Mocka Toy Box Assembly Instructions Manual

Phillips & Flathead screwdrivers required

*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.

Wooden Toy Box

1

mocka.co.nz | mocka.com.au

Assembly Instructions

Thank you for your purchase.
Please follow the instructions below for correct assembly.

1

2

To assemble the Toy Box first insert 4x wood dowels (H) into each front
and back panel [2] and [3].

Fasten side panel [1] to panels [2] and [3] using 4x bolts (A) and 4x nuts
(B). Ensure the grooves on the panels all align. Tighten all bolts with a
screwdriver.

Wooden Toy Box

2

mocka.co.nz | mocka.com.au

Assembly Instructions