Mobotix MX-Q24Mi-Basic-D22, MX-Q24Mi-Basic-D11, MX-Q24M-Sec-D22 User Manual

EN
High-resolution 180° Panorama
High-resolution 180° Panorama
Q24M: Camera Manual
Allround Easy. Allround Secure.
The HiRes Video Company
www.mobotix.com > Support > Manuals
HiRes Video Innovations
The German company MOBOTIX AG is known as the leading pioneer in network camera technology and its
decentralized concept has made high-resolution video systems cost efficient.
MOBOTIX AG • D-67722 Langmeil • Tel: +49-6302-9816-103 • Fax: +49-6302-9816-190 • sales@mobotix.com
www.mobotix.com
2/1�61�6
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
High-resolution 180° Panorama
Q24M Camera Manual: Camera Data
MOBOTIX Camera Data
Enter your camera data here.
Camera model:
Camera name:
Factory IP address:
Current IP address:
DHCP:
Admin user name:
Admin password:
Original Q24M image; Wall mounted at a height of 2.3 m in a bank
Note
MOBOTIX offers inexpensive seminars which include workshops and practical exercises: Basic Seminar three days, Advanced Seminar two days.
For more information, please visit www.mobotix.com
3/1�61�6
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Contents
Foreword 6
The MOBOTIX Concept 8
Innovative Hemispheric Technology 10
MOBOTIX Hemispheric Technology 12
Superior Storage Solution 14
Added Security Value 16
Cost Benets And Technical Advantages 18
1 INTRODUCTION 20
1.1 Q24M Overview 20
1.2 Q24M: Next Generation Hemispheric Technology 29
1.3 General MOBOTIX Camera Functions 30
1.4 Lens Options, Hardware And Software Features 36
2 INSTALLATION 40
2.1 Preparing The Installation 40
2.1.1 Wall-Mounted 41
2.1.2 Ceiling-Mounted 44
2.1.3 Mounting Options 47
2.1.4 Network Connection And Power Supply, UPS 48
2.1.5 Preparing The Camera Connections, Wall Outlets 49
2.1.6 Wiring, Fire Prevention, Lightning And Surge Protection 50
2.2 Q24M Basic/Secure: Delivered Parts, Components, Dimensions 2
2.2.1 Delivered Parts And Camera Components 52
2.2.2 Camera Housing And Connectors 53
2.2.3 Q24M: Dimensions Without Mounting Options 54
2.3 Available Q24M Accessories - Overview �6
2.4 Mounting The Camera Without Accessories 60
2.4.1 Mounting Instructions 60
2.4.2 Required Tools 61
2.4.3 Procedure 62
2.� Mounting The Camera With The On-Wall Set 66
2.5.1 Mounting Instructions 66
2.5.2 On-Wall Set 67
2.5.3 Procedure 70
4/1�61�6
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Q24M Camera Manual: Contents
2.6 Mounting The Camera With The In-Ceiling Set 72
2.6.1 Mounting Instructions 72
2.6.2 In-Ceiling Set 73
2.6.3 Procedure 76
2.7 Installing The Vandalism Set 78
2.7.1 Mounting Instructions 78
2.7.2 Vandalism Set 79
2.7.3 Procedure 82
2.8 Installing The Wall Mount 84
2.8.1 Mounting Instructions 84
2.8.2 Wall Mount 85
2.8.3 Procedure 88
2.9 Installing The Corner And Pole Mount 90
2.9.1 Mounting Instructions 90
2.9.2 Corner And Pole Mount 91
2.9.3 Mounting To A Pole 93
2.9.4 Mounting To A Wall Or Building Corner 94
2.9.5 Mounting The Wall Mount To The Corner And Pole Mount 95
2.10 Replacing The MicroSD Card 96
2.10.1 Removing The MicroSD Card 96
2.10.2 Inserting A MicroSD Card 97
2.11 Network And Power Connection 98
2.11.1 Notes On Cable Lengths And Power Supply 98
2.11.2 PoE Variables 98
2.11.3 Power Supply Using A Switch 99
2.11.4 Power Supply When Connected Directly To A Computer 100
2.11.5 Power Supply (PoE IEEE 802.3af) Using Power-over-Ethernet Products 100
2.11.6 Camera Startup Sequence 101
3 OPERATING THE CAMERA 102
3.1 Manual And Automatic Operation - Overview 102
3.1.1 Manually Using A Computer In The 10.X.X.X IP Address Range 103
3.1.2 Automatically Using MxControlCenter Or MxEasy 104
3.1.3 Automatically Using DHCP 105
3.2 First Images And The Most Important Settings 106
3.2.1 Manually Setting Up The Network Parameters In A Browser 106
3.2.2 First Images And Configuration In The Browser 108
3.2.3 First Images And Network Parameter Configuration In MxControlCenter 110
3.2.4 First Images And Network Parameter Configuration In MxEasy 116
3.2.5 Starting The Camera With An Automatic IP Address (DHCP) 120
3.2.6 Starting The Camera With The Factory IP Address 121
/1�61�6
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
3.3 Virtual PTZ And Special Q24M Conguration 122
3.3.1 Preparing The Virtual PTZ Function 122
3.3.2 Special Q24M Configuration In The Browser 124
3.3.3 Overview Of The Available Camera Views 130
3.4 MicroSD Card Recording 134
3.4.1 Introduction 134
3.4.2 Formatting The Card 136
3.4.3 Activate Recording: 137
3.4.4 Accessing Camera Data 138
3.4.5 Deactivating The Card Memory 138
3.4.6 Using A MicroSD Card In A Different MOBOTIX Camera 139
3.4.7 Limitations On Warranty When Using Flash Storage Devices 139
3.� Q24M Storage Options - Full Image Storage 140
3.6 Further Conguration In The Browser 142
3.6.1 Overview 142
3.6.2 General Browser Settings 142
3.6.3 Additional Configuration Options 145
3.7 Additional Notes 146
3.7.1 Weatherproof Qualities 146
3.7.2 Password For The Administration Menu 146
3.7.3 Permanently Deactivating The Microphone 146
3.7.4 Starting The Camera With The Factory IP Address 147
3.7.5 Reset The Camera To Factory Settings 147
3.7.6 Activate Event Control And Motion Detection 147
3.7.7 Deactivate Text And Logo Options 147
3.7.8 Deactivating The Daily Automatic Camera Reboot 148
3.7.9 Browser 148
3.7.10 Cleaning The Camera And Lens 148
3.7.11 Safety Warnings 149
3.7.12 Additional Information 149
Notes and Copyright Information
The enclosed Camera Software Manual contains detailed information on the cam- era software. Download the latest version of this manual and the MxEasy and MxControlCenter manuals as PDF files from www.mobotix.com (Support > Manuals). All rights reserved. MOBOTIX, MxControlCenter, MxEasy, ExtIO and CamIO are inter­nationally protected trademarks of MOBOTIX AG. Microsoft, Windows and Windows Server are registered trademarks of Microsoft Corporation. Apple, the Apple logo, Macintosh, OS X and Bonjour are trademarks of Apple Inc. Linux is a trademark of Linus Torvalds. All other brand names mentioned herein may be trademarks or reg­istered trademarks of the respective owners. Copyright © 1999-2009 MOBOTIX AG, Langmeil, Germany. Information subject to change without notice!
Additional Information: www.mobotix.com
6/1�61�6
Q24M Camera Manual: Foreword
© MOBOTIX AG Security-Vision-Systems Made in Germany
www.mobotix.com sales@mobotix.com
FOREWORD
Dear MOBOTIX customer,
Congratulations on purchasing this globally unique and discreet hemispherical network
camera "Made in Germany". With its wide range of image display options such as
the panorama function, a virtual PTZ function and live distortion correction, the
Q24M offers whole new application possibilities. Proven MOBOTIX concept
advantages such as
as modern and highly beneficial long-term flash storage located directly in
the camera, are also available.
This Camera Manual Part 1 will give you an initial overview of the innovative
underlying MOBOTIX concept. This includes all the information you need to
unpack and install the camera (Chapter 2) and to view initial images on a PC
(Chapter 3).
Please see the Software Camera Manual Part 2, included in the camera packaging, for information on how to work with the many camera functions, such as e.g. event control or image storage.
If you would prefer to work with MxEasy or MxControlCenter instead of the browser con- trolled MOBOTIX camera software, you can download these programs for free including a manual (PDF) from the MOBOTIX website:
www.mobotix.com/eng_US/Support/Software-Downloads
If you have any questions, our support and international sales staffs are available under
intl-support@mobotix.com from Monday to Friday, 8 a.m. to 6 p.m (German time).
integrated event, alarm and telephony functions
, as well
We would like to thank you for your trust and wish you all the best with your new MOBOTIX camera!
7/1�61�6
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Q24M with 10° On-Wall Set
Q24M in the In-Ceiling Set
8/1�61�6
Q24M Camera Manual: The MOBOTIX Concept
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
THE MOBOTIX CONCEPT
HiRes Video Innovations
The German company MOBOTIX AG is known as the leading pioneer in network camera
technology since its founding in 1999, and its decentralized concept, has made high-
resolution video systems cost efficient. Whether in embassies, airports, railway stations,
ports, gas stations, hotels or on highways - over one hundred thousand MOBOTIX video
systems have been in operation on every continent for years.
Technology Leader Of Network Cameras
In a short time, MOBOTIX has gained the second place in Europe and the fourth place worldwide in terms of market share. MOBOTIX has been solely producing megapixel cameras for years and, in this area, ranks as global market leader in high-resolution video systems with a market share of over 60%.
Why High-Resolution Systems?
The higher the resolution, the more accurate the detail in the image. With the old analog technology, a live image has no more than 0.4 megapixels and a recorded image generally
0.1 megapixels (CIF).On the contrary, one MOBOTIX camera with 3.1 megapixels records around 30 times more detail. As a result, larger image areas with up to 360° allround views are possible, thus reducing the number of cameras and therefore the costs. For example, four lanes of a gas station can be recorded with one MOBOTIX camera instead of four conventional cameras.
Disadvantages Of Old Centralized Solution
Usually cameras only supply the images while the processing and recording is done later on a central PC using video management software. This traditional centralized structure has many limitations, since it requires a high network bandwidth and the PC processing power is not enough for several cameras. A HDTV MPEG4 film already puts considerable strain on a PC, how can it be expected to process dozens of high-resolution live cameras? Traditional central­ized systems are there­fore less suitable and unprofitable than high­resolution systems due to the high number of PCs needed.
9/1�61�6
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
The Decentralized MOBOTIX Concept
Unlike with other systems, with the decentralized MOBOTIX concept a high-speed computer and, if requested, digital memory (MicroSD/SD card) is built into every camera for long-term recording. The PC now serves purely for viewing, not for analysis or recording. As a result, MOBOTIX cameras can record in response to an event even without the PC being switched on and digitally store the videos with sound.
The Benets
MOBOTIX video solutions therefore require significantly:
fewer cameras due to the more accurate detail of panoramic images with mega-
pixel technology,
fewer PCs/DVRs• , because around 40 cameras can store high-resolution videos with
sound efficiently on a single PC, or no PC at all when recording in the camera using digital memory (USB, MicroSD/SD card),
lower network bandwidth , because everything is processed in the camera itself
and the high-resolution images therefore do not have to be constantly transported for analysis.
Robust And Low-Maintenance
MOBOTIX cameras have no mechanical motors for lenses or for movement. Without any moving parts, they are therefore so robust that maintenance is reduced to a minimum. The unique temperature range from -30°C to +60°C is achieved without heating or fan at approximately 3 watts. Since no PC hard disk is required for recording, there are no parts that wear out in the entire video system.
Software Included - For Life
There are no software and licensing costs with MOBOTIX, because the software is always supplied with the camera; for an unlimited number of cameras and users. The software package supplied with the camera also includes professional control room software, like that used in football stadiums, for example. Updates are supplied free of charge on the website. The system price for a weatherproof camera including lens, query software and day-to-day recording on the MicroSD/SD card is under 1,000 euro.
One Camera for 4 Gas Pumps - Long-Term Recording Without Peripheral Devices
10/1�61�6
Q24M Camera Manual: Innovative Hemispheric Technology
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
A Fisheye Perspective
INNOVATIVE HEMISPHERIC TECHNOLOGY
The Hemispheric Camera
The primary components of the hemispheric camera include a fisheye lens, a high-reso­lution image sensor and image correction software that is integrated into the camera. Using an ultra-wide angle fisheye lens, the camera captures a 180° hemispheric image of the room and projects it onto a high-resolution image sensor.
Fisheye
Hemispheric View
Q24M in the In-Ceiling Set
vPTZ 1
When ceiling mounted, the image area of the hemispheric camera covers the entire room. The image in the hemisphere is convex, particularly near the image borders. These image sections are corrected for the viewer by the integrated distortion correction software, allowing a view of the scene from the usual perspective. The virtual PTZ feature allows you to enlarge or move image sections within the hemisphere, just like a PTZ camera yet, with MOBOTIX, this is achieved with no moving parts.
Handle Several Image Sections At Once
One or more image sections can be corrected for perspective in the hemispheric view,
allowing you to monitor and record several different areas of a room at the same
time, something that a mechanical PTZ camera is not capable of doing.
Discreet And Low Maintenance
Hemispheric cameras are extremely discreet because they manage their
task with only one lens, which is generally focused on the entire room
and not a specific object. MOBOTIX hemispheric cameras are without
mechanical moving parts and require low maintenance. In addition, they
are silent when panning and focusing on a specific image area.
vPTZ 2
11/1�61�6
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Less Cameras Thanks To Panoramic Views
The perspective of the hemispheric image can also be transformed into an ultra-wide angle panoramic view spanning 180° if the camera is mounted on a wall, providing a wall-to-wall view of the room without any blind spots. It offers a substantially better view of the scene, compared to other cameras, it also results in the need for fewer cameras overall. When ceiling mounted, one camera can also capture an entire room by two opposite panoramic views.
Lobby
Hemispheric 180° Panorama
Overview of room using a single camera without any blind spots
Elevator
Elevator
Original Q24M image: Wall mounted at a height of 2.3 m
Hemispheric room cover­age for a wall mounting – one Q24M replaces four standard cameras
Keeping Objects In View At All Times
Using solutions featuring several individual cameras, moving objects will normally jump from one viewing area of a camera to another. This often produces a confusing situation for the viewer because objects may disappear from sight for a moment or even appear twice if the viewing areas overlap. This is not the case with hemispheric panoramic cameras. Objects remain in view at all times and the viewer can always keep good track of objects in the scene.
Everything Stored In The Recording
In contrast to a normal PTZ camera, which is always focused on one section of a room and only records that section, the virtual PTZ also allows you to pan to other areas at a later stage in the recording as the entire room can be recorded as a hemispheric image.
4 STANDARD CAMERAS
Capture less than one Q24M
Lobby
Elevator Elevator
Integrated MicroSD/SD card (up to of 32 GB)
12/1�61�6
Q24M Camera Manual: MOBOTIX Hemispheric Technology
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
High-resolution 180° Panorama
vPTZ
i
h
t
i
w
M
4
2
Q
Original Q24M image; Wall mounted at a height of 2.3 m in a bank
MOBOTIX HEMISPHERIC TECHNOLOGY
Perfect Room Overview
With the innovative MOBOTIX Hemispheric Technology, an entire room can
-
c
n
e
i
l
i
n
g
m
o
u
n
t
High-Resolution 180° Panorama
When several cameras are monitoring a single room, it is difficult to understand the room layout in its single view. This makes it hard to comprehend the overall setting. The new panorama function of the Q24M delivers a widescreen image of a high-resolution 180° allround view. High image quality is achieved through the use of a 3.1 megapixel sensor and the new hemispheric lens.
be ideally monitored. or instance, one single, particularly elegant and
discreet, Q24M replaces the time-consuming and expensive installation
of several standard cameras. This world first demonstrates again the
innovative strength of MOBOTIX as a global leader for megapixel video
security systems.
vPTZ control, also using a USB joystick
Virtual PTZ (vPTZ) – Without Motor
The Q24M also zooms in on detail. The image of the Hemispheric camera can be continuously enlarged and any image section examined using a joystick, for example. Thus you have a mechanical PTZ-camera without maintenance or wear and tear. While zooming into a section in the live image, a full image can be stored in the recording for later analysis. No PTZ-camera in the world that oper­ates with a motor can do that!
13/1�61�6
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
The Q24M Panorama: one camera - three simultaneous views
high-resolution 180° Panorama
virtual PTZ 1 virtual PTZ 2
One Camera, More Views
The surround function of the Q24M (ceiling mounted) immediately replaces four conven­tional cameras and shows four different directions simultaneously in quad view on a monitor. Virtual PTZ is available for each of the four views. Together with the 180° panorama the Q24M can deliver two more views simultaneously, making it possible to see the overview and to focus on two scenes at the same time (Display Mode “Panorama Focus“).
Highly User-Friendly
The full image from a hemispheric lens (Fisheye) is difficult to analyze. MOBOTIX solves this problem by perfectly straightening the uneven lines in the live image using the camera software. Since the image distortion correction of the hemispheric view and the generating of the panoramic view take place in the camera itself, no additional load is placed on the viewer PC, unlike a “standard” camera. Thus, displaying a large number of panoramic cameras simultaneously on a single PC is possible.
Panorama Focus: Original Q24M image
Highly Efcient Image Transferring
While other camera systems always transfer the full images via the network for further analysis, a MOBOTIX camera sends only the relevant image sections. Therefore, a Q24M panorama image needs only about 1/6 of the original data volume or bandwidth. This means up to six times more MOBOTIX cameras can transfer images over a network compared to “standard” cameras.
Internal DVR With 32 GB
The Q24M stores high-resolution video with sound directly on the integrated Flash memory without using an external recording device or PC, therefore using no additional network load. Old recordings can be overwritten automatically or deleted after a predefined period. The storage capacity is sufficient for around 400,000 panorama images or 33 hours of film (32 GB MicroSD).
14/1�61�6
Q24M Camera Manual: Superior Storage Solution
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
SUPERIOR STORAGE SOLUTION
The Market Demands Better Image Quality
When it comes to future-proof video surveillance systems, it is not a matter
of analog or digital but whether it is high-resolution or not. It is important
to note that HiRes video only with decentralized network camera technol-
ogy can be implemented at much lower cost than any other type of video surveillance system.
Central Storage As A Bottleneck
These days, video data is normally pre-processed and stored centrally on a
PC or DVR using video management software. Video and audio streams from all installed cameras are directed to this central device. This system is comparable to a highway at rush hour: the more cameras there are, the faster a data jam on the PC or DVR occurs. This means that despite HiRes cameras, the data is generally not stored in high-resolution format.
NON-MOBOTIX System
Motion detection and pre-
alarm buffer are in the PC
(bottleneck)
Storage
Central PC is a bottleneck and a risk for the total system
MOBOTIX Stores HiRes Cost Efciently
MOBOTIX solves the PC storage bottleneck problem using a unique and yet amazingly effective method - through the camera itself. High-resolution video with lip synchronized sound is saved either remotely over the network or locally on flash memory devices (com­mercial SD or CF cards, USB memory).
1�/1�61�6
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Flash memory is a sophisticated form of semiconductor memory without mechanical moving parts and represents the storage medium of the future thanks to its reliability, ease of use and low cost.
MOBOTIX System
Network
Software and storage integrated in MOBOTIX cameras
MOBOTIX Stores Data In Flash Memory
No PC / network is needed for operations and there is no network load
USB flash media can be connected directly to the camera (instead of internal SD/ MicroSD/CF card); no network is necessary
Greater reliability (no hard disk drive)
Ring buffer: Old images can be overwritten automatically or deleted after a speci- fied time
MOBOTIX Stores Data Reliably
MOBOTIX’ own flash file system (MxFFS) prevents unauthorized persons from reading or transferring the internally stored data, even if the card is stolen.
Mobotix Only Saves What Is Necessary
The MOBOTIX system includes three important additional options that allow more data to be stored for a longer time:
Only the relevant image sections are stored
instead of the entire image (for example, sky or ceiling is removed)
Video recording only begins when relevant
events take place (such as movement in the image)
Temporarily increased frame rate during continuous recording of events
By connecting external memory over the network (NAS), the system can be expanded without limi­tations even while it is running.
MOBOTIX Data Storage
Inside the camera • - one MicroSD card is enough
to record all day long, making central data storage devices or PCs unnecessary
in USB memory (connection via USB cable) data storage without mechanical moving parts or net- work load (greater protection against data theft)
A le server (NAS) can store around 10 times more data from MOBOTIX HiRes cameras (than usual)since they use a memory organization internally
16/1�61�6
Q24M Camera Manual: Added Security Value
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Q24M Panorama: one camera - three simultaneous views
high-resolution 180° Panorama
virtual PTZ 1 virtual PTZ 2
ADDED SECURITY VALUE
Robust, Low-Maintenance Technology
The real added value of MOBOTIX products is reflected in characteristics such as enhanced functionality, long life and robustness. MOBOTIX cameras basically have no moving parts. This makes the cameras very resistant to wear and tear, and reduces both maintenance costs and power consumption.
Alarm Management And Forwarding
Integrated sensors enable MOBOTIX cameras to
recognize when an event has occurred. If neces­sary, the cameras will respond immediately with an alarm tone and will establish a direct video and sound connection to a control room.
Absolute Data Security
The security barriers that are built into the camera are extremely secure. The camera images are only accessible to authorized persons and are encrypted via SSL when they are transferred over the network.
Notication Of Failure
MOBOTIX cameras will automatically report any impairment or failure. This ensures maximum reliability and readiness for use.
Subsequent Searches
Events rarely confine themselves to just one spot. So even when you are looking at an enlarged detail in live mode, it is always a full image that is recorded. And in this full image, any section can always be enlarged later or whenever necessary.
Floor plan and camera view in MxControlCenter (free control cen­ter software from MOBOTIX)
17/1�61�6
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Sound Increases The Chance Of Detection
In the event of an alarm, MOBOTIX cameras can turn on their built-in microphones and record lip-synchronous sound. They are therefore an even greater help in analyzing a situation and easing clarification. In addition, the video system can be used for bidirectional communication via a loudspeaker/microphone.
No Problems With Backlight
MOBOTIX cameras are not affected adversely by sunlight such as direct sunlight. They deliver meaningful, detailed images all the time, because the camera software supports easy programming of independent exposure windows to cope with specific situations. This makes them ideal for rooms with large glass fronts.
Vandalism-Proof Models
In critical environments or for outdoor use, it is often best to choose vandalism-proof MOBOTIX cameras. Their steel housing resists even the hardest attacks, and the cameras will deliver a perfect picture of the attackers.
Placing the exposure window in the lower image area (left image) deliv­ers less optimum results compared to moving three individual exposure windows up toward the windows (right image)
18/1�61�6
Q24M Camera Manual: Cost Benets And Technical Advantages
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
THE MOST IMPORTANT COST BENEFITS
Increased resolution reduces amount of cameras needed
1536-line, high-resolution sensors give a better overview and allow monitoring
1
an entire room with just one camera from the corner
Reduced installation costs at any distance
Standard Ethernet connection enables the use of use of common network
2
components such as fiber, copper and wireless (WLAN)
IIntelligent recording technology reduces required storage
Decentralized recording technology in the camera software puts less strain on
3
PCs and reduces the amount of storage PCs (DVRs) by 10 times
Event-controlled image rate minimizes storage costs
Event-driven, automatically adjusted recording frame rate based on event or
4
sensor action reduces amount of data and storage costs
No additional power and no heating required
Anti-fogging without heating allows usage of standard PoE technology to power
the system via network and saves costs of power cabling
Backup power requirement reduced by 8 times
Low power consumption, approx. 4 watts, enables year-round (no heating
6
required) PoE with one centralized UPS from installation room via network
Robust and practically maintenance free
Fiberglass-reinforced composite housing with built-in cable protection and no
7
mechanical moving parts (no auto iris) guarantees longevity
No software and no licence costs
Control and recording software is integrated in the camera and is free of charge;
8
new functions are available via free software downloads
Unlimited scalability and high return of investment
While in use, more cameras and storage can be added at any time; image
9
format, frame rate & recording parameters can be camera specific
Additional functions and other extras included
Audio support, lens, wall mount and weatherproof housing (-30° .. 60°C;-22°
10
.. 140°F) are included; microphone & speaker available in certain models
19/1�61�6
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
THE MOST IMPORTANT TECHNICAL ADVANTAGES
Progressive-scan instead of half-frame blur
Megapixel sensor and image processing inside camera with digital white balance generates sharp and true color images at every scale
Sun and backlight compensation
CMOS-sensor without auto iris, digital contrast enhancement and config­urable exposure measurement zones guarantee optimal exposure control
Dual camera technology: 2-in-1
Two possible camera views with picture-in-picture technology or 180° panoramic view; one Dual-Fixdome camera with 2.5 megapixel is enough
Long-term, high-performance Terabyte recording included
Event detection and ring buffer recording by the camera itself allow recording of 40 smooth video streams on a single PC (1200 VGA images/s)
Simultaneous recording, event search and live viewing
Live video for multiple users, recording and event search simultaneously possible in seconds from anywhere in the world via network
Very low network load
Efficient MxPEG video codec, motion detection based recording and video buffering inside camera guarantee a very low network load
1
2
3
4
6
Bridging of recording during network failures
Internal camera ring buffer bridges network failures and bandwidth fluctua­tions of wireless links (WLAN/UMTS) for several minutes
Day & night maintenance free
Unique Day/Night camera technology without moving parts guarantees extreme light sensitivity and ensures long-term reliability
Audio and SIP telephony
Lip-synchronized audio (live & recording); each camera is a video IP telephone based on SIP standard with automatic alarm call and remote control
MxControlCenter included
Dual screen technology with building plans, free camera positioning, event search, image processing, lens distortion correction and PTZ support
7
8
9
10
20/1�61�6
Q24M Camera Manual: INTRODUCTION
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Q
2
4
M
w
i
t
h
i
n
-
c
e
i
li
n
g
m
o
u
n
t
High-resolution 180° Panorama
INTRODUCTION1
Q24M Overview1.1
Innovative Hemispherical Technology For The Perfect Room Overview
The MOBOTIX Q24M Hemispheric camera is an elegant, ultra-compact and weather proof
IP network dome camera with a special hemispheric lens (fisheye). When mounted on the ceiling, the camera is capable of providing full 360° allround view or a 180° panorama when mounted on a wall. The first of its kind in the world, this camera is evidence of the MOBOTIX commitment to innovation as the global leader in megapixel video security cameras.
Original Q24M image; Wall mounted at a height of 2.3 m in a bank
Original full image
High-resolution 180° Panorama (Wall-Mounted)
When several cameras are monitoring a single room, it is difficult to understand the room
layout due to the different viewing directions of each camera. This makes it hard to comprehend the overall setting. The new panorama function of the Q24M delivers a widescreen image of a high-resolution 180° allround view. High image quality is achieved through the use of a 3.1 megapixel sensor and the new hemispheric lens.
21/1�61�6
Q24M Overview
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Q24 Panorama: one camera - three simultaneous views
high-resolution 180° Panorama
virtual PTZ 1 virtual PTZ 2
Panorama Focus – One Camera, Three Views (Wall-Mounted)
Maximum room overview while simultaneously viewing detail in a single image: the Q24M is capable of providing two more views at the same time with the 180° panorama, allow­ing you to focus on two scenes in parallel ("Panorama Focus" display mode).
Double Panorama For A Simultaneous View In Two Directions (Ceiling-Mounted)
When the camera is mounted in the center of the ceiling of a room, "Double Panorama"
display mode provides a corrected panorama image of both halves of the room. It cor-
responds roughly with the situation of personally standing in the middle of the room and being able to look both forwards and backwards at the same time. A superb overview for the user – provided by a single Q24M camera alone.
Panorama Focus: Original Q24M image
1
2 3
Original full image
Double Panorama: Original Q24M image
Original full image
22/1�61�6
Q24M Camera Manual: INTRODUCTION
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Full Image And Normal View
With innovative MOBOTIX Hemispheric Technology, an entire room can be ideally monitored.
For instance, one single, particularly elegant and discreet, Q24M replaces the time-consuming and expensive installation of several standard cameras. The overview image provided by a single Q24M, which may be tailored in a number of ways according to specific user require­ments, not only reduces the number of required cameras, but also minimizes the system costs by reducing the wiring complexity, emergency power requirements and number of recording devices required.
In addition to Panorama, Double Panorama and Panorama Focus views, the Q24M image may be displayed on a monitor in the original fisheye version ("Full Image" display mode), the camera-corrected full image ("Normal" display mode) or in a quad view of all four directions ("Surround" display mode). Switching to a different display mode is possible at any time within seconds.
Fisheye Original Image: Full image
Corrected Image Section: Normal
23/1�61�6
Q24M Overview
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
vPTZ & Zoom
vPTZ & Zoom
Surround View (Quad View), Based On The Correct Full Image
The Q24 “Surround” display mode replaces (when ceiling mounted) four cameras, and shows four directions simultaneously on the monitor in a quad view. The preset North position can be moved to any direction in the image; the camera generates the other three directions (East, South, West) automatically and stores them as separate views.
North
West South
Surround View: Quad
Each of the four views features a software-controlled pan/tilt/zoom function (virtual PTZ), allowing it to be customized as necessary.
In order to reduce user workload, the Q24M can store
in addition to the North, East, South and West standard views, a total of 2�6 user-dened camera views using the vPTZ function, which can easily be brought up using joystick keys or softbuttons. Besides being able to manually bring up specific camera views, the camera can also show them automatically by moving through the North, East, South and West views or by showing the first 16 saved camera views (one after the other like in a slide show).
East
Original Q24M image: Each of the 4 views can
be individually modied
Original full image
24/1�61�6
Q24M Camera Manual: INTRODUCTION
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
vPTZvPTZ
Quick and easy navigation with a USB joystick
Virtual PTZ (vPTZ) – No Motor Required
The Q24M can zoom in on detail as well. These vPTZ functions are a standard feature
in the integrated Q24M camera software. The image from the hemispheric camera can
be enlarged using e.g. the mouse wheel, a joystick or a software-controlled PTZ
panel, and you can "move" the view to any section of the image. This provides
the features of a mechanical PTZ camera without the disadvantages of main-
tenance and wear.
The vPTZ functionality works differently depending on the camera operation platform (web browser, MxEasy, MxControlCenter). Virtual zoom, pan and tilt using MxEasy and MxControlCenter is very simple thanks to special software tools and the use of an optional
joystick. However, a joystick may also be used even with pure browser-based operation
from Internet Explorer (together with an ActiveX plug-in).
2�/1�61�6
Q24M Overview
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Live Image Stored Full Image Full Image Evaluation
Live Image Stored Full Image Full Image Evaluation
Simultaneous Corrected Live Image And Full Image Recording
All conventional, motorized PTZ cameras only store the image that is currently viewed as the live image (live image recording). This has one serious disadvantage as the recording can only show what has happened in the "visible" portion of the image; the rest is lost and cannot be examined later on. For this reason, MOBOTIX has added the new full image recording feature to the Q24M. This will not store the currently viewed
image that reflects the pan/tilt position and the zoom setting chosen by the user, but the full sensor image - without vPTZ settings or image correction. When examining the recorded images at a later point in time, the vPTZ features again come into play, as they allow zooming the visible image and use the pan/tilt features to examine every corner of the recorded full image.
Example: The people marked by the red circle in the middle area of the image would not have been recorded by a regular PTZ camera; the full image recording of the Q24M allows to determine for example, the exact time at which the people entered the image area recorded by the camera. A Browser (Internet Explorer with MxPEG ActiveX plug-in),
MxControlCenter or MxEasy can be used to examine the recorded sequences.
Integrated vPTZ func­tions allow "analysis" of the complete saved full image at a later point in time (in MxEasy and MxControlCenter)
26/1�61�6
Q24M Camera Manual: INTRODUCTION
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Full image at 3.1 megapixel (2048 x 1536 pixels)
Panorama image at 0.6 megapixel (1280 x 480 pixels)
The camera software is responsible for image correction, reducing load on the user PC
Maximum Ease Of Use
The full image generated by the hemispherical lens (fisheye) can be difficult to evaluate. MOBOTIX solves this problem with image distortion correction in the camera software that displays perfectly corrected live images. The user PC does not experience any additional
load through this process, as image correction and generation of all desired image views takes place in the camera itself. The result is that a large number of panoramic cameras may be displayed simultaneously on a single PC.
Highly Efcient, Application-Oriented Image Transfer
While other camera systems must transport the full 3.1 megapixel image over the network for further processing, a MOBOTIX camera will only transmit the desired image sections. This means that a Q24M panorama image will only require a small part of the usual data and bandwidth. Data from up to six times as many MOBOTIX cameras may be transported over the same network compared to “standard” cameras.
Corrected image after panorama correction
Economical bandwidth usage due to smaller, in-camera corrected images (no loss of image information)
27/1�61�6
Q24M Overview
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Internal DVR
The Q24M SECURE model features direct recording to integrated
MicroSD cards, which makes the camera fully independent of any
external storage media, even for longer periods of time. The camera
internally saves high-resolution video and audio, without requiring an external storage device or PC or overloading the network what­soever. Old recordings may be overwritten automatically or deleted automatically after a specified period of time. A 16 GB MicroSD card, for example, allows the camera to store more than a quarter million event images in VGA format (640 x 480). For security reasons, the camera can even encrypt the stored data.
Power failures are not an issue, as the video and image sequences remain safely stored on the MicroSD card. Access to stored video sequences is possible at any time from the camera user interface in the browser, MxControlCenter or MxEasy. If you would like to archive sequences, you can store all of the data or only certain parts to a computer or external hard disk.
High Frame Rates Of Up To 30 fps
Like all other MOBOTIX cameras, the Q24M models can generate live video streams with high frame rates and a maximum image resolution of 3.1 megapixels (QXGA with 2048 x 1536 pixels). Up to 30 fps are generated at a megapixel resolution of 1280 x 960 pixels. Even at 3.1 megapixels, the camera will still generate up to 20 fps! And the audio playback is always lip-synchronous.
4 GB MicroSD card preinstalled in the camera (Q24M-Secure)
Robust And Maintenance-Free
Thanks to its low power consumption of approximately 3 watts and the total absence of mechanical moving parts, the Q24M models feature the highest operating temperature range from -30°C to +60°C (-22°F to +140°F). Both Q24M models (BASIC & SECURE) are absolutely dust proof to IP54, with the SECURE model being resistant against water jets (IP65) also. Since the cameras neither fog up nor require heating, power can be supplied all-year round via the Ethernet cabling using standard PoE products.
Camera Design Creates New Applications
Some application scenarios benefit from a surveillance camera that is present, but doesn’t attract attention. The low-key elegance of the camera’s design, especially when installed with the In-Ceiling set, makes the Q24M the ideal solution for the intersection of discreet design and inconspicuous look. For example, hotels and restaurants—not to mention
installations in public buildings, waiting rooms, and showrooms—present a suitable
backdrop for this type of equipment.
28/1�61�6
Q24M Camera Manual: INTRODUCTION
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Q24M in the In-Ceiling Set (local public transport bus)
Q24M in the In-Ceiling Set with stainless steel ring (elevator)
The integrated DVR functionality with long-term storage on a MicroSD card also makes the camera an ideal solution for mobile applications since it only requires a power sup­ply via the network cable (standard PoE) for full event-driven recording with video and audio, thus delivering a complete standalone product. Application examples in this con- text are installations in public transportation such as busses, trains, aboard ships, airplanes, etc.
Model Versions
The Q24M is available in Secure and Basic models, which come with different features.
Both models can also be ordered with an L22 Super Wide-Angle lens with a horizontal image angle of 90°.
29/1�61�6
Q24M: Next Generation Hemispheric Technology
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Q24M: Next Generation Hemispheric Technology1.2
The Q24M Hemispheric camera is the more powerful and optimized successor to the Q22M and is delivered with a recording capacity of 4 GB integrated as standard. The Q24M has a new microprocessor and a modified system platform. The result is more than twice the processing power, which enables smooth video frames rates, even in the high-resolution 180° panoramic view. In one of the most renowned and competitive international design competitions, the Hemispheric camera was the first security and surveillance camera to receive the red dot award.
Frame Rates Have Doubled
Even 3.1 megapixel camera images may be transferred at a rate of 20 frames per second, and megapixel images at up to 30 images per second.
User-Friendly Panorama Correction
In the standard “Panorama” view, the user may now switch between customized views of the live image at the click of a button.
4 GB MicroSD Card
Every Q24M Secure is delivered with a high-quality, factory-installed 4 GB MicroSD card (internal DVR) as a standard feature – sufficient for around 50,000 panorama images or 10 hours of HiRes continuous recording including audio (4 fps).
New, Waterproof Connections To The Camera
The network cable, MiniUSB and MxBus for IO extensions are easily connected over waterproof connectors with bayonet catch – without needing to open the camera hous-
ing – in the rear casing of the camera.
Adjustable PoE Classes, 1 to 3
The PoE class of the camera may be raised or lowered from the default value of 2 to 1 or 3 from the camera software, to precisely adjust the functionality of the camera, its accessories and the PoE switch.
New Audio Functionalities
Microphone and speakers are integrated and, thanks to the new HiFi audio component, the audio quality is once again improved and echoes during hands-free operation can now be suppressed. If data protection requires it, microphone and audio recording can
be irreversibly switched off by securing the hardware.
30/1�61�6
Q24M Camera Manual: INTRODUCTION
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
General MOBOTIX Camera Functions1.3
Like all other MOBOTIX cameras, the Q24M models include a range of (software) func-
tions, such as video motion detection, long-term recording, alarm messaging and video
IP telephony, to name but a few. Unlike in camera systems from other manufacturers,
buying and installing additional software on the computer is unnecessary. Instead of using a web browser, you can also download the free MxControlCenter software from the MOBOTIX website, which allows quick displaying of multiple cameras on one monitor, alarm switching with audio or an easy event search.
Camera vPTZ functions may be controlled with a mouse or joystick
Using a joystick: Internet Explorer with activated MxPEG ActiveX plug-in, MxControlCenter or MxEasy required
MxControlCenter and MxEasy can be down­loaded free-of-charge at www.mobotix.com
vPTZ: Virtual Pan/Tilt/Zoom Features
While MxControlCenter has provided virtual PTZ features for some time now, these features are now available directly via MOBOTIX camera. This means that you can continuously zoom into or out of the live image using either the mouse wheel or a joystick. When storing
images or video sequences, you can choose to store either the visible image area of the
live image or the full sensor image (full image storage). This also allows you to examine parts of an image or video that had not been visible in the live image section on display at the time of the recording.
Automatic Image Correction
Another problem familiar from the field of photography are the distortions that result from using wide-angle lenses. Straight lines near the image borders are bent outwards. The
integrated distortion correction features of the camera (and of MxControlCenter) allow correcting the curve of various lenses using software algorithms.
HiRes Live Video With Up To 30 fps, Including Audio
MOBOTIX cameras deliver smooth live video with lip-synchronous audio, yet they keep network load to a minimum. Some analog systems may also be able to do this, but the recording quality is much higher with MOBOTIX since the cameras efficiently store the
high, live image resolution and frame rate without compromising image quality. MOBOTIX technology thus provides for continuous recording of simultaneous video from 30 cameras at 30 frames per second each, including audio, all on one standard PC.
Low Bandwidth Requirements
MOBOTIX' patent pending MOBOTIX streaming format MxPEG allows fast live video with audio at extremely low network load (1 to 2 Mbps), even for high-resolution images. Since the MOBOTIX camera itself detects movements in the image (and not the computer), video sequences are only transmitted if movements occur.
Voice Over IP
Moreover, MxPEG provides for lip-synchronous live audio and two-way communication
between the camera and a computer. Room surveillance is possible using a browser (Internet Explorer), MxControlCenter or MxEasy. Customized alarm notification on your
Loading...
+ 128 hidden pages