Mobotix MX-CAMIO-POE User Manual

Megapixel

1280 x 960

software zoom

Security-Vision-SystemsSecurity-Vision-Systems

30 Frames/s

VGA (640 x 480)

10 fps Mega

-22°F to +140°F

Weatherproof

-30°C to +60°C, IP65

no heating necessary

IEEE 802.3af

PoE

network power

even in winter

microphone & speaker

Audio

bi-directional via IP

variable framerates

Video SIP Client

IP Telephony

alarm notify,

cam remote control

CamIO

User Manual

X

MOBOTIX

com

.

Video motion

multiple windows

precision pixel-based

lip-syncronized audio

Recording

event-ringbuffer

30 cams each 30 fps

Live viewing

30 cams at 30 fps

all on one screen

Backlight

safe using CMOS

without mechanical iris

Vandalism-protected

Lamp

Door

MOBOTIX

CamIO

Out1

8 to 48 V~

Out2

123

4

230 V~/115V~

56

7 8 10 11 1314 15 16

In1

In2

Line-In

Speaker

8

Microphone with
pre-amplifier

Speaker

8 to 230 V~ (8 to 48 V~)

8 to 230 V~ (8 to 48 V~)

Complete integration for web and security

Current PDF File:

www.mobotix.com > Support > Manuals

RJ45

Wall bracket

with cable cover

for RJ45 wall outlet

Robust

no moving parts

fiber glass housing

MOBOTIX AG • Security-Vision-Systems • Made in Germany

MOBOTIX ... the new face of IP video

www.mobotix.com • [e-mail] • 9.11.2007

MOBOTIX CamIO User Manual

Caution

Only qualified personnel may install and open the CamIO and con­nect it to the mains power; make sure that the relevant regula­tions of your country are respected!

It is imperative that all electrical wires have been disconnected
from the mains power when working on or servicing the CamIO!
Please also make sure to adhere to the applicable regulations for
this kind of work!

MOBOTIX will not assume any responsibility for damages from
faulty installations or inappropriate use!

Notes

Note: MOBOTIX offers inexpensive seminars that include a workshop and

practical exercises: Basic Seminar three days, Advanced Seminar two
days.

For more information, see www.mobotix.com

© MOBOTIX AG • Security-Vision-Systems • Made in Germany

www.mobotix.com • [e-mail]

MOBOTIX CamIO User Manual

CamIO User Manual

1 INTRODUCTION 4

1.1 MOBOTIX CamIO Concept 6

1.2 The MOBOTIX CamIO and MOBOTIX Cameras 8

1.2.1 Functional Overview of the CamIO Models 8

1.2.2 Connection Cables between CamIO and MOBOTIX Cameras 9

1.3 Important Notes 10

1.3.1 Safety Regulations 10

1.3.2 Cables for the MOBOTIX CamIO 10

1.3.3 Minimum Load at the Signal Outputs 11

1.3.4 Safety Notes for Operating the MOBOTIX CamIO 11

1.3.5 Maximum Cable Lengths 12

1.3.6 Charging the Rechargeable Battery (CamIO-ACplus) 12

1.3.7 Weatherproofness, Temperature Range 12

1.3.8 Cleaning Instructions 12

1.3.9 Additional Information 12

1/56

2 MOUNTING 14

2.1 Delivered Parts, Components, Dimensions and Connectors 14

2.1.1 Delivered Parts and Components 14

2.1.2 Wall Mount Foot and Housing 15

2.1.3 Dimensions and Drilling Template 16

2.1.4 Connectors and Wiring 20

2.2 Information on Connecting the MOBOTIX CamIO 22

2.3 Mounting the CamIO Wall Mount and the Control Cable 24

2.3.1 Mounting with an M12 Camera 24

2.3.2 Mounting with an M22 Camera 26

2.4 Mounting the CamIO Housing and Installing the Cables 28

2.4.1 Mounting the CamIO Housing on the Wall 28

2.4.2 Power Supply of the CamIO 29

2.4.3 Ethernet Connection of the CamIO 32

2.5 Connecting External Components to the CamIO 33

2.5.1 Connecting External Devices, Sensors and Audio Devices 33

2.6 Mounting the Camera on the CamIO 36

2.6.1 Connecting the Additional Speaker in the Wall Mount Foot 36

2.6.2 Connecting the Ethernet and the CamIO Control Cables 37

2.7 Wiring, Fire Prevention, Lightning and Surge Protection 38

2.7.1 Wiring 38

2.7.2 Fire Prevention 38

2.7.3 Lightning and Surge Protection 38

2.8 Accessories, Replacement Parts 40

© MOBOTIX AG • Security-Vision-Systems • Made in Germany

www.mobotix.com • [e-mail]

2/56

MOBOTIX CamIO User Manual

3 OPERATION OF THE CAMIO 42

3.1 Activating the CamIO 42

3.2 Configuration Sample 43

3.2.1 Functional Overview 43

3.2.2 Terminal Connections of the CamIO 44

3.2.3 Overview of the Configuration Steps 44

3.2.4 Configuring the MOBOTIX Camera 45

3.2.5 Configuring a Softphone 51

4 TECHNICAL SPECIFICATIONS 52

APPENDIX: DECLARATION OF CONFORMITY

DRILLING TEMPLATE (SCALE 1:1)

Download the latest versi­on of this document as a
PDF file from
www.mobotix.com:
Support> Manuals

Note

Download the latest version of this document as a PDF file from
www.mobotix.com, Support> Manuals.

Information subject to change without notice!

Copyright © 1999-2007 MOBOTIX AG, Kaiserslautern, Germany.

All rights reserved. MOBOTIX, MxPEG and MxControlCenter are worldwide
trademarks of MOBOTIX AG. Microsoft, Windows and Windows Server are reg­istered trademarks of Microsoft Corporation. Apple, the Apple logo, Mac and
Mac OSX are trademarks of Apple Inc. Linux is a trademark of Linus Torvalds.
All other marks and names mentioned herein may be trademarks or registered
trademarks of the respective owners.

© MOBOTIX AG • Security-Vision-Systems • Made in Germany

www.mobotix.com • [e-mail]

MOBOTIX CamIO User Manual

Notes

3/56

© MOBOTIX AG • Security-Vision-Systems • Made in Germany

www.mobotix.com • [e-mail]

4/56

MOBOTIX CamIO User Manual

1 INTRODUCTION

All CamIO models can be
used with the MOBOTIX
M12 and M22 cameras
(IT and Secure models).

The CamIO can switch
Ohm resistive loads with
max. 5A, (max. 500W
lamps at 230V or
300W lamps at 115V).

The MOBOTIX CamIO is the expansion box for connecting the MOBOTIX cameras

M12 and M22M (IT and Secure models). In the security and home automation

fields, the CamIO is the ideal supplement to the MOBOTIX cameras, if you want to
switch lamps, doors, control wires, pushbuttons or other external devices, evaluate
other sensors than those in the camera or use external audio devices (M12 models
only).

An external device (e.g. a lamp) connected to the CamIO-AC/ACplus can be
powered directly by the CamIO and is switched on or off using the first signal out
put of the MOBOTIX camera. The second signal output can be used for potential
free switching of another external device (e.g. door opener; max. 230V~ or 48V~/
68V=, depending on the CamIO model). This signal output can also be used to
connect the MOBOTIX camera to the input of an alarm system, for example.

You can also attach external sensors to the MOBOTIX camera via the CamIO, e.g.
to evaluate remote sensors, such as light barriers, reed switches, external PIR sen­sors or the output of an alarm system.

© MOBOTIX AG • Security-Vision-Systems • Made in Germany

www.mobotix.com • [e-mail]

MOBOTIX CamIO User Manual

Battery

5/56

When mounting the MOBOTIX CamIO, the foot of the CamIO wall mount replaces
the original foot of an M12 or M22 camera mount. The foot of the CamIO wall
mount covers the CamIO and reliably protects it against atmospheric exposure

(IP65). In addition, the foot of the CamIO wall mount also contains an additional
speaker, which is more powerful than the camera's internal speaker.

CamIO models

• CamIO-PoE: This model is supplied using

PoE (IEEE 802.3af), which powers the camera

and the CamIO itself. The signal output Out1
can switch one external device (max. 5A), if
max. 48V~ or 68V= have been connected
to terminals 1 and 2; the signal output Out2
can be used for potential-free switching of
another external device (max. 5A) with max.
48V~ or 68V=.
The CamIO-PoE also features two signal in-

puts, one audio input (Line-In) and one
audio output for directly connecting the supplied additional speaker

(max. 2.5W/8Ω).

MX-CAMIO-POE

PoE

Currently, the audio
features of the CamIO
can only be used with
M12 cameras. A future
version of the CamIO
will support external
speakers and micro­phones also on M22 cam­eras.

• CamIO-AC: This model has the same fea­tures as the CamIO-PoE, but it can be con­nected directly to utility power (230V~/
115V~) and can power one external device

with up to 230V~ current (Ohm resistive

load, max. 5A, max. 500W lamp on 230V~,
max. 300W on 115V~). It can also be used
for potential-free switching of a second exter­nal device (max. 5A) with up to 230V~/

115V~ at signal output Out2.

• CamIO-ACplus: In addition to the features of
the CamIO-AC, the CamIO-ACPlus has a re-

chargeable battery, which provides a
backup power supply for the M12 models

even during power failures (approx. 45 min­utes at 20°C/68°F, 20 minutes at -20°C/-4°F).

The CamIO AC and ACplus
versions are VDE-certi-

fied

230 V

115V

MX-CAMIO-AC-230

MX-CAMIO-AC-115

Using the backup power
feature of the CamIO­ACplus requires a
MOBOTIX M12. M22
cameras do not support
this feature yet.

© MOBOTIX AG • Security-Vision-Systems • Made in Germany

www.mobotix.com • [e-mail]

MX-CAMIO-ACPLUS-230

MX-CAMIO-ACPLUS-115

6/56

MOBOTIX CamIO User Manual

1.1 MOBOTIX CamIO Concept

Simple Installation

When designing the MOBOTIX CamIO, special focus was placed on easy installa­tion of the expansion box. The supplied drilling template facilitates mounting the
CamIO and connecting the cabling for devices and data connections is easy,
secure and weatherproof.

Directly supplying power to and switching of external devices

To supply power to an ex­ternal device (terminals 3
and 4), make sure that
the CamIO itself is con­nected to the power sup­ply (terminals 1 and 2).

The CamIO-AC and CamIO-ACplus models can directly power one device at sig-

nal output Out1 (230V~/115V~ at terminals 1 and 2 required), allowing you to

switch this device from the MOBOTIX camera (max. 5A, max. 500W lamp on
230V, max. 300W on 115V). You can use the second signal output Out2 for po­tential-free switching of another external device.

The CamIO-PoE model has similar possibilities for switching devices, but can only
switch loads of up to 48V~/68V=.

ETHERNET
CAMERA

ETHERNET

P

N

© MOBOTIX AG • Security-Vision-Systems • Made in Germany

www.mobotix.com • [e-mail]

MOBOTIX CamIO User Manual

7/56

Backup power using the CamIO-ACplus

The integrated rechargeable battery of the CamIO-ACplus model can bridge
smaller power failures and thus protects the integrity of the video and audio data.
At room temperature (20°C/68°F), the CamIO can power a MOBOTIX M12D for
about 45 minutes; at -20°C (-4°F), the CamIO still provides 20 minutes of backup
power. Providing backup power for an M22M using a CamIO-ACplus is currently
not possible.

Using external sensors

Using the two signal inputs of the CamIO, the MOBOTIX camera can monitor exter­nal sensors and apply the different mechanisms available to the camera for storing
audio/video and for sending notification messages.

Connecting audio devices to M12 Cameras

Using the audio terminal of the MOBOTIX CamIO (Audio-Out), you can attach the

supplied external speaker in the wall mount foot to the MOBOTIX camera

(2.5W/8Ω; M12 models only). If you connect an external microphone via an ex­ternal pre-amplifier to the Line-In terminals of the CamIO, the MOBOTIX camera will
also use this input device. It is likewise possible to connect the Line-In terminals of
the CamIO to the Line-Out connector of a computer.

Weatherproof

The CamIO-ACplus can
provide backup power for
a MOBOTIX M12D for
about 45 minutes.

Using the backup power
feature of the CamIO­ACplus requires a
MOBOTIX M12. M22
cameras do not support
this feature yet.

Currently, the audio
features of the CamIO
can only be used with
M12 cameras. A future
version of the CamIO
will support external
speakers and micro­phones also on M22 cam­eras.

The weatherproofness of the MOBOTIX CamIO has been tested extensively and
has reached IP65 (absolutely dustproof and resistant against water jets). Special
attention has been paid to the waterproofness of the power cables, for which spe­cial cable seals have been developed.

Robust and durable

Like all other MOBOTIX products, the CamIO has been designed for a long product
life. The housing from PBT-30GF is robust and reliably protects the interior of the
CamIO.

© MOBOTIX AG • Security-Vision-Systems • Made in Germany

www.mobotix.com • [e-mail]

8/56

All CamIO models can be
used with MOBOTIX
M12 and M22 cameras
(IT/Secure models).

Using the backup power
feature of the CamIO­ACplus requires a
MOBOTIX M12. M22
cameras do not support
this feature yet.

MOBOTIX CamIO User Manual

1.2 The MOBOTIX CamIO and MOBOTIX Cameras

1.2.1 Functional Overview of the CamIO Models

CamIO-PoE

Mx-CAMIO-POE

Hardware Features

Outdoor - weatherproof IP65 IP65 IP65

Power Supply

Integrated rechargeable battery

PoE

-

CamIO-AC

Mx-CAMIO-AC-230

Mx-CAMIO-AC-115

230 V~ / PoE

115V~ / PoE

-

CamIO-ACplus

230 V~ / PoE

115V~ / PoE

Mx-CAMIO-ACPLUS-230

Mx-CAMIO-ACPLUS-115

X

Currently, the audio
features of the CamIO
can only be used with
M12 cameras. A future
version of the CamIO
will support external
speakers and micro­phones also on M22 cam­eras.

Concealed cabling

Features

Audio Out (speaker/microphone)

Line In (microphone with pre-amp.)

Signal outputs

Signal inputs

Input voltage (terminals 1 and 2)

M12

X

X

2

2

8 to 48 V~

11 to 68 V=

X

M22M

-

-

2

2

M12

X

X

2

2

X

M22M

-

-

2

22

230 V~

115V~

Note

In order to use all features of the CamIO, make sure that you are
activating it in the camera software (Admin Menu> Manage
Hardware Expansions). Please note that you will need a software
version 3.3.1.x or higher on the MOBOTIX M22M and a software
version 3.1.0.x or higher on the MOBOTIX M12.

X

M12

X

X

2

230 V~

115V~

© MOBOTIX AG • Security-Vision-Systems • Made in Germany

www.mobotix.com • [e-mail]

MOBOTIX CamIO User Manual

1.2.2 Connection Cables between CamIO and MOBOTIX Cameras

Two cables are required to connect the MOBOTIX camera to the CamIO:

• Ethernet cable: Establishes the data connection and the power supply to the
camera.

9/56

• Control cable: Connects the serial interface (M12) or the USB interface (M22)
of the camera in order to provide the signal outputs and inputs of the cam­era at the CamIO. The different cameras require different control cables,
which need to be ordered separately.

Control cable for the MOBOTIX M12

The control cable re­quired for connecting the
CamIO is not part of
the standard delivery.
Always order a corre­sponding control cable
for your M12 or M22.

Control cable for the MOBOTIX M22M

MX-CAMIO-OPT-M12

MX-CAMIO-OPT-M22

© MOBOTIX AG • Security-Vision-Systems • Made in Germany

www.mobotix.com • [e-mail]

10/56

MOBOTIX CamIO User Manual

1.3 Important Notes

1.3.1 Safety Regulations

Caution

Only qualified personnel may install and open the CamIO and con­nect it to the mains power; make sure that the relevant regula­tions of your country are respected!

It is imperative that all electrical wires have been disconnected
from the mains power when working on or servicing the CamIO!
Please also make sure to adhere to the applicable regulations for
this kind of work!

MOBOTIX will not assume any responsibility for damages from
faulty installations or inappropriate use!

For information on al­lowed cable diameters
and lengths, see chap­ter4,

Technical Specifi-

cations

.

1.3.2 Cables for the MOBOTIX CamIO

Only use cables, which have been approved for the pertinent type of installation.
Always observe the allowed wire cross-sectional sizes (see table below) and the
maximum cable lengths.

• Connecting the power supply: To provide the power
supply to the CamIO, a two-wire cable is required. A
ground conductor is not needed. If a power cable with

CamIO

ground conductor is used, this wire must not be con­nected in the junction box. Instead, connect the ground
conductor of any attached device in the junction box.

Ground

Lamp

Make sure that the fuse for this cable is not stronger
than 16A.

Junction box

• Connecting an electrical device: In order to provide power to an external
device (Ohm resistive load, max. 5A, 500W lamp on 230V, max. 300W
lamp on 115V), the CamIO switches two wires (phase conductor and neutral).

A ground conductor for grounding the external device needs to come
from the junction box.

• Connecting signal wires and external sensors: Use suitable installation ca­ble for connecting another relay or a signal line (e.g. to an alarm system) or
an external sensor.

• Connecting the Ethernet cable: Make sure that you
are using a suitable eight-wire Ethernet installation ca­ble CAT5 (or higher) for connecting the CamIO to the
patch panel of a structured wiring system in a building.

Make sure that you are completely removing the
shielding of the Ethernet cable and that no part of
the shielding touches the circuit board.

© MOBOTIX AG • Security-Vision-Systems • Made in Germany

www.mobotix.com • [e-mail]

MOBOTIX CamIO User Manual

11/56

Allowed Cable Dimensions Solid AWG

Bottom terminal (terminals 1 to 16)

Ethernet terminal (cutting clamps)

Cable diameters should be tailored to the electrical load and must follow the applicable regulations.

0.14 to 2.5 mm

0.13 to 0.31 mm

2

2

26 to 14

26 to 22

Note

The length of the cables for signal wires and external sensors is

not restricted. You need to make sure, however, that the minimum

voltage at the corresponding terminal is reached (see chapter4,

nical Specifications

). A possible loss of voltage due to the resistance of

Tech-

the wires needs to be considered.

1.3.3 Minimum Load at the Signal Outputs

In order to avoid oxidation of the relay points, you should use minimum loads of
5V=/100mA.

1.3.4 Safety Notes for Operating the MOBOTIX CamIO

When installing the wiring inside or outside of buildings, make sure you always ad­here to the relevant regulations on wiring, fire prevention and protection against
lightning.

AWG:
American Wire Gauge (for
measuring cable diame­ters)

MOBOTIX recommends having MOBOTIX devices installed only by certified special­ists accustomed to installing network devices and having proper respect for the ap­plicable regulations regarding lightning protection and fire prevention as well as
the current technology for preventing damages from electrical surges.

More information is available at an institution such as the International Electro-
technical Commission (IEC, www.iec.ch) or at a manufacturer of protection de-
vices against lightning and electrical surges, such as Dehn (www.dehn.de).

Wiring

When installing the wiring, make sure to follow these guidelines:

• Outdoors: Installing the camera outdoors requires special precautions and
measures regarding the cables as well as lightning and surge protection
(see further below in this section).

• Wire lengths: The cable segments must not exceed the maximum allowed
cable lengths in order to ensure proper data transfer (see also section3.3,

Connecting the Camera to the Network and to the Power Supply

, in the cor-

responding camera manual).

• Avoid induction: When running data cables parallel to existing regular
power lines or high-voltage wires, make sure you observe the minimum dis­tances to the power cables.

© MOBOTIX AG • Security-Vision-Systems • Made in Germany

www.mobotix.com • [e-mail]

12/56

MOBOTIX CamIO User Manual

Fire Prevention

When installing the power lines to the camera, make sure you always adhere to
the relevant regulations on wiring and fire prevention at the site of the installation.

Lightning and Surge Protection

To prevent damage from lightning and power surges, make sure you follow these
guidelines:

• Lightning conductors: In areas exposed to lightning (e.g. on roofs), a dis­tance holder (1m (3ft) above and away from the camera) and proper light­ning conductors need to be installed in order to prevent lightning strikes into
the camera and to ensure that the energy of a lightning strike is properly led
to the ground.

• Surge protection: Make sure you have installed proper protection against
electrical surges in order to prevent damage to the camera, the building and
the network infrastructure. This includes surge protectors for 19" racks, add­ing an uninterruptible power supply (UPS) to the MOBOTIX camera, and in­stalling surge arresters or similar for routers, switches, servers, etc.

1.3.5 Maximum Cable Lengths

According to UL regulations, the length of the cable to a MOBOTIX camera must
be limited to 140feet or less running outside of buildings. The installation must
comply with articles 725 and 800 of the National Electric Code.

1.3.6 Charging the Rechargeable Battery (CamIO-ACplus)

The CamIO-ACPlus model features a rechargeable battery, which provides
backup power supply even during power failures (approx. 45 minutes at 20°C/

68°F, 20 minutes at -20°C/-4°F). Please note that the full capacity of the recharge­able battery is only available after the CamIO has been attached to mains power
for at least 48 hours.

1.3.7 Weatherproofness, Temperature Range

The housing of the MOBOTIX CamIO is weatherproof (IP65, absolutely dustproof,
resistant against water jets) and can be used at temperatures from -30 to +60°C

(-22 to +140°F).

1.3.8 Cleaning Instructions

The housing of the MOBOTIX CamIO and the wall mount foot are made of fiber-re­inforced PBT-30GF. This material is robust, maintenance-free and can be cleaned
using a mild household detergent without solvents or abrasive particles.

1.3.9 Additional Information

For additional information on the MOBOTIX CamIO, see www.mobotix.com.

© MOBOTIX AG • Security-Vision-Systems • Made in Germany

www.mobotix.com • [e-mail]

MOBOTIX CamIO User Manual

Notes

13/56

© MOBOTIX AG • Security-Vision-Systems • Made in Germany

www.mobotix.com • [e-mail]

14/56

MOBOTIX CamIO User Manual

2 MOUNTING

2.1 Delivered Parts, Components, Dimensions and Connectors

2.1.1 Delivered Parts and Components

Allen screws M6x40 (item6)

Washers ø6.4mm (item7)

Speaker with audio

Allen wrench 5mm (item12)

cables (item11)

The control cable requi­red for connecting the
camera to the CamIO is
not part of the standard
delivery. Always order
the corresponding control
cable for your M12 or
M22.

NET plug (item5)
Screw caps for wall
mount (item10)

Control cable for the CamIO (not
included in delivery; needs to be
ordered separately!)

Item Count Part Name

1
2
3
4
5
6
7
8
9

10

11
12
13
14

1
1
1

8

1
4
8
4
4
4
2

1

1

1

CamIO Wall Mount Foot
CamIO Housing
Cover for wall mount
Cable seals (4x with 3, 4x with 5 fingers)
NET plug
Allen screws M6x40
Washers ø6.4mm
Wood screws 5x80mm
Dowels 8mm
Screw caps for wall mount
Speaker with audio cables (mounted in wall mount foot)
Allen wrench 5mm
Wood screw 3x10mm
Washer ø3.4mm

Cable seals with 3/5
fingers (item4)

Cover for wall mount foot (item3)

Wood screws 5x80mm (item8)

Dowels 8mm (item9)

© MOBOTIX AG • Security-Vision-Systems • Made in Germany

www.mobotix.com • [e-mail]

MOBOTIX CamIO User Manual

2.1.2 Wall Mount Foot and Housing

The MOBOTIX CamIO housing (item1) and the housing of the CamIO itself (item2)
are made of white, fiber-reinforced plastic (PBT-30GF, Polybutyleneterephtalate
with 30% fiberglass). This material is used heavily in the automotive industry and
is sturdy, resistant against high temperatures, environmental influences, chemicals,
etc.

CamIO Wall Mount Foot

Additional speaker
(pre-installed)

15/56

The additional speaker
can currently only be
used with M12 cameras.
A future version of the
CamIO will support ex­ternal speakers and mi­crophones also on M22
cameras.

CamIO Housing

NET connection for Ethernet cable to the camera

Connector for control
cable to the camera

Terminal connectors for
Ethernet link to the network

Terminal connectors for power supply, external devices, sensors and audio devices

© MOBOTIX AG • Security-Vision-Systems • Made in Germany

www.mobotix.com • [e-mail]

16/56

The appendix of this man­ual contains a 1:1 drilling
template for drilling the

dowel holes for the

CamIO.

MOBOTIX CamIO User Manual

2.1.3 Dimensions and Drilling Template

Dimensions of the MOBOTIX CamIO Housing

100mm/3.94in

100mm/3.94in

25mm/1in

© MOBOTIX AG • Security-Vision-Systems • Made in Germany

www.mobotix.com • [e-mail]