift battery door to reveal battery
1
compartment.
Insert four (4) “C” size alkaline batteries (not
2
included) as indicated by the polarity in the
battery compartment.
RCA cables
AUDIO
INPUT
RL
Replace battery door tightly before operating
3
BATTERY PRECAUTIONS:
Follow these precautions when using batteries in this device:
1. Warning – Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
2. Use only the size and type of batteries specified.
3. Be sure to follow the correct polarity when installing the batteries as indicated in the battery
compartment. A reversed battery may cause damage to the device.
4. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon-zinc) or
old batteries with fresh ones.
5. If the device is not to be used for a long period of time, remove the batteries to prevent damage or
injury from possible battery leakage.
6. Do not try to recharge a battery not intended to be recharged; it can overheat and rupture. (Follow
battery manufacturer’s directions.)
7. Remove batteries promptly if consumed.
8. Clean the battery contacts and also those of the device prior to battery installation.
— 3 —
iSM398BT_IB_ENG (DOM).indd 3 15/2/2016 10:37 AM
Connection
Connecting the Microphone(s)
Connecting to AC Power
Insert the small end of the AC adapter
into the DC IN jack on the rear of the
unit. Insert the other end (with the
2 blades) into a conveniently located
AC outlet having 110-240V AC,
50/60Hz.
Insert a microphone’s plug into the Mic
1 jack u. Insert the other microphone’s
plug into the Mic 2 jack v (if desired).
Note: Do not drop or tap the mic, as
damage to the mic or speakers may
occur. Do not spin the microphone
around for the same reason.
Notes:
• Only use the supplied AC adapter.
Failure to do so may cause a fire or
damage the unit.
•
The AC adapter included with this unit is for its use only. Do not use it with other equipment.
• Turn off the unit before unplugging the AC adapter from the unit to avoid damaging the unit.
• When the unit is not going to be used for a long time, disconnect the AC adapter from
the AC outlet.
• If the unit acts erratically or malfunctions, unplug the unit, wait 20 seconds and plug it
back in.
• Never use an AC adapter that is damaged. Route power lead in a safe manner and make
sure it is not subjected to trapping or pinching. If the power lead is damaged, refer to a
qualified service agent.
— 4 —
iSM398BT_IB_ENG (DOM).indd 4 15/2/2016 10:37 AM
Operation
Using a Bluetooth Device
u
Connect the unit as described
1
previously. Press the Power ON/OFF
v
button u to turn the unit on; the
Power indicator will light.
The Bluetooth indicator v will blink
2
rapidly to indicate it is in the Pairing
mode.
Note: You can also press and hold the PLAY/
PAUSE/PAIR button to initiate the Pairing
mode.
Tabeoke is a portable karaoke system that
works with any tablet that supports karaoke
Apps. Download the Singing Machine Mobile
Karaoke App powered by Stingray Karaoke
available on iTunes for iOS devices. Try the
Karaoke Anywhere for Android, or the Red
Karaoke App for Windows Mobile. Use your
Bluetooth device to wirelessly stream music
and karaoke songs, with lyrics, through any of
the mobile apps listed above.
For more information, visit
www.singingmachine.com
Switch on the Bluetooth function of
3
your Bluetooth compatible device
within three feet of the iSM398BT. You
will see “Singing Machine” appear on
your device’s search list.
Note: Please always refer to the user
manual of your Bluetooth device for
detailed instructions.
Select “Singing Machine” to start
4
pairing. Wait for completion of the
pairing and the Bluetooth indicator will
light solid.
Notes:
• If your Bluetooth device prompts you for
a passcode during the pairing process,
please enter “0000” to connect.
• If pairing fails, repeat steps 2-4.
• If you have paired before, a list of
previously searched results will be
displayed. Select “Singing Machine” again.
• On some Bluetooth devices (i.e.,
computers), once pairing is complete,
you must select your Bluetooth device as
“Use as Audio Device” or similar.
PLAY/PAUSE: Press the Play/Pause
5
button on the Bluetooth device or on
the iSM398BT to start.
— 5 —
iSM398BT_IB_ENG (DOM).indd 5 15/2/2016 10:37 AM
Operation
Using a Bluetooth Device
Make sure the Bluetooth device has
6
7
8
9
its volume set to mid range, then
adjust the volume to a comfortable
level using the MASTER VOLUME
control U.
Connect microphone(s) as shown on
page 4, and slide the microphone’s ON/
OFF switch to the ON position. Also, if
desired, place your Bluetooth device
onto the cradle after it is paired.
Adjust the MIC VOLUME control W
as desired. Increasing this control
will increase the volume of the
respective microphone.
ECHO: Adjust the Echo control X to
add an echo effect to your voice.
BALANCE: Balance allows you to
10
Note: If not listening to a multiplex recording,
this knob will control the balance on the left
and right speakers.
11
12
— 6 —
iSM398BT_IB_ENG (DOM).indd 6 15/2/2016 10:37 AM
eliminate the lead singer’s voice
by rotating the knob at to the left
when playing a multiplex recording,
or eliminate the music by rotating
the knob to the right. This feature
only works with multiplex media.
Control the Bluetooth device using
its own controls.
Press the Power ON/OFF button
al to turn the unit off; the Power
indicator will turn off.
Operation
Using the AUX IN Jack
Connect the unit as described
1
previously. Press the Power ON/OFF
button u to turn the unit on; the
Power indicator will light.
Connect the external unit to the AUX
2
Note: It is highly recommended to set the
volume on the auxillary unit to 1/3 or lower
to avoid distortion.
3
4
5
IN jack v. When connected, the Aux
function is automatically selected.
Adjust the volume to a comfortable
level using the MASTER VOLUME
control w.
Connect microphone(s) as shown on
page 4, and slide the ON/OFF switch
to the ON position.
Adjust the MIC VOLUME control y
as desired. Increasing this control
will increase the volume of the
respective microphone.
Adjust the Echo and Balance effects
6
7
— 7 —
iSM398BT_IB_ENG (DOM).indd 7 15/2/2016 10:37 AM
U as shown on page 6.
Press the Power ON/OFF button
u to turn the unit off; the Power
indicator will turn off.
Troubleshooting Guide
Should this unit exhibit a problem, check the following before seeking service:
No Power.
• Power is not on; press the Power ON/OFF button to turn the unit on.
• Make sure the unit is connected to AC power.
• Batteries are dead or not inserted properly. Insert batteries as shown on page 3.
No Sound – General.
• Master Volume is set to minimum; raise volume.
• Cable connected to AUX IN jack. When a cable is connected, the Aux In function is
selected. Unplug to select Bluetooth.
No Sound from the Microphone.
• Make sure microphone is firmly connected to the MIC1 or MIC2 jack.
• Make sure microphone is turned on; see page 6.
• Make sure the MIC VOLUME control is not on the lowest setting.
• MASTER VOLUME is set to minimum; raise volume.
The Bluetooth device cannot be paired or connected with the unit.
• Turn the power off; wait five seconds then turn power back on for automatic reconnection with the paired device.
• You have not activated the Bluetooth function of your device; see page 5 or refer to the
Bluetooth device’s user manual.
• The unit is not in pairing mode; see page 5 to pair.
The Music playback is not available on the unit after successfully connecting the Bluetooth.
• Ensure your Bluetooth device can support the A2DP Bluetooth profile.
— 8 —
iSM398BT_IB_ENG (DOM).indd 8 15/2/2016 10:37 AM
Specifications
AUDIO
Output Power (Maximum) ........................................................................................2W + 2W (RMS)
Output Impedance ....................................................................................................................... 4 Ohms
BLUETOOTH
Bluetooth Version ...................................................................................................................V2.1 + EDR
Working Distance ...........................................................Up to 10 meters measured in open space
GENERAL
Power (AC) ................................................................................................. AC 110-240 V, 50/60 Hz
Power (DC) .............................................................................................................. DC 6V (4 x “C” cell)
DC Adapter ...............................................................................DC5V, 1.0A Center Positive Adapter
Dimensions .........................................................14.8 x 6.2 x 9.1 inches / 37.6 x 15.7 x 23.1 cm
Weight .........................................................................................................................2.51 lbs / 1.14 kg
Microphone ....................... -73 dB 600 Ohms impedance with 6.3 mm Dynamic Microphone
Specifications are subject to change without notice.
— 9 —
iSM398BT_IB_ENG (DOM).indd 9 15/2/2016 10:37 AM
LIMITED WARRANTY AND SERVICE
THE SINGING MACHINE COMPANY, INC. warrants this product to be free from defects in
material and workmanship for a period of ninety (90) days from date of sale to the original
consumer purchaser. Product will be repaired or replaced with a new or reconditioned
product at no additional charge if it is proven to be defective within the ninety (90) day
period when said product is returned at customer expense within the warranty period.
THIS WARRANTY DOES NOT COVER ANY EXPENSES INCURRED IN THE REMOVAL AND
REINSTALLATION OF THIS PRODUCT.
This warranty does not apply to any product damaged by accident, misuse, abuse, improper
line voltage, fire, water, lightning or other acts of God, or any parts or services furnished
by anyone else. The warranty does not cover cartons, carrying cases, batteries, broken
or damaged cabinets, or any items used in connection with the product or consequential
damage due to defect in the product. This warranty does not cover products sold AS IS or
Re-manufactured units or units sold outside the SMC distribution channel.
ALL IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THIS WARRANTY. THIS
IS THE COMPLETE WARRANTY AND NO OTHER EXPRESSED WARRANTY IS VALID. SOME
STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR
AN EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTITAL DAMAGES, SO THE
ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.
This warranty gives you specific legal rights and you may also have other rights, which may
vary from state to state.
IF THE UNIT IS OUTSIDE THE WARRANTY PERIOD, please call us first at (866) 670-6888
or email us at customerservice@singingmachine.com.
SERVICE CENTER:
THE SINGING MACHINE COMPANY
4060 E. Jurupa Street, Unit B
Ontario, CA 91761
USA
Visit our website
www.singingmachine.com
— 10 —
iSM398BT_IB_ENG (DOM).indd 10 15/2/2016 10:37 AM
Visit our website:
www.singingmachine.com
THE SINGING MACHINE is a registered trademark of The Singing Machine Company, Inc.
iSM398BT_IB_ENG (DOM).indd 1 15/2/2016 10:37 AM
4060 E JURUPA STREET, UNIT B, ONTARIO, CA 91761-1413, USA
Copyright © 2016 The Singing Machine Company, Inc. All Rights Reserved.
PRINTED IN CHINA
398-1602-ENG01
Loading...