MOBILUS COSMO GTW Quick Start Manual

www.mobilus.pl/en

Quick start guide to

MOBILUS COSMO | GTW central

3. Package contents.

1. Product description.

2. Available ports.

Power supply with
micro USB cable.

Ethernet socket.

COSMO | GTW is an advanced central in the MOBILUS
SMART HOUSE SYSTEM. COSMO | 2WAY wireless tech­nology of bi-directional communication enables easy and
convenient control of household automatics: drive-in and
garage doors, roller shutters, blinds, awnings, lighting,
on/off electrical receivers. The central controls up to
100 appliances which may be combined into groups of
appliances and ascribed to defined places. Appliances ad­ded to COSMO | GTW central may be controlled from any
place in the world via phone, tablet or internet browser.

Micro USB socket for power
supply.

Reset button.

SMA antenna socket.

Quick guide.

COSMO | GTW

central.

Network cable
Ethernet.

1 2 3 4

2

4. Signal diodes.

5a. Connecting the central to the home

network by a network cable.

Power

COSMO
Signal

Remote
communication

WI-FI
communication

3

IMPORTANT ! It is recommended to connect the COSMO | GTW central to
the router by means of the Ethernet network cable. Communication with
internet will be more stable and other devices will not cause interference in the
communications between the central and the network.

Connect the power cable to the COSMO | GTW central. Connect the central
with house router by means of the Ethernet network cable. The central is
being activated for approximately 60 seconds which is indicated by cyclic
blinking of the diode. The central is ready for use if diode 1 (power) and diode
4 (Wi-Fi connection) are only on.

1

1 2 3 4

4

If the IP address is opened properly in
the browser, a window for logging into
the CONTROL PANEL of the central will
appear. Default data is as follows:

After the confirmation of the logging data, a window for entering new user’s
password will appear. When the password is confirmed, the CONTROL
PANEL of the central will open.

Login: admin
Password: admin

IMPORTANT ! For security reasons, it is not possible to recover the created

password. It should be memorised or kept in a safe place. If the password is
lost, the central needs to be reset to factory settings (loss of all settings).

2

3

Download and install MOBILUS FINDER application for Windows. You will find it
on the following website:

http://mobilus.pl/files/software/gtw/mobilusfinder.zip

Run the MOBILUS FINDER programme.
Press the FIND button. If the central is
connected properly to the network, IP
address of the central will appear in the
window. Select it and press the OPEN
button. It is also possible to open the IP
address by an internet browser. In order
to do that, type the retrieved IP address
in the browser and confirm it.