Mocka Parker Entertainment Unit Assembly Instructions Manual
Parker Entertainment Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A B1
bolt &
nut x38
50mm
screw x8
B2 C D
30mm
screw x12
12mm
screw x16
50mm
screw x10
WARNING: Any furniture that is not anchored to a wall has the potential to tip over
in certain circumstances, i.e. if a child attempts to climb up on the furniture or in the
event of an earthquake. Accordingly, we recommend that all furniture is anchored
to a wall. We supply a free safety wall anchor with all furniture sold and we
recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials
may require different fixing devices from those supplied.
E
E3
E1
slide rail
x4
F
E4
E2
dowel
x24
25mm
screw x2
14mm
screw x2
Hardware Supplied
Phillips & Flathead screwdrivers required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
I JH
wall
plug x2
K
wall
strap x2
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
1
mocka.co.nz | mocka.com.au
Parker Entertainment Unit
Assembly Instructions
1
B1
B1
B1
B1
2
A
B2
B2
A
A
A
A
A
A
2
B2
B2
B2
B2
B2
B2
B2
B2
B2
B2
A
Attach the leg panels as shown using 8x 50mm screws (B1). Tighten
with a screwdriver.
mocka.co.nz | mocka.com.au
Attach panel [2] to the leg panels using 12x 30mm screws (B2). Insert 8x
bolts (A) into panel [2]. Tighten with a screwdriver.
2
Parker Entertainment Unit
Assembly Instructions
3
4
ip
6
E1
A
4
A
C
A
C
E3
E3
A
5
C
C
6
E1
C
C
Insert 2x bolts (A) and attach 1x slide rail [E1] to panel [4] using 2x
12mm screws (C). Insert 2x bolts (A) and attach 1x slide rail [E3] to
panel [5] using 2x 12mm screws (C). Tighten with a screwdriver.
mocka.co.nz | mocka.com.au
Attach 1x slide rail [E3] to one side of panel [6] using 2x 12mm screws
(C). Attach 1x slide rail [E1] to the other side of panel [6] using 2x 12mm
screws (C). Tighten with a screwdriver.
3
Loading...