A B
C D E
F G
H
JI
Hardware Supplied
dowel
x24
screw
x22
bolt
x16
locking
nut x16
small
screw x20
L + R slide
rail x4
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
large
screw x8
nut
x4
long
screw x4
safety
strap x2
L M
N
washer
x2
wall
plug x2
wedge
x4
K
r/washer
screw
x2
O
P
small
screw x4
WARNING: Any furniture that is not anchored to a wall has the potential to
tip over in certain circumstances, i.e. if a child attempts to climb up on the
furniture or in the event of an earthquake. Accordingly, we recommend that
all furniture is anchored to a wall. We supply a free safety wall anchor with
all furniture sold and we recommend these are used to prevent your product
tipping. The fixing device provided should fit most wall types, but please
note that different wall materials may require different fixing devices from
those supplied.
Phillips & Flathead screwdrivers required
Marlow Desk
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
1
2
Attach slide rails (I) and (J) to panels [10] and [11] with 4x small screws
(D). Attach panels [10], [11] and [12] with 4x screws (E). Slide panel [13]
between panels [10] and [11]. Attach panel [14] with 2x bolts (A), 4x
dowels (C) and 2x locking nuts (B). Tighten all with a screwdriver.
Attach 2x slide rails (I) to panels [3] and [5] and secure with 6x small
screws (D). Attach 2x slide rails (J) to panels [4] and [6] and secure with
6x small screws (D). Tighten with a screwdriver.
10
6
5
4
3
13
12
11
14
10
11
10
11
D
D
D
D
E
E
E
E
B
B
A
C
A
C
J
I
D
D
D
D
D
D
D
D
D
D
D
D
I
J
I
J
Drawers x2
Marlow Desk
2
mocka.co.nz | mocka.com.au
Assembly Instructions
3
4
Attach panels [3], [4], [5] and [6] to panel [1] with 8x dowels (C) and 12x
bolts. Secure with 12x locking nuts (B) and tighten with a screwdriver.
Slide panel [7] along the grooves between the rear of the panels to create
the back of the unit. Attach panel [2] to the rest of the unit using 8x dowels
(C). Secure with 12x screws (E) and tighten with a screwdriver.
6
5
4
3
2
1
7
6
5
4
3
B
B
B
B
B
B
B
B
B
B
B
A
A
A
A
A
A
A
A
A
A
A
A
C
C
C
C
C
C
C
C
E
E
E
E
E
E
E
E
B
E
E
E
E
C
C
C
C
C
C
C
C
Marlow Desk
3
mocka.co.nz | mocka.com.au
Assembly Instructions
5
6
Attach leg panels [8] and [9] together with 4x long screws (G) and 4x
nuts (H). Tighten with a screwdriver.
Attach the assembled leg panels to the underside of the desk [2] with 8x
large screws (F). Tighten with a screwdriver.
9
8
2
9
8
G
H
G
G
G
H
H
H
F
F
F
F
F
F
F
F
H
Marlow Desk
Assembly Instructions
4
mocka.co.nz | mocka.com.au
Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
7
8
Insert the completed drawers into the main unit as shown, ensuring
they slide easily along the rails.
Attach 4x wedges (O) to the corners of the back panel [5] as shown, and
secure with 4x small screws (P). Tighten with a screwdriver.
7
1
14
O
O
P
O
14
Marlow Desk
Assembly Instructions
5
mocka.co.nz | mocka.com.au
9
10
Once assembled lift furniture into place against a wall, do not drag. Secure
the bottom of the 2x straps (M) to the cabinet with 2x r/washer screws (K).
Attach the top end of the straps (M) to the wall using 2x wall plugs (L), 2x
washers (N) and 2x screws (E). Tighten with a screwdriver.
You’re done, enjoy!
E
L
M
N
K
E
L
M
N
K
Wall Mount
Marlow Desk
Assembly Instructions
6
mocka.co.nz | mocka.com.au
Loading...