Warnings and Precautions
1
Warnings and Precautions
.
2
Quick Start On Charging Battery
Connecting unit to power outlet
Plug the small end of included AC/DC power adapter into the DC POWER
INPUT on the rear of unit and connect power adapter to an AC power outlet to
power the unit to operate unit and charging the unit built-in battery. Press
theSTANDBYbutton to power on / off.
Use built-in battery for unit main power
1. With the unit AC power connected.
2. At this moment, the battery will auto charging start.
3. After approximately 3-5 hours, the batteries are fully charged.
4. After fully charged battery,remove the power adapter.
5. At this moment, the unit can operate by built-in battery.
Connect y our device to proper USB charging port
3
Quick Start OnFixing Your Device
Using the optional insert / cradle
Your phone's shape will determine if an insert is needed. Take the insert and
place it to the cradle when use flat bottom phones. Round bottom phones do
not need the insert.
Placing the devic e on the unit (two ways of placing: vertical or horizontal):
4
Location of Control
Main Operations
Power on / off
>Slide POWER switch to on / off the unit.
Play/Pause
>When music play, press the PLAY/PAUSE button.
On call / End call
>
When phone calling, press the to
Aux In
>Connect the AUX IN jack for external device sound output
Mobile phone Battery charging
>Connect the USB port for mobile phone battery charging.
On call / End call
button.
5
Using Bluetooth for Music Share
Pairing with Your Mobile Phone
Your unit connected to mobile phones using a procedure by following a few
simple steps, a mobile phone can be paired with the CR13 in a matter of
seconds.
Setup Your Tablet Bluetooth Speaker on BLUETOOTH mode
1. Power on unit by slidethe POWERswitch to on.
2. Remove the Aux cable that the BLUETOOTH indicator flash.
3. Finish this simply setting and go to next step below.
Set your phone to ‘discover’ the your unit
1. First make sure that Bluetooth is act iv ated on your mobile phone.
2. Then set your phone to discover your unit.
3. This usually invo lv es going to a ‘setup,’ ‘c onnect’ or ‘Bl uet ooth’ menu on your
phone and selec ting the option to ‘dis co ver’ or ‘add’ a Bluetooth devic e.
4. Your phone will find the unit under name “CR12E”.
5. Your phone then asks if you want to pair with the unit.
6. Accept by pressing ‘yes’ or ‘ok’ on the phone.
7. Your phone will confirm when pairing is complete.
8. When successful pairing, the BLUETOOTH indicator will light.
Warning! In case of unsuccessful pairing, the BLUETOOTH indicator would
flash continue. You must follow the previous step to setting again.
Playing Audio Via Bluetooth
1. When successful pairing, Press the button to pl ay or pause audio files
from your Bluetooth device.
2. If press the button cannot play and no music listening. You must go to
your mobile phone “Music Centre or Media Player” to manual search
music. Press the PLAY icon of your phone to start playing.
3. After all setting, the music of mobile phone will sound through your unit.
Warning! Mus ic will automatically be paused when you have an incoming call.
When call is ended it will start playing again.
6
Answer the Call and End the Call
After having paired a device when a call is received, a ringtone will sound
through the unit speaker.
1. Press the ANSWER/END CALL button to accept the call or accept the call
with the native control on the c onnected device.
2. The coming call received through the devi ce will now heard through the
speaker.
3. To end the c all, pressANSWER/END CALL button or end the call using
the native controls on the connected device.
Using Aux - In (Au dio in / Line i n)
Using the AUX In ( Line-in / audio In) Jack
You can play your portable audio device with a standard 3.5mm headphone
jack through the unit via the AUX In jack
1. Plug one end of a standard audio patch cord into the headphone or line-out
jack on your device and the other end of the patch cord into the unit's
AUX-in Jack located on the back of the unit.
2. Slide the POWER switch to turn on unit.
3. Turn on and play your personal device;
4. You may need to adjust the volume on your external device as well.
5. To turn off the music, Slide the POWER switch to off position.
7
Loading...