Mobile Devices Ingenierie C4DONGLE3G User Manual

C4DONGLE-3GNA-WBT

INSTALLATION GUIDE

V 1.0

07/08/2015

Table of contents

Preface..................................................................................................................................... 3

Warnings and notices .......................................................................................................... 3

1. Hardware features ........................................................................................................... 4

2. Hardware description...................................................................................................... 5

2.1. External view............................................................................................................... 5

2.2. Internal view................................................................................................................ 5

2.3 OBD connector pin out ............................................................................................ 5

2.4 OBD adapter wires....................................................

3. Preparing/installing the device .................................................................................... 7

3.1. Open the device to insert a SIM card................................................................. 7

3.2. Properly close the device ....................................................................................... 8

3.3. Install the OBD Dongle........................................................................................... 10

4. LED sequences ................................................................................................................ 10

5. Support .............................................................................................................................. 10

6. FCC Regulations: ............................................................................................................ 10

7. RF Exposure Information................................................................................................ 11

8. IC Notice ........................................................................................................................... 12

9. IC Radiation Exposure Statement.............................................................................. 12

................................................. 6

Preface

The information contained in this installation guide is subject to changes in order to improve
the reliability, design or features without prior notice. Mobile Devices Ingénierie reserves the
right to make changes in the content without obligation to notify any person or organisation
of such changes or improvements. Mobile Devices Ingénierie can in no event be held liable
for technical or editorial errors or omissions herein, nor for incidental, special or consequential
damages from the furnishing, performance or use of this installation guide.

Please contact our technical support for current updates and supplemental information
concerning the use and operation of this or other Mobile Devices Ingénierie products.

Warnings and notices

The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.

Please read the installation guidelines, as well as the safety and operating instructions before
operating your device. Follow all instructions and heed all warnings in the installation guide.

There is a risk of explosion if the battery is replaced by a wrong battery type. Please discard
empty battery according to local regulations.

1. Hardware features

OBD Dongle
Performance Processor ARM 11 - 500MHz
RAM 128 Mbytes
NAND Flash 256 Mbytes
Power supply External power supply 8-

External voltage

Li-pol battery 450mA.h
Communication Modem 3G US Data module (UE910)

GSM antenna Internal
Positioning GPS receiver
GPS antenna Internal
Interface & Telematics

features
3D Accelerometer ±2g, ±4g, ±8g
3 axis Gyroscope Please contact us
LED 1 (controlled by software)
Product specific feature Bluetooth Bluetooth 4.0 BLE dual-mode (with

Wifi IEEE Std 802.11n (with internal

Environmental Connectors OBD connector
Micro USB
Operating temperature * -25/+60°C
Dimensions With OBD connector: 27x60,5x49,5

SIM card Slot
OBD messaging protocols could be provided as an option (not included in standard

catalogue)
* Please read warnings section at the beginning of the installation guide

●

32V

●

measurement

• GSM 850, PCS 1900

• 3G WCDMA FDD B2, B5

Sirf Atlas V (A-GPS on option)

(Micro) USB (2.0 Host) powered (limited to 500 mA on 5V)

optional

internal antenna)

antenna)

mm
Without OBD connector: 27x48x49,5
mm"