Page 1
BH-P05
Bluetooth Speaker
Microphone Adapter for
Radio User Manual
1. Introduction of the product
2. Pairing with your Bluetooth
Speaker Microphone Adapter
1. Press the PTT button down and
hold it.
2. Switch the power from OFF to
ON.
3. Waiting for the LED shows blue
and red light flashing alternately.
4. Release PTT and it is coming to
pair mode.
PTT
Velcro Tape
LED
Power Switch
Charge Hole
Press and hold
Power on
Page 2
3.Pairing with your Bluetooth
Radio Dongle
1. Plug the dongle to your radio.
2. Press the PTT button down and
hold it and turn on the radio.
3. Waiting for 3 seconds the LED
will begin twice flash per
second. Then release PTT, It
means coming to pair mode.
4. Using
1. After pairing the Bluetooth
Speaker Microphone and
Bluetooth Radio Dongle , Both
of the LED blue light will be 4
flashes/sec. It stands for
successful pairing.
2. You can hear and press PTT on
the Bluetooth Speaker
Microphone Adapter, and then
can talk with another radio in
same channel (please take the
Bluetooth microphone near
your mouth).
Press
and hold
5. Charge
1. When LED red light on, it means
the Bluetooth speaker
MobilitySound Technology LTD.
www.mobilitysound.com
info@mobilitysound.com
microphone adapter ‘s battery
is low voltage.
2. Please connect the charge cable
into the charge hole for
charging, then the LED light will
still red on.
3. While the Bluetooth speaker
microphone adapter is charging,
you can use it.
4. When charging is finish, the
LED light will transfer to green
light.
Loading...