Mobotix MX-EXTIO Specsheet
ExtIO-Module
ExtIO
ExtIO Opens New Horizons For Cameras
With its new ExtIO module, MOBOTIX leads the way
to completely new technology. The ExtIO can be
connected to a camera either directly via USB or
through a network and extends the MOBOTIX camera
to a high-performance audio unit with microphone
and speaker, infrared motion detector, temperature
sensor and additional switch in-/outputs. Door and
gate intercom systems are easy to implement using
the two illuminated buttons.
Technical Specifications ExtIO
Interfaces USB, Ethernet 10/100 Mbps
Audio Microphone and speaker,
Input contacts 2 signal inputs (galvanically separated)
Output contacts
Sensors Passive IR motion detector (PIR)
integrated amplifier and equalizer, Line-In/Line-Out
Safety extra-low voltage, SELV (AC/DC)
Switching voltage of ExtIO provided (also external)
2 signal outputs (potential-free)
Safety extra-low voltage, SELV (AC/DC), up to 100 mA
Temperature sensor for environmental temperature
Illumination sensor
2 illuminated buttons
ExtIO Available Accessories For ExtIO
ExtIO Extension Mod ule
MX-ExtIO
• Microphone/Speaker
• PIR sensor for motion
detection, temperature
sensor
• 2 signal inputs, 2 signal
outputs, 2 illuminated
buttons
In-Ceiling Set
MX-OPT-IC
• Consists of in-ceiling mount
and mounting parts
• Easy mounting from front
• Ø 150 mm installation
dimension
• Can be ordered with
stainless steel cover
Status display 2 status LEDs
Certificates EMC (EN55022, EN55024, EN61000-6-2, FCC part15B,
Operating conditions IP65 (DIN EN 60529)
Operating temperature
Power supply USB, Power over Ethernet (IEEE 802.3af; Class 2)
Power input typ. 1 W
Dimensions Ø x H: 16 x 4,5 cm, compatible with D24 accessories
Weight ca. 430 g
Standard delivery
On-Wall Set
MX-OPT-AP
• Consists of on-wall mount
and mounting parts
• Concealed cabling
• 165 mm x 37 mm
AS/NZS3548)
-30 to +60 °C (-22 to +140 °F) (DIN EN 50125)
Housing (high-resistance composites – PBT), white,
cable grommets, mounting parts, manual
Outdoor Wal l M ount
MX-OPT-WH
• Weatherproof (IP65) for
ExtIO
• Covers RJ45 wall outlets
• Space for expansion
modules (WLAN)
Pole Mount
MX-OPT-MH
• 3 mm stainless steel, white
• 2 stainless steel straps for
pole diameter 60-180 mm,
incl. mounting parts
Technical information subject to change without notice!
ExtIO – Intelligent Technology For Combined Systems
The practical and functional ExtIO module can be easily combined with all MOBOTIX cameras (except M1, M10, D10
und V10) and enables implementing door and gate intercom systems cost eciently.
www.mobotix.com
Loading...