Jesse Buffet
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
Hardware Supplied
dowel
x26
bolt
x41
screw
x12
locking nut
x41
small screw
x30
cam bolt
x4
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
A B
C
D E
N
M
L
KJ
IHG
F
cam nut
x4
wedge
x12
screw
x12
long screw
x10
Wall Strap
x4
washer
Z
Y
wall
anchor
x2
X
safety
strap x2
WV
screw
x2
wall
screw
x2
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
CL runner tracks
x3
CR runner tracksx3DL runnersx3DR runners
x3
shelf plug
x8
O
hinge
x4
P
small screw
x24
Q
plastic
glide x5
R
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
and hammer required
Jesse Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
1
2
E
E
E
E
G
E
E
E
E
G
G
E
E
E
G
E
E
F
F
E
E
E
F
E
E
E
F
E
5
6
CR
CL
23
Attach 3xCL runner tracks (F) to panel [5] using 9x small screws (E).
Attach 3xCR runner tracks (G) to panel [6] using 9x small screws (E).
Insert 4x bolts (C) to the panels [5] and [6]. Tighten with a screwdriver.
Attach 4x hinges (P) to door panels [22] and [23], securing with 8x
screws (Q). Tighten with a screwdriver.
P
Q
P
Q
P
Q
P
Q
22
Q
P
C
C
C
C
Jesse Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3
4
6
7
7
D
D
D
D
5
Attach panels [5] and [6] to panels [7] with 4x dowels (A) ,and
secure with 4x locking nuts (D). Tighten with a screwdriver.
Insert 2x bolts (C) to the panels [2] and [3]. Tighten with a screwdriver.
3
C
2
C
D
A
A
A
A
Jesse Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
5
6
C
C
1
C
C
D
3
2
Insert 9x bolts (C) and 10x dowels (A) to the panels [1].
Tighten with a screwdriver.
Attach panels [2] and [3] to panel [8] and secure with 2x locking nuts
(D) and tighten with a screwdriver.
C
C
C
C
8
A
A
A
A
A
A
A
A
D
C
A
A
Jesse Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
7
8
Attach top panel [1] to the rest of the unit and secure with
9x locking nuts (D) and tighten with a screwdriver.
Slide panels [9] and [10] between the grooves of panels [1], [2] ,[3], [5]
and [6] to form the back of the unit, as shown.
2
3
2
3
1
6
5
9
10
10
6
5
1
D
D
D
D
D
D
8
Jesse Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
9
10
Attach panel [20] to panel [4] with 2x long screws (J) and
tighten with a screwdriver.
Attach bottom panel [4] to the rest of the unit with 8x dowels (A) and
secure with 8x long screws (J) and tighten with a screwdriver.
J
J
J
J
5
2
3
4
6
A
A
A
A
A
J
J
J
J
20
J
J
4
Jesse Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
11
12
4
C
A
11
12
13
C
A
D
D
Insert 10x bolts (C) into panel [4]. Tighten with a screwdriver.
Insert 2x dowels (A) and 2x bolts (C) into panels [12] and [13].Attach
panel [11] , [12] and [13] using 2x locking nuts (D). Tighten with a
screwdriver.
C
C
C
C
C
C
C
C
D
20
C
C
x2
Jesse Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
13
14
Attach panels [12] and [13] to panels [14] using 4x cam bolt (K) and
secure with 4x cam nuts (L). Tighten with a screwdriver.
Attach leg panels to bottom panel [4] with 10x locking nuts (D). Tighten
with a screwdriver. Attach 5x plastic glides (R) into the panels with a
hammer as shown.
K
K
K
K
K
L
L
L
L
L
D
D
D
D
D
4
13
13
12
12
14
14
14
14
11
11
D
D
R
R
R
R
R
R
Jesse Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
15
16
C
C
C
C
15
D
D
D
D
15
16
17
Insert 4x bolts (C) into panel [15]. Tighten with a screwdriver.
Attach panels [16] and [17] to panel [15] and secure with 4x locking
nuts (D). Tighten with a screwdriver.
Drawers x3 Drawers x3
D
Jesse Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
17
18
15
18
16
17
B
B
B
B
16
17
19
Slide panel [18] along the grooves between the side panels [16] and
[17] to form the base of the drawer.
Attach panels [16], [17] and [19] with 4x screws (B). Tighten with
a screwdriver.
Drawers x3 Drawers x3
Jesse Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
11
19
20
Attach slide rails (I) and (H) to panels [17] and [16] with 4x small
screws (E). Tighten with a screwdriver. Complete the other two
drawers.
Secure door panels [22] and [23] to the main unit by attaching the
other end of the 4x hinges (P) with 16x screws (Q) as shown.
Tighten with a screwdriver.
Q
Q
P
P
22
23
3
2
16
17
H
I
E
E
E
E
Drawers x3
NOTE: If the doors are uneven or
there is a gap in the middle, loosen
or tighten the screw on the door
hinge until they are sitting flush.
Jesse Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
12
21
22
Insert 8x shelf plugs (O) into panels [2], [5], [6] and [3] as shown.
Insert the shelf panels [21] and balance on top of the plugs.
Insert the completed drawer into the main unit as shown, ensuring
they slide easily along the rails.
O
O
21
21
2
3
5
6
Jesse Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
13
23
24
V
Z
W
M
N
Attach 2x safety strap (V) to the top of the back side of the unit
as shown using 2x washer (Z) and 2x screw (W). Tighten with a
screwdriver.
M
N
M
N
M
N
Attach 12x wedges (M) to the corners of the back panels [9] and
[10] as shown, and secure with 12x small screws (N). Tighten
with a screwdriver.
V
Z
W
9
10
10
1
V
Z
W
Jesse Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
13
25
X
Y
Z
Once assembled lift furniture into place, do not drag. Use a drill to create
a small hole lining up with the top of the safety strap (V). Fasten to the wall
using 2x washer (Z), 2x wall plug (X) and 2x screw (Y). Ensure unit is
balanced and steady before use. You’re done, enjoy!
X
Y
Z
X
Y
Z
Loading...