Mocka Vibe Puzzle Drawers Assembly Instructions Manual
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
WARNING: Any furniture that is not anchored to a wall has the potential to tip over
in certain circumstances, i.e. if a child attempts to climb up on the furniture or in the
event of an earthquake. Accordingly, we recommend that all furniture is anchored to
a wall. We supply a free safety wall anchor with all furniture sold and we recommend
these are used to prevent your product tipping. The fixing device provided should fit
most wall types, but please note that different wall materials may require different
fixing devices from those supplied.
Phillips & Flathead screwdrivers required
A B
C
D
E
F G
H
Hardware Supplied
dowel
x40
screw
x20
bolt
x64
locking
nut x64
small
screw x9
long
screw x36
long
screw x12
stopper
x9
I
wedge
x6
J
screw
x6
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Vibe Puzzle Drawers
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
Panel Layout
9
8
8
8
7
6
5
4
3
2
1
11
10
11
Vibe Puzzle Drawers
2
mocka.co.nz | mocka.com.au
Assembly Instructions
1
2
Attach 2x stoppers (H) to panel [4] with 2x small screws (F). Insert 8x
bolts (A) and 8x dowels (C) into panel [1]. Insert 2x bolts (A) into panel
[4].
Insert 4x bolts (A) and 4x dowels (C) into panel [3] and repeat with panel
[2].
A
A
A
A
A
A
A
A
C
C
C
C
C
C
C
C
1
3
2
A
C
A
A
C
C
A
C
A
A
4
F
H
F
H
Vibe Puzzle Drawers
3
mocka.co.nz | mocka.com.au
Assembly Instructions
3
4
Attach 2x stoppers (H) to the front side of panel [5] with 2x small screws
(F). Insert 2x dowels (C) into the front side of panel [5]. Now insert 2x
bolts (A) and 2x dowels (C) into the back side of panel [5].
Attach 3x stoppers (H) to the front side of panel [6] with 3x small screws
(F). Insert 4x dowels (C) into the front side of panel [6]. Now insert 4x
bolts (A) and 4x dowels (C) into the back side of panel [6].
6
front
C
C
6
back
A
A
C
C
H
F
H
C
C
C
C
A
A
C
C
5
front
5
back
A
C
A
C
H
F
H
H
Vibe Puzzle Drawers
Assembly Instructions
4
mocka.co.nz | mocka.com.au
Loading...