Page 1
A B
C D E
F
G
H
JI
Phillips & Flathead screwdrivers
and hammer required
Hardware Supplied
small
dowel x22
bolt
x14
locking
nut x14
small
screw x32
long
screw x9
plastic
glide x4
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
nut
x4
hinge
x8
WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
long
dowel x2
bolt
x4
washer
x2
V
W
X Y
screw
x1
screw
x1
wall
anchor x1
safety
strap x1
Z
Wall Strap
K
L
wedge
x4
screw
x4
M
N
dowel
x4
allen
key x1
Chelsea Cabinet
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
Page 2
1
2
Attach panel [4] to panel [5] using 2x bolts (C) and secure with 2x
locking nuts (D). Tighten with a screwdriver.
Attach panel [6] to panel [4] using 2x long dowels (B) and 2x long screws
(I). Attach 2x bolts (C) to panel [4]. Tighten with a screwdriver.
6
5
4
C
D
C
D
4
D
C
C
B
B
I
I
Chelsea Cabinet
2
mocka.co.nz | mocka.com.au
Assembly Instructions
Page 3
3
4
Attach panel [7] to panel [4] and secure with 2x locking nuts (D).
Tighten with a screwdriver.
Insert 4x dowels (A) and 2x bolts (C) into panel [2]. Insert 4x dowels (A)
and 2x bolts (C) into panel [3].
7
4
3
2
D
A
C
C
A
A
A
C
C
A
A
D
D
Chelsea Cabinet
3
mocka.co.nz | mocka.com.au
Assembly Instructions
Page 4
5
6
Attach panels [2] and [3] to panel [4] using 4x locking nuts (D). Tighten
with a screwdriver.
Insert 6x bolts (C) into panel [1].
4
1
3
2
D
D
D
D
C
C
C
C
C
C
Chelsea Cabinet
Assembly Instructions
4
mocka.co.nz | mocka.com.au
Page 5
Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
7
8
Connect panels [9] together using the connector [10] as shown.
10
9
1
Attach panel [1] to panels [2] and [3] using 6x small dowels (A) and
secure with 6x locking nuts (D). Tighten with a screwdriver.
A
A
A
D
D
3
2
9
Chelsea Cabinet
Assembly Instructions
5
mocka.co.nz | mocka.com.au
Page 6
9
10
Slide panels [9] down between the grooves of panels [2] and [3] to form
the back of the unit.
8
3
2
11
9
9
M
M
G
11
H
M
11
Attach two leg panels [11] to the underside of panel [8] as shown, using
2x dowels (M) and 2x bolts (G). Tighten with the allen key (N). Secure
with 2x nuts (H) and tighten them with a flathead screwdriver.
×
N
Chelsea Cabinet
Assembly Instructions
6
mocka.co.nz | mocka.com.au
Page 7
11
12
8
12
11
A
A
I
J
J
J
J
M
M
G
11
Attach the remaining two leg panels [11] to panel [8] using 2x dowels (M) and 2x
bolts (G), tightening with the allen key (N). Secure with 2x nuts (H). Attach 4x
plastic glides (J) to the end of each leg using a hammer. Now attach panel [12]
using 2x dowels (A) and secure with 1x long screw (I). Tighten with a screwdriver.
H
M
11
I
I
I
I
A
A
A
A
I
I
8
3
2
Attach panel [8] to panels [2] and [3] using 6x small dowels (A) and
secure with 6x screws (I). Tighten with a screwdriver.
N
Chelsea Cabinet
Assembly Instructions
7
mocka.co.nz | mocka.com.au
Page 8
13
14
Attach door panels [13] and [14] to the main unit as shown, using 2x
small screws (F) to secure each hinge (E). Tighten with a screwdriver.
13
14
13
14
F
F
Attach 2x hinges (E) to panel [13] as shown and secure with 4x small
screws (F). Attach 2x hinges (E) to panel [14] and secure with 4x small
screws (F). Tighten with a screwdriver. Repeat this step to assemble the
remaining two doors.
13
F
F
F
F
E
E
14
F
F
F
F
E
E
Doors x4
NOTE: If the doors
are uneven or
there is a gap in
the middle, loosen
or tighten the
screw on the door
hinge until they are
sitting flush.
F
F
Chelsea Cabinet
Assembly Instructions
8
mocka.co.nz | mocka.com.au
Page 9
15
16
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the safety strap (V). Fasten
to wall using 1x wall plug (X), 1x washer (Z) and 1x screw (Y). Ensure
unit is balanced and steady before use. You’re done, enjoy!
9
1
X
Y
Z
wall
plug
screw
strap
washer
Wall Strap
Attach 4x wedges (K) to the corners of the panel [9] and secure with 4x
screws (L). Attach 1x safety strap (V) to the back edge of panel [1] using
1x washer (Z) and 1x screw (W). Tighten with a screwdriver.
1
V
W
Z
screw
strap
washer
K
L
K
L
K
L
9
Chelsea Cabinet
Assembly Instructions
9
mocka.co.nz | mocka.com.au
Loading...