5
MC-5060
progressive music system
Operation instruction:
1. Operation by hand (as Diagram 1)
a. Turn on the power switch on the back of the subwoofer, the system will be in Stand-by
mode and the ST-BY/MUTE LED is lighted, turn the master volume knob to turn on the
system.
b. Press INPUT SEL button to select the audio mode (5.1CH or AUX)
c. Turn the master volume knob to adjust the volume level.
2. Operation by remote control (as Diagram 2)
a. While in Stand-by mode, ST-BY/MUTE LED is lighted, press ST-BY key on the remote con-
trol, system will turn on and ST-BY/MUTE LED will be o .
b. Press INPUT SEL key to change between 5.1CH and AUX mode.
c. Press MODE key to select 5.1CH or 2.1CH output mode.
d. Press Volume +/- key to adjust the volume level. Default level is around 40dB and it can be
adjusted in 0-80dB range. While pressing Volume + key, LED will be ashing until you reach the maximum 80dB. While pressing Volume – key, LED will be ashing until reaching
you reach the 0dB level.
e. Press SUB-WOOF +/- keys to adjust the subwoofer volume level. Adjusting range is +/-
7dB (default 0dB).
f. Press CENTER +/- keys to adjust the subwoofer volume level. Adjusting range is +/-7dB
(default 0dB).
g. Press SURR +/- keys to adjust the subwoofer volume level. Adjusting range is +/-7dB (de-
fault 0dB).
h. Press MUTE key, the sound will be muted, and ST-BY/MUTE LED will be lighted. Press the
MUTE key again to return to normal operation.
i. Press RESET key to reset the adjusted levels of subwoofer, surround and center speaker le-
vels to default (0dB).
Specifi cation:
Channel system 5.1
Output Power (RMS):
Subwoofer: 22W
Satellite: 8W×5
Frequency Response: 35Hz-20KHz
Dimension (W×D×H):
Subwoofer: 340×165×240mm
Satellite: 85×100×165mm
S/N ratio: 80dB