Modern Electronics Factory 393XD300 Users manual
Thank you for purchasing iDance Audio System
PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATION THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFEREN
0
``1
CE.
WHAT’S IN THE BOX
Contents
1. iDance XD300
Control Panel
Tower Speaker
Tower Base
2. AC-DC Power Adapter
3. Instruction Manual4. Accessory
OVERVIEW
The iDanceXD300is a Wireless all-in-one DJ Party box System with an integrated
mixer, which accepts microphone, guitar, line-in audio,and stereo Bluetooth wireless
audio up to 10 meters.Only few simple steps to pair your device!!
The XD300is perfect for DJ,house / pool / yard party,or for karaoke applications.Take
your sound with you on the go!!
Thank you, and congratulations on your choice ofiDance’sXD300!
1
FCC and IC WARNING
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
z Reorient or relocate the receiving antenna.
z Increase the separation between the equipment and receiver.
z Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
z Consult the dealer or an experienced radio/TV technician for help.
“This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 20 centimeters between the radiator and your body.”
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.”
Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitationestautorisée aux deux conditions
suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le
brouillageest susceptible d'encompromettre le fonctionnement.
2
WARNING
WARNING: T O REDUCE THE RI SK OF FIRE O R SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN ORMOISTURE
CAUTION
RISK OF ELECTRICSHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF FIRE OR SHOCK, DO
NOT REMOVE COVER OR BACK. NO USER-SERVICEABLE
PARTS INSIDE.REFER SERVICING TO QUALIFIED
PERSONNEL
The exclamation mark inside an equilateral
triangleisintended to alert user of the presence of
theimportantoperatingand
uctions
in the literature accompanying the product.
maintenance(servicing)instr
The lightning flash with arrowhead symbol inside
an equilateral triangle is intended to alert User of
the presence of un-insulated“hazardous voltage”
within the product’s enclosure, which may be of
sufficient magnitude to induce a risk of electric
shock to persons
ClassIIequipmentsymbol
Thissymbolindicatesthat
theunithasadoublesystem.
¾ NOTES
Please do not attempt to open the back cover or power adapter as opening or
removing the covers may expose you to dangerous voltage or other hazards,and it
will also cause the restricted servicing to be disabled: There are no user servicing
components inside.
¾ NOTES
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus as set out in the Radio Interference Regulations of Industry
Canada. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
¾ NOTES
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
Consult the dealer or an experienced radio/TV technician for assistance.
IMPORTANT SAFETY INSTRUCTIONS
3
Loading...