Mocka Porto Assembly Instructions Manual

Phillips screwdriver required

A B

C D

Hardware Supplied

50mm

screw x20

wall plug

x2

25mm

screw x2

safety

strap x2

WARNING: Any furniture that is not anchored

to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb
up on the furniture or in the event of an
earthquake. Accordingly, we recommend that
all furniture is anchored to a wall. We supply a
free safety wall anchor with all furniture sold
and we recommend these are used to prevent
your product tipping. The fixing device
provided should fit most wall types, but please
note that different wall materials may require
different fixing devices from those supplied.

Porto Corner Shelves

1

mocka.co.nz | mocka.com.au

Assembly Instructions

Thank you for your purchase.
Please follow the instructions below for correct assembly.

1

2

Attach shelf panels [2], [3] and [4] to the main unit as shown and secure
with 12x 50mm screws (A). Tighten with a screwdriver.

Attach shelf panel [1] into the unit and secure with 4x 50mm screws (A).
Attach top shelf panel [5] with 2x safety straps on the innermost sides as
shown. Secure with 4x 50mm screws (A) and tighten with a screwdriver.
Once assembled lift furniture into place, do not drag.

A

A

A

A

A

A

A

A

A

A

A

A

2

4

3

A

A

A

A

A

A A

A

5

1

D

A

D

A

Porto Corner Shelves

2

mocka.co.nz | mocka.com.au

Assembly Instructions