A B
C D E F
Hardware Supplied
dowel
x24
screw
x4
bolt
x24
locking
nut x24
nail
x28
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
wall
bracket x2
WARNING: Any furniture that is not
anchored to a wall has the potential
to tip over in certain circumstances,
i.e. if a child attempts to climb up on
the furniture or in the event of an
earthquake. We recommend that all
furniture is anchored to a wall. We
supply a free safety wall anchor with
all furniture sold and we recommend
these are used to prevent your
product tipping. The fixing device
provided should fit most wall types,
but please note that different wall
materials may require different fixing
devices from those supplied.
Phillips & Flathead screwdriver and hammer required
Luna Cube 8
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
1
2
Slot 3x panels [3] into the grooves of panel [4] as shown. Insert 6x bolts (A) and 6x dowels (C) into panel [5]. Attach to the rest of
the unit with 6x locking nuts (B) and tighten with a screwdriver.
3
3
3
5
A
A
A
A
C
C
C
B
B
B
C
4
Luna Cube 8
2
mocka.co.nz | mocka.com.au
Assembly Instructions
3
4
Insert 6x bolts (A) and 6x dowels (C) into panel [5]. Attach to the rest of
the unit with 6x locking nuts (B) and tighten with a screwdriver. Now
insert 12x dowels (C) into the ends of the panels.
Insert 12x bolts (A) into panels [1] and [2].
1
2
A
A
A
A
A
A
A
A
A
A
A
A
5
C
C
C
C
C
C
C
C
C
C
B
B
B
B
A
A
A
A
Luna Cube 8
3
mocka.co.nz | mocka.com.au
Assembly Instructions
5
6
Attach panel [2] to the main unit with 6x locking nuts (B) and tighten
with a screwdriver.
Attach panel [1] to the main unit with 6x locking nuts (B) and tighten with
a screwdriver.
2
5
B
B
B
B
1
B
B
B
B
B
B
Luna Cube 8
Assembly Instructions
4
mocka.co.nz | mocka.com.au
Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
7
8
Once assembled lift furniture into place, do not drag. To attach the wall
brackets, attach 2x wall brackets (F) to the back of the unit and secure
with 4x screws (D). Tighten with a screwdriver.
To attach the optional backboards, attach 2x panels [6] to the back of the
unit and secure with 28x nails using a hammer. You’re done, enjoy!
D
D
D
D
F
F
E
6
6
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
Wall
Brackets
Backboards
Luna Cube 8
Assembly Instructions
5
mocka.co.nz | mocka.com.au
Loading...