Mocka Kids House Bookcase Assembly Instructions Manual
Kids House Bookcase
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
bolt
x16
E
small
screw x6
B
locking
nut x16
F
nut
x10
C
dowel
x26
H
medium
screw x45
D
long bolt
x4
I
cover
x20
W
safety
strap
x3
X
wall
anchor
x3
WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
long
screw
x3
Y
screw
x3
Z
washer
x3
Phillips & Flathead screwdrivers
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
1
Kids House Bookcase
Assembly Instructions
1
2
Insert 12 x bolts (A) into panels [5] and [6]. Tighten with a screwdriver.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Insert 16x dowels (C) into panels [7], [8] and [11]. Attach panel [8] to
panel [6] and secure with 2x nuts (F) and 2x long bolts (D). Attach
panels [7] and [11] to panel [6] and secure with 6x locking nuts (B).
Tighten with a screw driver. Cover long bolts (D) with 2x covers (I)
2
Kids House Bookcase
Assembly Instructions
3
4
Attach panels [7], [8] and [11] to panel [5] and secure with 6 x locking
nuts (B). Insert 2 x nuts (F) into panel [8] and secure panel [8] to panel
[5] with 2 x long bolts (D). Tighten with a screwdriver. Cover long bolts
(D) with 2 x covers (I).
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Insert 4 x dowels (C) and 4 x nuts (F) into panels [5] and [6]. Attach
panel [4] to panels [5], [6] and [11] and secure with 4 x long bolts (D)
and 2 x small screws (E). Tighten with a screwdriver. Cover nuts (F)
with 4 x covers (I).
3
Loading...