Mode com karma Installation Manual

INSTALLATION MANUAL

82 Jagiellońska Street

03-301 Warsaw

Phone : + 48 22 597 48 48

Fax : [phone]

http://www.modecom.pl

[e-mail]

MODE COM

MODE COM

KARMA

KARMA COMPUTER CASE

WINNER

MODE COM

2

securing

screws

INSTALLATION MANUAL

Congratulations on choosing MODE COM computer case.
You have received the highest quality product which will
satisfy any of your expectations. Should You have any
comments about using our product, please don’t hesitate to
contact us.

Note, the device you have purchased is not a final product
intended to and ready to work as a household or office
appliance. The system builder company will assemble
appropriate devices and components inside a case and
configure the computer before sale. Depending on given
configuration of components installed in a case, appropriate
user manual will be attached.

1.Disassembly of case cover

Remove securing screws then slide the right cover ca.
2,5 cm backwards and raise upwards. Disassemble left cover
in the same way.

MODE COM

3

INSTALLATION MANUAL

2. Installing the fan (option)

Fix the fan in its place using the screws provided. After
installing the Motherboard, connect fan electrical wires to
a socket on the Motherboard, according to its installation
manual.

3. Assembling / Disassembling front panel

Disassemble both sides covers then remove front panel by
pressing & pushing towards (outside of the case) panel
mounting pins.

4. Installing internal devices: FDD, HDD, CD ROM,
FDD 5,25", DVD, CD-RW, DVD-RW

Caution : When installing devices follow their manufacturer’s

instruction attached.

Installing 3,5 ” HDD and FDD drives
A. Insert drive into its place in 2,5 “ or 3,5’’ bay and
position it in the right place.
B. Secure it with the screws provided.

Installing 5,25” CD ROM, DVD or FDD drives

Caution : To remove 5,25’’ blinds, removing front

panel is needed first.

A. Insert drive into its place in 5,25’’ bay and
position it in the right place.
B. Secure it with the screws provided.