MobileVision M130C Installation Manual
Model: M130C
For Technical Assistance, please call (800) 638-3600,
or visit www.magnadyne.com
7” Color LCD Monitor
Owner’s/Installation Manual
2
Warning
Backing Up Your Vehicle
Do not backup your vehicle while looking at the monitor. Always look in the direction of your
vehicle’s motion. Use the monitor only as an aid in safety confirmation. The actual distance
may be different than it appears in the monitor. The range of the image in the monitor is limited. Always be aware that blind spots may exist and not appear at all times on your monitor.
The product is intended to assist in safe driving and allows the driver to have a broader field
of vision during backup. You, as the driver, are solely responsible for the safe operation of
your vehicle and the safety of your passengers and pedestrians, and for abiding of all state
and local traffic regulations. Do not use any features of this system to the extent it distracts
you from safe driving. Your first priority while driving should always be the safe operation
of your vehicle. MobileVision will not accept any responsibility whatsoever for accidents
and/or injuries resulting from failure to observe these precautions or safety instructions.
Caution
Introduction
Congratulations on the purchase of a quality MobileVision 7” LCD Monitor. This system has
been designed to provide years of trouble-free operation.
The information enclosed provides a quick reference of the operations and maintenance of the
new monitor.
This product must be installed and used in accordance with this manual. Any alterations to this
product that enables it to be used in any way other than intended or designed could distract the
driver and result in an accident causing injury or death. Magnadyne Corporation disclaims any
and all liability that may result from failure to install and operate in any other manner in which
this was intended.
• FCC REGULATIONS STATE THAT ANY UNAUTHORIZED CHANGES OR MODIFICATIONS TO THIS
EQUIPMENT MAY VOID THE USER’S AUTHORITY TO OPERATE IT.
• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR
MOISTURE.
• THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.
• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE, USE ONLY THE
RECOMMENDED ACCESSORIES.
Introduction ................................................................................................................................................. 2
Warning / Caution ........................................................................................................................................ 2
Monitor Features and Controls .................................................................................................................... 3
Remote Control Functions ........................................................................................................................... 4
General Operation ..................................................................................................................................... 4-5
Front Panel Video Input ............................................................................................................................... 6
Wiring Diagrams ...................................................................................................................................... 7-8
Installation Instructions .......................................................................................................................... 9-10
Maintenance.................................................................................................................................11
Trouble Shooting ....................................................................................................................................... 11
Warranty .................................................................................................................................................... 12
Table of Contents
3
Monitor Features and Controls
1. LCD Screen
2. IR Sensor: Receives signal from the
remote control.
3. Power Button (
): Press this button to
turn the unit “On” or “Off”.
Note: The ignition key must be in the
“On” position.
4. Source (SRC): Press this button to select
a video source (AUX, LEFT CAM, RIGHT
CAM and REAR CAM).
Note 1: When the left turn signal is activated, LEFT CAM (left side view camera)
is selected automatically.
Note 2: When the right turn signal is
activated, RIGHT CAM (right side view
camera) is selected automatically.
Note 3: When the vehicle is put into
reverse, REAR CAM (rearview camera) is
selected automatically.
Note 4: When in reverse, you can use
the LEFT or RIGHT button to select the
left and right side cameras as needed.
5. Menu Button (MENU): Press this button
to select a desired menu screen.
6. Volume Down / Menu Item Adjustment
Button: Press this
button to decrease the
monitor’s volume.
Note: When the menu is displayed, press
this button to adjust the selected menu
item.
7. Volume Up / Menu Item Adjustment
Button: Press this
button to increase the
monitor’s volume.
Note: When the menu is displayed, press
this button to adjust the selected menu
item.
8. Auxiliary Audio/Video Jack:
Accepts 1 video and 1 audio (mono)
input. Optional HAR-M130-AUX
cable required.
9. Speaker The speaker is automatically
activated.
Note: The rear camera must have a builtin microphone for proper operation.
LEFT
RIGHT
MENU
SRC
REAR
Remote Control Functions
1. Power ( ): Press this button to turn the
unit “On” or “Off”.
2. Volume : Press these buttons to
increase or decrease volume level.
3. Up Arrow: Press this button to move
through the functions in the menu.
4. Left Arrow: Press this button to adjust
menu functions or to decrease the
adjustments for the monitor’s picture.
5.
Source: This model is a 5 source monitor.
Press this button to select a video source
(AUX, LEFT CAM, RIGHT CAM and REAR
CAM).
6. Mute: Push to “Mute” the speaker.
7. MENU: Press this button to select a
desired menu.
8. Right Arrow: Press this button to adjust
menu functions or to increase the adjustments for the monitor’s picture.
9. Down Arrow: Press this button to move
through the functions in the menu.
1
2
4
3
5
6
8
7
9
POWER
MUTESRC
MENU
VOLUME
4
Adjusting the Volume
Press the volume down/up buttons on the monitor
to adjust the volume level of the front speaker.
Note: To adjust the volume during backup mode, push the
MENU
button, then select
AUDIO
. Use the buttons to
control the volume level.
General Operation
Turning the Monitor On:
The monitor is operational by activating the ignition key
then manually pressing the power switch on the unit.
Note: If the ignition key is turned off while the unit is
on, the monitor will automatically become operational
the next time the ignition key is turned on.
Dimming the Monitor
Press and hold the power button for 3 seconds to
manually toggle between the daytime and nighttime
view for the screen.
+
Loading...