WARNING: Any furniture that is not anchored to a wall has the potential to tip over in
certain circumstances, i.e. if a child attempts to climb up on the furniture or in the event
of an earthquake. Accordingly, we recommend that all furniture is anchored to a wall.
We supply a free safety wall anchor with all furniture sold and we recommend these
are used to prevent your product tipping. The fixing device provided should fit most
wall types, but please note that different wall materials may require different fixing
devices from those supplied.
Phillips & Flathead screwdrivers required
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
A B1
B2 C1 C2 D
E
F
H I J
K
L
G
M
Hardware Supplied
50mm
screw x8
30mm
screw x12
bolt &
nut x48
12mm
screw x80
18mm
screw x10
wedge
x10
feet
x4
25mm
screw x5
wall
anchor x2
cover
x10
wall
strap x2
14mm
screw x6
dowel
x8
50mm
screw x24
slide
rail x10
N O P
bracket
x10
12mm
screw x10
stopper
x10
E1
E2
E4
E3
Urban Tallboy
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembl
y.
1
2
Attach 4x feet (H) to the ends of the side leg panels as shown. Attach the centre panels to the side leg panels using 12x 30mm screws
(B2). Tighten with a screwdriver.
H
H
H
H
B2
B2
B2
B2
B2
B2
B2
B2
Urban Tallboy
2
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
3
4
Attach panel [2] to the leg panels using 8x 50mm screws (B1). Tighten
with a screwdriver.
Attach 10x brackets (N) to panels [3] and [4] using 40x 12mm screws
(C1) and tighten with a screwdriver. Slide 10x covers (M) over the
brackets as shown.
B1
4
2
B1
B1
B1
B1
B1
B1
B1
C1
C1
N
C1
M
C1
N
3
Urban Tallboy
3
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
5
6
Attach 5x slide rails (E1) to panel [3] using 10x 12mm screws (C1) and
insert 2x bolts (A). Attach 5x slide rails (E3) to panel [4] using 10x
12mm screws (C1) and insert 2x bolts (A). Tighten with a screwdriver.
Attach panel [12] to panels [3] and [4] using 4x locking nuts (A). Tighten
with a screwdriver.
C1
C1
E1
E3
E1
E3E1
E3
E1
E3
E1
E3
4
3
4
3
12
A
A
A
A
A
A
A
Urban Tallboy
Assembly Instructions
4
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Jolt
Wardrobe
A
SSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
7
8
Attach panels [3] and [4] to panel [2] using 4x dowels (F) and secure
with 4x 50mm screws (D). Tighten with a screwdriver.
Slide panel [5] down along the grooves between panels [2] and [3] to
form the back of the unit. Attach metal support bar to panels [3] and [4]
and secure with 4 x screws (J). Tighten with a screwdriver.
F
4
3
2
D
F
D
F
D
F
D
Urban Tallboy
Assembly Instructions
5
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
5
3
4
9
10
Attach panel [1] to panels [3], [4] and [5] using 4x dowels (F) and 4x
locking nuts (A). Attach metal support bar to panel [1] and secure with
3 x screws (I). Tighten with a screwdriver.
Attach 4x bolts (A) to the underside of panel [1].
1
A
A
A
A
A
Urban Tallboy
Assembly Instructions
6
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
1
3
4
11
12
Attach 10x wedges (G) to the back of the unit and secure with 10x
18mm screws (C2). Tighten with a screwdriver.
5
C2
G
G
G
G
G
G
G
G
G
G
G
G
Drawers x6
C1
D
D
E2
A
C1
C1
A
O
P
A
C1
E4
8
7
7
11
8
6
10
9
8
7
6
Attach panels [7], [8], [9] and [10] together using 2x bolts & locking nuts
(A) and 4x 50mm screws (D) as shown. Slide panel [11] between the side
panels. Attach 2x stoppers (P) to panel [6] using 2x 12mm screws (O)
and insert 6x bolts (A). Attach panel [6] to panels [7], [8] and [10] using 6x
locking nuts (A). Attach 1x slide rail (E2) to panel [7] and 1x slide rail (E4)
to panel [8] with 4x 12mm screws (C1). Tighten with a screwdriver.
O
P
A
A
A
A
A
A
A
8
7
9
Urban Tallboy
Assembly Instructions
7
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
13
14
M
K
L
Move the unit into the desired location up against a wall. Attach 2x wall
straps (L) to the back sides of panel [1] and secure with 2x 14mm screws
(J). Fasten to wall using 2x wall anchors (K) and 2x wall screws (I).
Ensure unit is balanced and steady before use. You’re done, enjoy!
J
Safety Straps
J
I
1
Insert each drawer into the unit, ensuring they slide smoothly and easily
along the rails. If the drawer is not catching or sitting flush, twist the end
of the cover (M) until it catches on the stopper (P). To open and close
the drawers properly, please push both ends of the drawer front at the
same time to engage both magnetic covers (M).
Once assembled, lift
furniture into place, do not drag.
6
6
6
6
6
Urban Tallboy
Assembly Instructions
8
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Loading...