1. Introduction
Thank you for your purchase. The
M100 PowerSmart Bluetooth Headset
is an advanced wireless headset for
Handsfree operations. The M100 can be connected to any Bluetooth device that supports a Headset or
Handsfree profile. Three comfortable earpiece sizes are included for an individualized secure fit.
The
M100 PowerSmart Bluetooth Headset
is convenient to wear and very lightweight. With its easy twist and
fold design and modern architecture, you can drive or walk the streets with Handsfree confidence.
This instruction manual will get you started!
1.1. Product Features
Bluetooth V2.0, 1.2, 1.1 compliant
Supports Headset & Handsfree profiles
High performance built-in speaker
Noise suppression and echo cancellation
Red and blue LED indicators for Bluetooth operations, battery and charging
Up to 6 hours of talk time and 150 hours of standby time
Ultra Power Saving Mode up to 60 days
Smart Connection™ Allows you to answer calls by simply folding the Headset
Auto key lock prevents accidental calls when in the upright unfolded position
Three (3) Ear Bud sizes for comfortable individualized fit
Charge with either of the included AC charger or USB adapter
1.2. Product Specifications
• Weight – less than 10 grams
• Standards – Bluetooth Specification 2.0 compliant
• Range – 10 meters
• Support Profile – HSP, HFP
• Charger – USB Adapter, AC Adapter
• Charge Time – 2 hours
• Dimensions – 60 mm x 19 mm x 14.8 mm
1.3. Package Contents
M100 PowerSmart Bluetooth Headset
USB Adapter - AC/DC Charger Adapter
Ear Buds (3 sizes)
Lanyard (strap & clip)
User’s Manual
2. Operating Procedures
B
uttons
MFB
(Multi-Function Button)
VOL UP (+)
VOL DOWN (-)
2.1. Charging the Battery
Before using the headset, charge the battery for at least 2 hours
.
Charge with either the AC Charger or connect the USB Adapter to your computer.
While charging, headset LED will turn red. When fully charged, LED will turn blue.
2.2. Switching the Bluetooth Headset ON/OFF
To power the headset on, click and hold MFB until Headset LED lights up blue and then periodically
blinks blue.
To switch power off, click and hold MFB until Headset LED lights up red and shuts down.
2.3. Handsfree Operations
Function Action / Tone Indicator
Pairing Mode Powered OFF, click and hold MFB continuously for about 8 seconds until LED is
continuously displayed. From a Bluetooth phone, search for device and establish the
connection. If prompted for pin key, enter ‘0000.’ The LED will flash 10 times once
connected.
Answer Call Answer call by folding headset. If headset is already folded, press the MFB on your
headset to answer call.
Make Call Most phones automatically connect to headset once phone number is dialed. If your
phone does not support this function, press the MFB for one second to transfer the
call.
Redial Press the MFB for one second.
Note: When MFB is pressed, some phones display the last number dialed or received.
Press MFB again to redial. Most phones allow direct redialing by clicking MFB just
once.
Voice Dial Make sure your phone supports voice dialing and that it is activated. Ensure voice tags
have been recorded. To voice dial, press MFB in idle Handsfree mode. Follow the
instructions message from your phone to complete voice dialing.
Volume Control Click (+) or (-) to adjust volume during Handsfree mode. The tone will increase or
decrease sound while being adjusted.
End Call Press MFB. If the other party ends the call first, the headset automatically returns to
Handsfree standby mode.
Reject Call Press and hold MFB until mobile phone stops ringing.
Ultra Power Save Mode Setting: Press and hold the MFB and volume (-) button simultaneously until the LED
light blinks.
Releasing: Press and hold the MFB and volume (+) button simultaneously until the
LED light blinks.
Mute While talking, press the volume (+ or -) button for one second. To reengage or un-
mute, press the volume (+ or -) button for one second.
Call Waiting/On Hold To place a call on hold and answer another call, press the MFB for one second and
answer the second call. Press the MFB for one second to switch back and forth
between calls. Press the MFB for less than a second to end a call.
Adjusting Transmitted
Sound Level
Factory settings are set in the middle of five level settings. Adjust volume when
headset is folded, press and hold the volume (+) button for eight (8) seconds to
increase one level. To increase the volume more repeat the same step. To lower the
volume, press and hold the volume (-) button for eight (8) seconds to decrease one
level.
• Default setting – Purple LED blinks two times.
• One level up from factory setting – Blue LED blinks one time.
• Two levels up – Blue Led blinks two times.
• One level down from factory setting – Red LED blinks one time.
• Two levels down – Red LED blinks two times.
Setting LED Blinking
Mode
LED Blinking on: In type fold, press and hold volume up (+) and volume down (-)
button simultaneously until the blue LED blinks. In this mode, blue LED blinks
periodically.
LED blinking off: In type fold, press and hold volume up (+) and volume down (-)
button simultaneously until the red LED blinks. In this mode, red LED blinking stops.
3. Troubleshooting
•
I hear electronic static noises – For best sound quality always wear the headset on the
same side as your mobile phone.
•
I can not hear anything – In crease the volume of the headset, ensure the headset is paired
with the mobile phone.
•
I have problems pairing even though my phone indicates it is connected – You may have
deleted your headset pairing connection on your phone. Follow the pairing instructions in
your phone’s user manual.
•
Will the M100 work with other Bluetooth devices? – The Mobile Edge M100 is designed to
work with Bluetooth mobile phones. It will work with other Bluetooth devices that are
compliant with Bluetooth version 1.1, 1.2 and support a headset/Handsfree profile.
4. General Information
•
Avoid storage of extreme temperatures, as this will affect the battery life of the M100.
•
Do not expose the M100 to rain or other liquids.
•
Keep away from children and animals.
•
Please do not disassemble.
•
Please only use the certified charger that came within the original packaging.
5. Warranty
Mobile Edge is pleased to provide the original purchaser of this accessory product a warranty
for defects in material or workmanship under normal use and service for one year from the date
of purchase. If you need to make a warranty claim, please provide the original receipt, on-line
registration, or other acceptable documentation. This limited warranty does not cover any
damage due to accident, misuse, abuse or negligence. Please contact Mobile Edge Customer
Service at info@mobileedge.com or 714-399-1400 for warranty service.
Loading...