Mobotix Mx-S26A-6N016, Mx-S26A-6D016 User Manual
Accessories
S26
AudioMount with integrated microphone and
speaker
(can, e.g., be used as an intercom solution)
Quick Install
S26 Flex
Hemispheric 6MP Camera with Day
or Night Image Sensor for Concealed
Installation
• Mx6 system platform with H.264 support
• Includes MxAnalytics video analysis tools out-of-the-box
• Recording on internal MicroSD card (SDXC, SDHC installed)
• Audio connectors for microphone and speaker integrated
• Sensor for temperature integrated
• Weatherproof and robust camera housing (IP66, IK07)
S26 Standard Delivery
M.10
M.9
M.8
M.7
M.6
M.5
M.4
M.3
M.2
M.1
1.13
Item Count Part Name
1.1 1 Camera housing (with base plate)
1.2 1 Lens B016 (installed)
1.1
1.2
1.8
1.10
1.11
1.12
Standard Delivery
1.6
1.3
1.9
1.5
1.7
MOBOTIX 6MP camera for concealed installation in indoor
and outdoor applications, available as S26 Flex with lens
B016 and Day or Night image sensor.
More information:
www.mobotix.com > Products > Outdoor Cameras > Flex S26
Mx-S26
32.839-002_EN_09/2017
Standard Delivery
Item Count Part Name
1.3 1 Dome (installed)
1.4 1 Housing cover for S26 (installed)
1.5 3 Stainless steel Allen screw with at head M4x8 mm (installed)
1.6 1 Sealing ring (installed)
1.7 1 Sealing plug blue, small (sensor modules, USB, mounted)
1.8 1 Sealing plug blue, large (Ethernet patch cable, mounted)
1.4
1.9 1 Cable lock with bayonet catch (Ethernet patch cable, mounted)
1.10 1 Eight-wire plug, white (Ethernet installation cable, microphone,
speaker)
1.11 1 MicroSD card pre-installed (SDXC)
1.12 1 Threaded plug for SD card, blue (mounted)
1.13 1 Ethernet patch cable, 50 cm/19.7 in with sealing
Mounting Supplies
Item Count Part Name
M.1 4 Stainless steel washers dia. 4.3 mm
M.2 4 Dowels 6 mm
M.3 4 Stainless steel wood screws with hex head 4x40 mm
M.4 2 Cable plug 5 to 7 mm, white (Ethernet installation cable)
M.5 1 Cable plug 3 to 5 mm, white (Ethernet installation cable)
M.6 1 Allen wrench 2.5 mm
M.7 1 Lens wrench (lens, dome)
M.8 1 Module wrench (sensor module, glass cover/lter insert)
M.9 1 Cable tie (Ethernet installation cable, microphone, speaker)
M.10 1 Screwdriver (terminals)
Mounting the Camera
1. Installation Using the Base Plate
Attach the camera using the supplied or other screws by aixing the base
plate to a suitable material 1 (see
«Drilling Template» on page 2
).
Note that you can also install the S26 behind faceplates of up to 6.4 mm/0.25 in
thickness using stud bolts 2 (see
«Drilling Template» on page 2
).
2. Installation With AudioMount (Accessory)
Using the self-adhesive AudioMount 3, you can install the S26 as an
intercom solution. This is explained in the product documentation
Install AudioMount»
(suitable drilling template is supplied).
«Quick
Notes:
• Due to the missing MxBus connection, this camera model cannot be installed as a fully-edged door station with connected MxBus modules and
corresponding remote stations.
• For the realization of an intercom solution, switching inputs and outputs can be used via a USB-connected MX-232-IO-Box. In this case, the processing of the switching input signals (e. g., from a bell) and the switching outputs (e. g., for a door release) is carried out internally via the available
standard mechanisms (e. g., events and network messages). Autoconguration and other door station functions are not available.
1
2
3
Connections and Initial Operation of the S26
You can nd detailed information on the installation and connections of the S26 in the
www.mobotix.com > Support > Manuals).
Please note that the boot options of this camera have changed compared to its predecessor (see
one key ("L"). Regarding the rest of the initial operation of the S26, please see the
LEDs
S15 Camera Manual
S15 Camera Manual
for the
«Boot Options of the S26»
in
Chapter 3, «Initial Operation»
S15M
(PDF, available on
) and the camera only has
.
L
Key L
Housing cover
Lens
B016
Ethernet patch cable
USB
Base plate
Ethernet installation cable,
LSA terminal block
In special situations, you can attach an external sensor module to the S26. In this case, you need to attach the external sensor module to the "Cam1"
connector of the camera; then follow the instructions for attaching sensor modules to the S16. Aer conguring the external sensor module, the integrated image sensor of the S26 will be deactivated.
Microphone
Speaker
MOBOTIX patch cable or
additional cable
Additional cable or net-
work installation cable
MiniUSB
Cam1
Inserting/Exchanging the SD Card
All camera models can use the integrated MicroSD card (SDHC) to record video data. In order to exchange the MicroSD
card, please proceed as outlined in the following instruction. For information on reliable SD cards, please see the MOBOTIX
website www.mobotix.com > Support > MxMedia Library > Planning in the document
MOBOTIX Cameras
.
When replacing the SD card, make sure that recording has been deactivated in the browser (
Storage on External File Server / Flash Device
1. Remove the SD card
Loosen the threaded plug at the top of the
housing (using a suitable coin, for example)
and remove the plug. Using tweezers, gently
press the SD card into the slot (as indicated by
the arrow) until you hear a
click
. The card is
protruding slightly and can be easily removed
; activate recording again in the same dialog).
2. Insert the SD card
Again using tweezers, insert the SD card as
Click!
shown (contacts facing forward) into the card
slot. Make sure that you hear a
pushing the card into the slot. The card is now
locked and can be used. Insert the threaded
plug again and tighten it using the coin.
MicroSD Card Whitelist for
Admin Menu > Storage >
click
again when
with the tweezers.
Boot Options of the S26
By default, the camera starts as DHCP client and automatically tries to get
an IP address from a DHCP server. To start the camera in a mode dierent
from the default mode, you can activate the boot menu of the camera.
1. Preparing the Camera
• Disconnect the camera's power supply.
• Reconnect the power supply of the camera.
2. Activating the Boot Menu
The red LED lights up 5 to 10 seconds aer establishing
the power supply and will stay on for 10 seconds. Briey
L
press the key L indicated by the red circle in the gure.
The camera enters the boot menu, ready for selecting
one of the boot options.
The LED now ashes once and repeats the ash signal
aer pausing for one second (the number of ashes indicates the current
boot option). To go to the next boot option, briey press the key again
(< 1 sec). Aer the last boot option, the camera returns to the rst option
(LED ashes once).
LED
ashes
1 x Not used Not available on this camera model. —
2 x
3 x
4 x
*Only on cameras with audio option and installed speaker.
Boot
Option
Factory
Defaults
Automatic
IP Address
Recovery
System
Meaning
Starts the camera with factory defaults
(factory default IP address, users and
passwords will not be reset).
Starts the camera as DHCP client and
tries to obtain an IP address from a
DHCP server. If a DHCP server cannot
be found or no IP address can be
obtained, the camera starts with its
factory default address.
Starts the camera with the recovery
system, e.g., in order to recover from a
failed update of the camera soware.
3. Selecting a Boot Option
Press the key longer (> 2 sec) into the hole. The camera conrms the selection by ashing rapidly three times. Aer 20 sec, the camera will conrm
the selection by playing a sound according to the table above.
If nothing is selected, the camera will resume its normal boot process
aer a certain time.
Click!
Audio
Conrmation*
Boing
Boing Boing
Alarm Sound
130 mm/5.12 in
ø 33.6 mm/1.32 in
Important Notes
Safety Warnings
Notes on Installing:
• This product must not be used in locations exposed to
the dangers of explosion.
• Make sure that you install this product as outlined in
Chapter 2, «Installation»
A faulty installation can damage the camera!
•
When installing this product, make sure that you are only
using genuine MOBOTIX parts and MOBOTIX connection
cables.
•
Only install this product on suitable, solid materials that
provide for a sturdy installation of the xing elements
used.
Electrical installation: Electrical systems and equipment may
only be installed, modied and maintained by a qualied
electrician or under the direction and supervision of a qualied
electrician in accordance with the applicable electrical guidelines. Make sure to properly set up all electrical connections.
Electrical surges: MOBOTIX cameras are protected against
the eects of small electrical surges by numerous measures.
These measures, however, cannot prevent the camera from
being damaged when stronger electrical surges occur. Special
care should be taken when installing the camera outside of
buildings to ensure proper protection against lightning, since
this also protects the building and the whole network infrastructure.
Never touch the lens: Due to the high performance of the
S26, the area of the image sensor can get quite hot, especially
when the ambient temperature is also high. This does not
aect the proper functioning of the camera in any way. For
this reason, the product must not be installed within the reach
of persons without dome.
Power o before opening the camera: Make sure the power
supply to the camera is disconnected before opening the camera
housing (e.g., when exchanging the SD card or when opening
the body to attach wires).
of the corresponding manual.
Network security: MOBOTIX products include all of the necessary conguration options for operation in Ethernet networks in compliance with data protection laws. The operator
is responsible for the data protection concept across the entire
system. The basic settings required to prevent misuse can be
congured in the soware and are password-protected. This
prevents unauthorized parties from accessing these settings.
Legal Notes
Legal aspects of video and sound recording: You must comply
with all data protection regulations for video and sound monitoring when using MOBOTIX products. Depending on national
laws and the installation location of the S26, the recording of
video and sound data may be subject to special documentation
or it may be prohibited. All users of MOBOTIX products are
therefore required to familiarize themselves with all applicable
regulations and to comply with these laws. MOBOTIX AG is not
liable for any illegal use of its products.
Disposal
Electrical and electronic products contain many valuable
materials. For this reason, we recommend that you dispose
of MOBOTIX products at the end of their service life in accordance with all legal requirements and regulations (or deposit
these products at a municipal collection center). MOBOTIX
products must not be disposed of in household waste! If the
product contains a battery, please dispose of the battery sep-
arately (the corresponding product manuals contain specic
directions if the product contains a battery).
Disclaimer
MOBOTIX AG does not assume any responsibility for damages,
which are the result of improper use or failure to comply to the
manuals or the applicable rules and regulations. Our General
Terms and Conditions apply. You can download the current
version of the General Terms and Conditions from our website at www.mobotix.com by clicking on the COS link at the
bottom of every page.
§
§
Technical Specications S26
Model Variants
Lens Option B016 (focal length 1.6 mm, f/2.0, image angle 180°x180°)
Sensitivity • Color sensor (daylight): 0,1 lx @ 1/60s; 0,005 lx @ 1s
Image Sensor 1/1.8“ CMOS, 6MP (3072x2048), Progressive Scan
Max. Image Size 6MP (3072x2048)
Image Formats Freely congurable 4:3, 8:3, 16:9 or custom formats (image
Max. Frame Rate • MxPEG: 42@HD(1280x720), 34@Full-HD, 24@QXGA, 15@5Mp,
Video Codec • MxPEG, M-JPEG, JPEG (max. output size 6MP)
DVR • In the camera on MicroSD card (SDXC, SDHC pre-installed)
Soware MxManagementCenter
Image Processing
PTZ Digital pan/tilt/zoom, continuous up to 8X
Mx-S26A-6D016 (daylight image sensor, color)
Mx-S26A-6N016 (night image sensor,
• Black&White sensor (night): 0,02 lx @ 1/60s; 0,001 lx @ 1s
cropping), e.g., 2592x1944 (5MP), 2048x1536 (QXGA), 1920x1080
(Full-HD), 1280x960 (MEGA)
12@6MP
• M-JPEG: 26@HD(1280x720), 13@Full-HD, 9@QXGA, 5@5Mp,
4@6MP
• H.264: 25@Full-HD, 20@QXGA
• H.264 (max. output size QXGA, bandwidth limitation applicable)
• External, on USB device
• External, on NAS
• Separate live image and full image recording – MxFFS with
archiving function
• Pre- and post-alarm images
• Automatic DVR monitoring with error notication
MxLEO, backlight compensation, automatic white balance, distortion correction
Black&White
)
Alarm/Events Temperature sensor, shock detector (with rmware version 5.0.1
Intelligent Video
Analysis
Audio • Ext. microphone/ext. speaker can be attached
Interfaces
Security User/group management, HTTPS/SSL, IP address lter, IEEE 802.1x,
Certications EN55022:2010; EN55024:2010; EN50121-4:2006, EN61000-6-1:2007;
Power Supply Power over Ethernet IEEE 802.3af
Power Consumption Typ. 3.3 W
Protection Classes IP66
Ambient Temperature –30 to 60 °C/–22 to 140 °F
Dimensions/Weight
Standard Delivery
and higher), additional sensors/IOs via MxMessageSystem, notication via e-mail, FTP, IP telephony (VoIP, SIP), visual/sound alarms,
pre- and post-alarm images
MxActivitySensor, video motion analysis, MxAnalytics
• Lip-synchronous audio, audio recording
• VoIP/SIP telephony, intercom, remote controlling using key codes
Ethernet 100BaseT (MxRJ45), MiniUSB (MxMiniUSB), inputs/outputs
and RS232 via accessories
intrusion detection, digital image signature, MxFFS
EN 61000-6-2:2005, EN61000-6-3:2007+A1:2011, EN61000-64:2007+A1:2011, AS/ NZS CISPR22:2009+A1:2010, CFR47 FCC
part15B
IK07
Width x height x depth: 115 x 130 x 48 mm/4.53 x 5.12 x 1.89 in; weight:
approx. 457 g
Housing (high-resistance composite, PBT) white and base plate
aluminum blue anodized, shock-resistant dome for lens B016,
mounting supplies, mounting wrenches, 50 cm/20 in patch cable,
soware, MicroSD card (SDXC, SDHC installed)
Dimensions
48 mm/1.89 in
115 mm/4.53 in
100 mm/3.94 in
100 mm/3.94 in
110 mm/4.33 in
8.50 mm/0.33 in
13.50 mm/0.53 in
M6
130 mm/5.12 in
47.50 mm/1.87 in
Ø 5.50 mm/0.22 in
39.50 mm/1.56 in
33.50 mm/1.32 in
5 mm/
0.20 in
Drilling Template
115 mm/4.53 in
100 mm/3.94 in
110 mm/4.33 in
0.33 in
100 mm/3.94 in
8.5 mm/
Manuals and drilling templates:
www.mobotix.com > Support > Manuals > IP Camera Systems > Flex S26
MOBOTIX, the MX logo, MxControlCenter, MxEasy, MxPEG and MxActivitySensor are trademarks of
MOBOTIX AG registered in the European Union, the U.S.A., and other countries • Information subject to
change without notice • MOBOTIX does not assume any liability for technical or editorial errors or omissions
contained herein • All rights reserved • © MOBOTIX AG 2017
Declaration of Conformity: www.mobotix.com > Support > MxMedia Library > Certicates
100 mm/3.94 in
MOBOTIX AG
Kaiserstrasse
D-67722 Langmeil
Tel.: +49 6302 9816-103
Fax: +49 6302 9816-190
sales@mobotix.com
www.mobotix.com
Loading...