Modern Electronics Factory 393BB10K Users manual
Thank you for purchasing iDance Audio System
PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATION THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFEREN
0
``1
CE.
WHAT’S IN THE BOX
Contents
1. iDance BB10K
2. Instruction Manual
OVERVIEW
The iDance BB10K is a Wireless all-in-one DJ Party box System with an integrated
mixer, which accepts microphone, guitar, line-in audio, and stereo Bluetooth wireless
audio up to 10 meters. Only few simple steps to pair your device!!
The BB10K is perfect for DJ, house / pool / yard party, or for karaoke applications.
Take your sound with you on the go!!
Thank you, and congratulations on your choice of iDance’s BB10K !
1
WARNING
The exclamation mark inside an
equilateral triangle is intended to
alert user of the presence of
the important operating and
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
maintenance (servicing) instructions
in the literature accompanying
the product.
The lightning flash with
arrowhead symbol inside an
equilateral triangle is intended to
alert User of the presence of
ClassIIequipmentsymbol
Thissymbolindicatesthat
un-insulated “hazardous voltage”
within the product’s enclosure,
which may be of sufficient
magnitude to induce a risk of
electric shock to persons
NOTES : Please do not attempt to open the back cover or power adapter as opening or
removing the covers may expose you to dangerous voltage or other hazards, and it will also
cause the restricted servicing to be disabled: There are no user servicing components
inside.
NOTES : This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus as set out in the Radio Interference Regulations of Industry Canada.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTES : This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction.
2
Loading...