Mobile Devices Ingenierie C4MAX E User Manual
Mobile Devices Ingénierie
C4MAX
User Manual
Version 1.1
15/12/2017
INSTALLATION GUIDE 2
Table of contents
Preface ................................................................................................................................................ 3
Warnings and notices........................................................................................................................ 3
1. Hardware features ..................................................................................................................... 4
2. Hardware description ................................................................................................................ 5
2.2. Recommendation for both type:...................................................................................... 6
3. Preparing/installing the device .............................................................................................. 10
3.1. Connect the GPS external antenna ............................................................................... 10
3.2. Choose the appropriate location for mounting ........................................................... 10
3.3. Insert the device on external support ............................................................................ 11
4. Inputs activation threshold ...................................................................................................... 14
5. Ouputs information................................................................................................................... 14
6. LEDs sequences ........................................................................................................................ 15
7. Support ....................................................................................................................................... 15
8. FCC Regulations: ...................................................................................................................... 15
9. RF Exposure Information .......................................................................................................... 16
INSTALLATION GUIDE 3
Preface
The information contained in this installation guide is subject to changes in order to
improve the reliability, design or features without prior notice. Mobile Devices
Ingénierie reserves the right to make changes in the content without obligation to
notify any person or organization of such changes or improvements. Mobile Devices
Ingénierie can in no event be held liable for technical or editorial errors or omissions
herein, nor for incidental, special or consequential damages from the furnishing,
performance or use of this installation guide.
Please contact our technical support for current updates and supplemental
information concerning the use and operation of this or other Mobile Devices
Ingénierie products.
Warnings and notices
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
Please read the installation guidelines, as well as the safety and operating instructions
before operating your device. Follow all instructions and heed all warnings in the
installation guide.
There is a risk of explosion if the battery is replaced by a wrong battery type. Please
discard empty battery according to local regulations.
INSTALLATION GUIDE 4
C4MAX
Performance
Processor
ARM 11 - 500MHz
RAM
64 Mbytes
NAND Flash
256 Mbytes
Power supply
External power supply 832V
External voltage
measurement
8-32V
Li-ion battery charger
Li-ion battery
900mA.h
Positioning
GPS receiver
Sirf Atlas V (A-GPS on option)
GPS antenna
External
Inertial sensors
Internal 3-axis
accelerometer
±2g, ±4g, ±8g
Internal 3-axis gyroscope
(on option)
±250°/s, ±500°/s, ±1000°/s, ±2000°/s
Interface & Telematics
features
(Mini) USB 2.0
Host / Device / UART powered
(5V out, 500mA max.)
Digitals Input / Analog
input
3 (Ignition, alarm and 1 input active
low) / 2
Digital Outputs
2 (relay-control & immobilizer on
option)
1-wire (for driver ID or
temp sensor)
Yes
LEDs
2 (1 controlled by software)
RTC
Yes
CAN 2.0B interface
If used, RS485 half duplex only, RS422
not possible
Product specific feature
RS232
2 (1 with RTS/CTS, 1 without)
RS485 / RS422
Full/half duplex RS485 or RS422
Bluetooth
Bluetooth 4.0 BLE dual-mode (with
internal antenna)
Wifi
IEEE Std 802.11n (with internal
antenna)
Other features
J1708 (optional) : if used, RS485 and
RS422 are not available.
1708 is compatible with CAN option.
Environmental
Connectors
microFIT 20 pins
Mini-USB
2 Fakra connectors for the external
antennas
Operating temperature *
-30/+70°C
Dimensions
96x54x17mm
GPS external antenna
3 meters cable With 27mm Fakra
connectors
1. Hardware features
Loading...