Mocka Kids Steel Wagon Assembly Instructions Manual
Kids Steel Wagon
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
8 mm
short screw
x8
F G
round ball
x1
B
nut
x11
medium
screw
x2
C
35 mm
washer
long screw
x1
H
35 mm
circular swivel
x1
Hardware Supplied
D
x4
I
spanner
x1
E
Suitable for ages 12 months +
end cap
x4
J
support
brace
x2
Phillips screwdriver
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
For added safety make regular checks to ensure all
screws and nuts are tight and secure.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Warning: Small parts are used to assemble the Kids Steel Wagon
and should only be assembled by an adult. Keep all assembly parts away
from small children.
1
Kids Steel Wagon
Assembly Instructions
1
C
2
B
F
x1
B
B
A
x3
B
First connect the long handle with round black ball (F). Connect
this to the front axle by threading long screw (C) through the holes in
the axle and round ball, and fastening with nut (B). Tighten nut with
spanner (I).
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
A
A
Using 3 x small screws (A) and nuts (B), attach circular swivel through
the corresponding holes to the axle frame. Hold screws in place with
screwdriver and tighten nuts (B) with spanner (I).
2
Loading...