MobiWireS 3Q MOBIPRINT3 User Manual

Manufactory: MOBIWIRE MOBILES (NINGBO) CO.,LTD

Address

No.999,Dacheng East Road,Fenghua
City,Zhejiang Province，China

Postal
Code

315500

Fax

[phone]
Contact

Xu linzhong

Tel

[phone]

Email:

[e-mail]

1

Table of Contents

1.Foreword .......................................................... 3

2.Getting to know your touch device ................. 6

3.Starting up the device ...................................... 7

4.Introduce the basic device function................ 9

5.Technical Specifications ................................ 14

6.SAR ................................................ 16

2

Foreword

Safety

In order to ensure the device is used safely and correctly, please
read the precautions below carefully before use.

1.1 General precaution

·Your device is only suitable for the battery and charger
approved by our company or else it may cause the battery to
leak, overheat, explode or even catch fire.

·Do not knock, vibrate or throw the device heavily to avoid
malfunction, fire, overheating, explosion or fire.

·If there are abnormal phenomena, like temperature rising, color
change or distortion during the usage, charging or storage of the
battery, please stop using it and replace it with a new battery.

·It may burn the skin if liquid in the battery leaks onto skin or
clothes. If this happens please flush with plenty of clean water
immediately and go to a hospital at once.

·Please keep the battery away from fire to avoid fire and
explosion if the battery leaks or emits a strange smell.

·Do not place expose the battery to moisture or it may cause
overheating, fumes and corrosion.

·Do not use or place the battery under direct sunlight, or in hot
places, it may cause leakage and overheating, thus reducing
performance and shortening the lifespan.

·Do not charge the battery for over 24 hours continuously.

1.2 Precaution for the use of charger

·Do not cause short circuit to the charger, or it may cause
electric shock, fumes and damage to the charger.

·Do not use the charger if the power wire is broken, or it may
cause fire and electric shock.

·Please remove accumulated dust on the power plug.

·Do not put water containers next to the power supply to avoid

overheating, fire, electric shock and malfunction in case they
come into contact.

·Do not disassemble or tamper with the charger or it may cause
personal injury, electric shock, fire and the damage of the
charger.

·Do not use the charger in places of high humidity, like
bathrooms, or it may cause electric shock, fire and damage of
charger.

·Do not touch the charger, power cord or power plug with wet
hands or it can cause electric shock.

·Do not put heavy objects on the power cord or change the

3

power cord or it may cause electric shock and fire.

·Please unplug the power socket before cleaning and
maintenance.

·Please hold the charger to unplug the socket as pulling the
power cord may damage the power wire and cause electric
shock and fire.

1.3 Cleaning and maintenance

·As the device, battery and charger are not waterproof, do not
use them in places of high humidity and avoid them being wet by
rain.

·Please clean the battery and charger with a soft dry cloth.

·Never use alcohol, thinner or solutions, like benzene, to wipe

the device.

·Dirty sockets can cause poor contact and power down, and
even make recharging unavailable. So, please clean them
periodically.

1.4 Common Precaution
Device:

·Please use the device in an environment with temperature ：
Charging -10℃ - 55℃；Discharging -10℃- 55℃. Operating
Relativity Humidity Range：≦75%.

·Please use the device far away from regular telephones, TV
sets, radio sets and office automation equipment, to avoid
affecting the normal use of these equipments and mobile device.
Battery:

·Store the battery in cool and ventilated place without direct
sunlight.

·The battery has a limited lifespan. The usage of battery will be
shortened progressively due to frequent charging. Once the
battery is out of use, it means that its lifespan has ended, and
you will need to replace it with an approved new battery.

·Do not dispose of old batteries as household waste. Give them
to specified disposal places and follow any stipulated
instructions for disposal.
CAUTION:RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCYIONS.
Charger:

·Do not charge under following conditions:

-- places with direct sunlight

-- places with ambient temperature less than 0℃ or over 40℃,
wet or dusty places with strong vibrations (it may cause
malfunction)

4

-- places near electrical appliances (it may affect the image and
sound) like TV set, radio, etc

-- Adapter shall be installed near the equipment and shall be
easily accessible. The plug considered as disconnect device of
adapter.

5

Getting to know your touch device

6

Starting up the device

To remove the back cover

·Make sure your device is turned off.

·Firmly hold the device with the front panel facing down.

·Slide your finger into the groove at the top of the device and

gently pull open the back cover.

To install the SIM card

·Remove the battery if it is installed.

·Locate the SIM card slot, and then insert the SIM card with its

gold contacts facing down and its cut-off corner facing out of the
card slot as shown in the diagram.

·Slide the SIM card completely into the slot
Note: The device can support two SIM cards. The card will
support 2G card.

To install a memory card

To have additional storage for your images, videos, music and
files, you can purchase a memory card and install it in your
device.
Locate the memory card slot on the upper part of the exposed
right panel.
Insert the memory card into the slot with its gold contacts facing
down until it clicks into place.

To install the battery

1. Align the battery’s exposed copper contacts with the battery
connectors at the bottom part of the battery compartment.

2. Insert the contacts side of the battery first and then gently
push the battery into place. Replace the back cover.

Charging the Battery

New batteries are shipped partially charged. Before you start
using your device, it is recommended that you install and charge
the battery. Some batteries perform best after several full
charge/discharge cycles.
Note: Only the AC adapter and USB sync cable provided with
your device must be used to charge the device.
Connect the USB connector of the AC adapter to the sync
connector on your device, and then plug in the AC adapter to an
electrical outlet to start charging the battery.
As the battery is being charged while the device is on, a
charging icon appears in the title bar of the Home screen. After
the battery has been fully charged, a full battery icon appears in
the title bar of the Home screen.
Warning:

7