Page 1
Read Me First
MobileDemand
xTablet T1600
Rugged xTablet T1600 User’s Guide
xTablet T1600 User Guide 1
Page 2
MobileDemand,
LC
1501 Boyson S quare Drive
Suite 1 01
Hiawath a, IA 52233
U.S.A.
Phone: 877-784-4338
Fax: 319-363-4122
Web: www.RuggedTabletPC.com
No parts of this work may be reproduced in any form or by any means - graphic, electronic, or mechanical, including
photocopying, recording, taping, or information storage and retrieval systems - without the written permission of the
publisher.
While every precaution has been taken in the preparation of this document, the publisher and the author assume no
responsibility for errors or omissions or for damages resulting from the use of information contained in this document or
from the use of program s and source code that m ay accompany it. In no event s hall the publisher and the author be li able
for any loss of profit or any other commercial damage caused or alleged to have been caused directly or indirectly by this
document.
© 2009 - 2014 MobileDemand
Products that are referred to in this document may be either trademarks and/or registered trademarks of the respective
owners. The publisher and the author make no claim to these trademarks.
LC
Read Me First
MobileDemand is a registered trademark of MobileDemand, LC.
MobileDemand logos are registered trademarks of MobileDemand, LC.
Windows is a trademark of the Microsoft group of companies.
The Bluetooth word m ark and logo are registered trademarks and are owned by the Bluetooth SIG, Inc.
2 xTablet T1600 User Guide
Page 3
Table of Contents
B
EFORE YOU START
P
ACKAGE CONTENTS
P
RODUCT OVERVIEW
Front View ............................................................................................................ 6
Back View ............................................................................................................. 7
Right View ............................................................................................................ 8
Left View .............................................................................................................. 8
Bottom View ......................................................................................................... 9
S
TATUS INDICATORS
GETTING
I
NSTALLING THE BATTERY
Charging the Battery.............................................................................................10
When to replace the Battery Pack .......................................................................... 11
Read Me First
Removing the Battery .......................................................................................... 11
C
ONNECTING THE POWER
Connecting the AC Adapter ................................................................................... 12
Using Battery Power............................................................................................. 12
S
TARTING YOUR xTablet T1600
Turning On Your Device........................................................................................ 13
Turning Off Your Device........................................................................................ 13
STARTED .................................................................
OPERATING
U
SING THE QUICK MENU
Quick Menu Overview.......................................................................................... 14
Configuring the SETUP Menu Settings .................................................................. 17
Configuring Programmable Buttons.. .................................................................... 18
Configuring External WWAN Antenna Switching ………............................................. 19
Configuring the Light Sensor Settings................................................................... 20
Configuring the External GPS Antenna Switching ………............................................ 21
Useful Information
Boot Menu…………….............................................................................................. 22
How to Enter the BIOS........................................................................................ 22
CTRL-ALT-DEL for Windows 7 Login to a Domain...………………………………………………………22
I don’t want a password upon wake...................................................................... 23
High Resolution Screen Scaling and Setting........................................................... 24
Changing Screen Resolution................................................................................ 26
U
SING THE CAMERA
Camera Application............................................................................................. 28
MAKING
I
NSTALLING THE MEMORY CARD
I
NSTALLING THE
C
ONNECTING THE
CONNECTIONS ........................................................
......................................................................................
.....................................................................................
....................................................................................
.....................................................................................
..............................................................................
.............................................................................
........................................................................
YOUR
xTablet T1600
..................................................
.............................................................................
.................................................................................
....................................................................................
......................................................................
SIM C
MICROPHONE/HEADSET
ARD
..........................................................................
.................................................................
5
5
6
9
10
10
12
13
14
14
22
28
32
32
33
33
xTablet T1600 User Guide 3
Page 4
C
ONNECTING
C
ONNECTING
C
ONNECTING TO WIRELESS CONNECTIONS
C
ONNECTING TO
USB
D
EVICES
to Bluetooth Peripheral
.........................................................................
.........................................................
........................................................
Wireless Wide Area Network..
............................................
How to use the Skylight Connection Manager application…………………………….38
Setting up the Barcode Scanner..
Setting up the Barcode Scanner
..............................................................
..........................................
Accessories……………………………
Accessories……..
....................................................................................
.......................................... 48
Troubleshooting….…………………
Accessories……..
.................................................................................... 49
..........................................
APPENDIX .............................................................................
C
OPYRIGHT
S
AFETY
Precaution on Battery Pack
General Product Safety…..
Handling and Maintenance
R
EGULATORY
S
AFETY INSTRUCTIONS
..............................................................................................
Information ................................................................................
......................................................................
.......................................................................
.......................................................................
General Guideline……………………………....................................................................... 54
Cleaning Guideline……………………………...................................................................... 54
Touchscreen Guideline……………………………................................................................ 55
Safety S
Federal Communications Commission Statement..................................................... 56
Canada, Industry Canada (IC) Notices.................................................................... 56
802.11 Radio Precaution Statement........................................................................ 56
RF exposure warning............................................................................................. 56
Canada, Industry Canada (IC) Notices..................................................................... 56
Battery Disposal ................................................................................................... 57
Caution for Adaptor............................................................................................... 58
Battery Safety ...................................................................................................... 58
Caution for RJ-45.................................................................................................. 58
TATEMENTS
...................................................................
................................................................................58
34
35
37
38
45
45
48
49
Read Me First
51
51
51
52
53
54
56
Before You Start
4 xTablet T1600 User Guide
Page 5
Before You Start
Congratulations on your purchase of this xTablet T1600.
This rugged xTablet T1600 is portable and provides users with maximum
mobile computing experience in a wide range of working environments.
Before you begin using your xTablet T1600, read this chapter to familiarize
yourself with the main components installed in the system.
Package Contents
If any of following items is damaged, please contact MobileDemand.
Read Me First
Tablet
Stylus Pen Briefcase Handle X-strap
AC adapter Power cord
xTablet T1600 User Guide 5
Page 6
Product Overview
Front View
Before You Start
Read Me First
No. Item Description
1
Program button Tap to enter the chosen program. (user defined)
2
Front camera Use for video conference.
3
Ambient light sensor Use to detect the current level of visible light in the
surrounding environment.
4
Microphone Capture audio.
5
Scanner or Camera
button
6
Home key Tap to return to the Start screen (Windows 8 only).
The button functionality can be assigned via Quick
Menu.
•
Scanner button: Press to trigger the Barcode
scan function if the barcode scanner is enabled.
•
Camera button: Press to take a picture.
6 xTablet T1600 User Guide
Page 7
Before You Start
Back View
Read Me First
No. Item Description
1
Barcode scanner Scan barcodes.
2
Camera LED flash Provides additional lighting when taking pictures
in low light.
3
Rear camera 5MP pictures with auto-focus.
4
Battery compartment Single battery pack.
5
Battery latch release
button
6
Speaker Audio output.
Press and hold the button to unlock and slide to
unlatch the battery latch and remove battery.
xTablet T1600 User Guide 7
Page 8
Right View
Before You Start
No. Item Description
1
Audio Combo jack Connect a headphone/external speakers/
microphone.
2
USB 3.0 ports (x2) Connect USB peripherals.
3
Memory card slot Use to insert memory cards to transfer pictures,
music, and data between your xTablet T1600 and
other SD compatible devices. The card reader
supports SD (Secure Digital), SDXC, SDHC, MiniSD (with adapter), Micro-SD (with adapter).
Read Me First
4
Mini SIM card slot Use to insert a Mini SIM card for LTE activation if
ordered with LTE.
Left View
No. Item Description
1
Power button Press to turn your xTablet T1600 on or off.
2
Volume buttons Press to adjust the volume level.
3
Kensington lock slot Connect a Kensington-compatible xTablet T1600
security lock.
8 xTablet T1600 User Guide
Page 9
Before You Start
Bottom View
No. Item Description
1
Docking contacts Connect the xTablet T1600 to a docking station.
2
DC-in jack Connect the power adapter.
Read Me First
Status Indicators
The status indicators in the upper side of the xTablet T1600 light up when a
particular function of the xTablet T1600 is active.
Icon Item Description
Power The power icon is solid green when the system is
RF
running. When the system is in sleep mode, the icon
blinks.
Blue antenna icon shows that radio (WLAN, WWAN,
or Bluetooth) communications are enabled.
Battery Battery icon:
•
Green: when battery is fully charged (95% or above)
•
Orange: when battery is charging
•
Flashing orange: charging error
•
Red: when battery capacity is lower than 10%
•
Off: when discharging and above 10% or off
xTablet T1600 User Guide 9
Page 10
Getting Started
Getting Started
Installing the Battery
1. Align and insert the battery to the
battery compartment.
2. Push completely until the battery is
fully seated.
3. Slide the battery latch to the lock
position to secure the battery.
Read Me First
Charging the Battery
The Lithium-ion battery is not fully-charged when shipped.
To charge the battery, follow the steps below:
1. Install the battery to your xTablet T1600. See procedures above.
2. Connect the AC adapter to the DC-in jack of your xTablet T1600.
3. Connect the AC adapter to the power cord.
4. Plug the power cord to an electrical outlet.
10 xTablet T1600 User Guide
Page 11
Getting Started
When to replace the Battery Pack
The battery performance gradually decreases over time and usage. We recommend
you to replace your battery pack after 18 to 24 months of usage.
Removing the Battery
To remove the battery, follow the steps below:
1. Connect to power or shut down the
tablet prior to battery removal.
2. Press and hold the battery latch release
Read Me First
button to slide the battery latch to the
unlock position.
2. Remove the battery out of the battery
compartment.
xTablet T1600 User Guide 11
Page 12
Getting Started
Connecting the Power
Your xTablet T1600 can be powered up using the AC adapter or the Lithium-ion
battery.
Connecting the AC Adapter
The AC adapter powers up your xTablet T1600 and charges the battery.
Read Me First
1. Connect the AC adapter to the DC-in jack of your xTablet T1600.
2. Connect the AC adapter to the power cord.
3. Plug the power cord to an electrical outlet.
Using Battery Power
1. Install a charged battery in the battery compartment.
2. Remove the AC adapter (if plugged). Your xTablet T1600 will automatically use
the battery power.
NOTE
•
If your xTablet T1600 is connected to an electrical outlet and the battery is
installed, your xTablet T1600 uses power from the electrical outlet while
charging the battery.
12 xTablet T1600 User Guide
Page 13
Getting Started
Starting Your xTablet T1600
Turning On Your Device
Press the button until the power icon lights up.
Turning Off Your Device
It is important to properly shut down your xTablet T1600 to avoid the loss of
unsaved data. To shut down your xTablet T1600, do the following:
Read Me First
On Windows 8
1. On the Start screen, swipe in from the
right edge of the screen, then tap
Settings.
2. Tap Power > Shut down.
On Windows 7
Click Start ( ) > Shut down.
Wait for your xTablet T1600 to turn off power
completely before removing the power source (if
necessary).
xTablet T1600 User Guide 13
Page 14
Operating Your xTablet T1600
Operating Your xTablet T1600
This chapter will guide you on how to use your xTablet T1600.
Using the Quick Menu
To enter the Quick menu:
•
On Windows 8: In Apps view, tap Quick Menu ( ). You can also access the
Quick menu on the task bar.
•
On Windows 7: Tap the arrow on the task bar to display
hidden icons. Then tap the Quick Menu icon ( ).
Read Me First
Quick Menu Overview
Windows 8 Windows 7
Icon Item Description
Airplane
mode
Tap the icon to enable/disable airplane mode.
NOTE
•
When the Airplane mode is enabled, the wireless
network (WLAN and WWAN), Bluetooth, and GPS will
be automatically disabled.
14 xTablet T1600 User Guide
Page 15
Operating Your xTablet T1600
Icon Item Description
WLAN
WWAN/GPS
WWAN
Tap the icon to enable/disable the Wi-Fi (WLAN) function.
Tap the icon to enable/disable the WWAN/GPS function.
(Windows 7 only)
Tap the icon to enable/disable the WWAN function.
(Windows 8 only)
Bluetooth Tap the icon to enable/disable the Bluetooth function.
GPS
Read Me First
Auto-rotate
Tap the icon to enable/disable the GPS function.
(Windows 8 only)
Tap the icon to enable/disable the Auto-Rotate screen
function.
Setup Tap the respective tab to set P key, Barcode/Camera key,
light sensor, external GPS antenna, and external WWAN
antenna settings. For details, refer to “Configuring the
SETUP Menu Settings”.
Information Tap the icon to view the battery charge cycle, Bios
xTablet T1600 User Guide 15
version, EC version, and Quick Menu version.
Page 16
Operating Your xTablet T1600
Icon Item Description
Keyboard
Mobility
center
Tap the icon to display/hide the on-screen keyboard
(OSK.exe). (Windows 7 only)
Tap the icon to adjust brightness, screen orientation,
volume, external display, battery status, sync, wireless
network, and presentation settings.
Barcode
NOTE
Tap the icon to enable/disable the Barcode function.
•
If the icon is gray (i.e. ), this indicates the current function is disabled.
Read Me First
16 xTablet T1600 User Guide
Page 17
Operating Your xTablet T1600
Configuring the SETUP Menu Settings
b
a
Read Me First
a. Programmable Button
b. External GPS Antenna
c. Light Sensor
d. External WWAN Antenna
c
d
xTablet T1600 User Guide 17
Page 18
Operating Your xTablet T1600
Configuring Programmable Buttons
Read Me First
•
If the device is not installed with a barcode scanner, the Function button can
be set as the shutter button when using the Camera.
•
To assign an application to the Program button, do the following:
I. Tap the folder icon ( ) to set up an application for the Program button.
II. Select the desired application and tap Open.
18 xTablet T1600 User Guide
Page 19
Operating Your xTablet T1600
Configuring External WWAN Antenna Switching
Tap the External WWAN Antenna tab to enable/disable the device to
automatically switch to the external WWAN antenna when it is affixed on a
docking station.
Read Me First
•
Dock with external WWAN antenna: The device will be automatically
switched to the external WWAN antenna when docking.
•
Dock without external WWAN antenna: The device will NOT be
automatically switched to the external WWAN antenna when docking.
xTablet T1600 User Guide 19
Page 20
Operating Your xTablet T1600
Configuring Light Sensor Settings
Tap the Light Sensor tab to enable/disable the automatic light sensor, set and
adjust the brightness level.
Current
ambient
brightness reading
Current preset
brightness level
Tap to restore the
default settings.
Set the range of illumination settings.
To change settings:
•
Customize the illumination range according to the ambient lighting, enter the
desired value in the first and second data box.
Read Me First
As an example in the above illustration:
- Outdoor (5000 ~ 500 lux)
- Indoor (500 ~ 50 lux)
- Low Light (50 ~ 0 lux).
•
Adjust the brightness level according to the ambient light, tap or to
adjust the setting (0~10).
•
Save all settings, tap Apply.
•
Enable the automatic light sensor function, tap the Enable Auto Light
Sensor checkbox. The system will automatically adjust the LCD brightness
according to these settings.
20 xTablet T1600 User Guide
Page 21
Operating Your xTablet T1600
Configuring External GPS Antenna Switching
Read Me First
•
Tap on Dock with external GPS antenna: The device will be automatically
switched to the external GPS antenna when docking.
•
Tap on Dock without external GPS antenna: The device will NOT be
automatically switched to the external GPS antenna when docking.
xTablet T1600 User Guide 21
Page 22
Operating Your xTablet T1600
Useful information
Boot Menu
To boot from a USB stick for example, you have two options.
1. Pressing F12 using a regular keyboard.
2. Go into the BIOS, and change the boot order, and make the USB stick the first boot
device.
How to Enter the BIOS
To enter the BIOS, follow these steps:
1. Connect a Keyboard to the tablet
2. Turn on the tablet
3. Start pressing the DELETE key repeatedly right away
4. The tablet will come up into the BIOS menu
Read Me First
How to CTRL-ALT-DEL for Windows 7 Login
We are working on this with our engineering team to resolve this. Until then, you will have to
use a wired, wireless, or Bluetooth keyboard.
1. Press the Windows Logo Button & the Power Button on the left side of the tablet at
the same time.
22 xTablet T1600 User Guide
Page 23
Tech Tip: I don’t want Windows to ask for my password
when I wake my tablet from sleep
We have noticed that even when we set the password to not prompt when the system awakes
from sleep, it still asks for a password. This causes users extra time to put in a password.
In Desktop Mode press and hold your finger on the Windows Start Logo in the bottom left
corner of the tablet
Read Me First
Select the Control Panel
Once in Control Panel, select User Accounts
Select Reset Security Policies
xTablet T1600 User Guide 23
Now your settings will take affect
that you have set in Power
Management for the Password not
being required on wake from sleep.
Page 24
High Resolution Screen Scaling and Setting
The xTablet T1600’s 1366 x 768 high resolution display is perfect for viewing image, video, or
other applications, however, Windows user interface (icons, buttons, and other user interface
elements) may be too small to read and operate at the default Windows settings. By changing
the display scaling or the display resolution setting of the device, you can adjust the size of the
text and other items on the desktop for optimal viewing. Display scaling is the recommended
method because it has the effect of adjusting user interface without having to move away from
the optimal resolution setting at 1366 x 768. This section will explain how you can adjust the
built-in windows display scaling setting and resolution setting.
Note:
• Before proceeding to change the scaling option, make sure any opened document is
saved then close, and all running applications are closed before proceeding to change the
display scaling, because this procedure requires users to log out of their account to apply
display scaling change.
Read Me First
Changing display scaling setting
Perform the following to change display scaling setting:
1. Tap and hold anywhere on the desktop for 3 seconds and release to bring up the
context menu, and select “Screen resolution” option as shown below:
24 xTablet T1600 User Guide
Page 25
2. A “Screen Resolution” Window will show up. Select the “
larger or smaller
” option in the window, as shown below:
Make text and other items
Read Me First
3. A “
Display
” window will show up. Under “
the scaling option to “
“
Apply
” to save changes, as shown below:
Medium – 125%
Change the size of all items
” section, change
” or any other desired display scaling and hit
4. A prompt may show up to ask if you want to sign out to apply the scaling change. Hit
“
Sign out Now
” to apply changes, as shown below:
xTablet T1600 User Guide 25
Page 26
5. The user may now login again to Windows to see the changed display scaling already
being applied.
Changing screen resolution setting
Alternatively, instead of changing the display scaling setting, user may choose to change the
overall resolution setting to make screen elements bigger.
1. Tap and hold anywhere on the desktop for 3 seconds and release to bring up the
context menu, and select “
Screen resolution
” option as shown below:
Read Me First
26 xTablet T1600 User Guide
Page 27
2. Click on the dropdown option next to “
tapping on the scale:
Read Me First
Resolution
” and select the desire resolution by
3. Hit “
4. If the new resolution is the desired display setting hit “
5. The user may now use the device with the new resolution setting.
Apply
applied resolution is usable.
next step. If the new resolution is not desirable, hit “
resolution to change to, and start again from step 2.
”. A prompt “
Display Settings
” prompt will show up to ask the user if the
Keep changes
Revert
” and select a different
” and continue to
xTablet T1600 User Guide 27
Page 28
Using the Camera
Camera Application
The xTablet T1600 supports a separate Camera application that enables users to
take photos.
There are two ways to launch the application:
•
Double-click on the desktop.
•
Tap Start > All Programs > Camera Application.
searching
Take Photos
Press the Record button to capture the pictures.
View Photos
•
Press the Forward or Backward button “ / ” to view the recorded photos.
•
Press the Play button “ ” to switch to Playback mode.
•
In Playback mode, press the Preview button “ ” to switch back to Camera
Read Me First
mode.
28 xTablet T1600 User Guide
Page 29
Operating Your xTablet T1600
Delete Photos
1. Press the Play button “ ” to switch to Playback Mode.
2. Use the Forward or Backward button “ / ” to select the photo that you
want to delete.
3. Press the Delete button “ ” and then choose Yes to delete the current
photo.
Record GPS Coordinates (Geotagging)
is the GPS signal status located on the top right corner of the
Read Me First
window.
If GPS coordinates
are not able to be received, the last coordinates
would be used instead.
GPS status indicator
GPS device is working properly
GPS device is not available
Searching for GPS signals
To use an external USB GPS device:
1. Press the Setup button “ ” to enter the Setup menu.
2. Tap > Auto Scan Comport.
The detected Port Number is displayed on the screen.
xTablet T1600 User Guide 29
Page 30
Operating Your xTablet T1600
How to Change the Camera Setup:
Press the Setup button “ ”.
Read Me First
Camera Selection:
There are three cameras that you can select: .
•
“ ” – the camera is available and ready to use.
•
“ ” - the camera is not available.
Press the “ ” button after you have chosen the desired camera.
Resolution:
There are four resolution options that you can select: . If
the Camera does not support these four resolutions, a “Change Resolution Error”
message will appear on the screen. Press the “ ” button to exit. (Native:
maximum resolution)
30 xTablet T1600 User Guide
Page 31
Operating Your xTablet T1600
Preview Size:
There are two preview size options that you can select: .
Press the “ ” button after you have chosen the desired preview size.
Geotagging:
Tap ON to enable the Geotagging.
Press the “ ” button to exit.
NOTE
•
Geotagging will only be activated if the xTablet T1600 is equipped with the GPS
module.
Read Me First
•
The camera logs the GPS position accurately if photos are taken outdoors.
Flash:
When capturing photos under the low light, tap ON to turn on the
LED Flash.
NOTE
•
The effective flash range is 50cm.
Idle Timing:
There are five
.
Idle Ti
ming
options
that you can select:
Press the “ ” button
after you have chosen the desired time.
NOTE
•
When the system is left idle for a certain period of time, the camera module(s)
would then stop running. It would be up and running again once user wakes up
the Camera application.
xTablet T1600 User Guide 31
Page 32
Making Connections
Making Connections
This chapter will guide you on installing peripheral devices to maximize the use
of your xTablet T1600.
Installing the Memory Card
Your xTablet T1600 supports different types of memory cards to provide faster
data transfer.
Supported types: SDHC, SDXC
To insert a memory card:
1. Push down and pull to open the I/O port cover.
2. Push the memory card into the memory card slot until it clicks into place.
Read Me First
32 xTablet T1600 User Guide
Page 33
Making Connections
Installing the SIM Card
You can use a SIM card for LTE radio activation if you have purchased the LTE
option.
NOTE
•
Check the availability of service and plan rates of data connection with your
network service provider.
To insert a SIM card:
1. Push down and pull to open the I/O port cover.
2. Push a valid SIM card into the SIM card slot until it clicks into place.
Read Me First
Connecting the Microphone/Headset
Your xTablet T1600 is equipped with audio combo jack that enables you to use
the headset or microphone.
C onnect a headset by opening the I/O port cover and plug the stereo
headphone cable into the audio combo jack.
C onnect to a microphone by opening the I/O door and plug the
microphone cable into the audio combo jack.
NOTE
•
The headset and microphone are not included.
xTablet T1600 User Guide 33
Page 34
Making Connections
Connecting USB Devices
You can connect your xTablet T1600 to other USB devices, such as a
mouse, keyboard, digital camera, printer, or an external hard disk drive.
1. Push down and pull to open the I/O door.
2. Connect one end of the USB cable to the USB port of your device.
3. Connect the other end of the cable to the USB device (if necessary).
NOTE
•
The USB cables are not included.
Read Me First
34 xTablet T1600 User Guide
Page 35
Making Connections
Connecting to Bluetooth Peripherals
Your xTablet T1600 can connect and communicate with other Bluetooth-enabled
devices.
Connecting to a Bluetooth Device
To add a device, follow the steps below:
1. Open the Quick menu.
2. Tap the Bluetooth icon ( ) to turn on the
Bluetooth function.
Read Me First
3. Tap the arrow on the task bar to display hidden
icons.
4. Tap the Bluetooth icon ( ).
5. Tap Add a Device. The system starts scanning for
Bluetooth devices and displays the available devices.
NOTE
•
If the device that you want to add does not appear on the screen, please
check to see if the device is turned on and discoverable.
xTablet T1600 User Guide 35
Page 36
Making Connections
6. Tap on a device, then tap Next to continue.
7. Tap Close to complete the pairing.
Read Me First
NOTE
•
The PIN you enter for pairing on the xTablet T1600 must be the same PIN
entered on the Bluetooth device.
•
Once a pairing has been created, connecting to that device again will no
longer require entering the PIN.
36 xTablet T1600 User Guide
Page 37
Making Connections
Connecting to a Wireless Local Area Network
Your xTablet T1600 comes with a WLAN (WiFi) module. A wireless network
can be added either when the network is detected or by manually entering
the settings information.
To connect, follow the steps below:
1. Open the Quick menu.
2. Tap the WLAN icon ( ) to turn on the wireless
network function.
Read Me First
3. Tap the wireless network icon ( ) on the
bar.
4. Available wireless network connections are
displayed. Tap the desired wireless network.
5. Tap Connect.
Some networks require a network security key or
a password.
task
TIP
Check Connect automatically box to
automatically connect to this network when it is
available.
6. Enter the network security key.
7. Tap OK.
8. After the connection is established, you can see the wireless icon ( ) in the
Notification area.
NOTE Actual wireless connectivity will depend on system configuration.
Please contact your network administrator for more information.
xTablet T1600 User Guide 37
Page 38
Making Connections
Connecting to a Wireless Wide Area Network (WWAN)
With WWAN (LTE), your xTablet T1600 can connect to the Internet using mobile
or cellular data networks.
To enable the function, follow the steps below:
1. Insert a valid SIM card into the SIM card slot.
2. Open the Quick menu.
3. Tap the WWAN icon ( ) to turn on the
WWAN function.
4. L a u n c h t h e S k y l i g h t C o n n e c t i o n
Manager application.
Read Me First
How to use the Skylight Connection Manager Application
Setting up Mobile Broadband with the Skylight application
with the MobileDemand xTablet T1600
Thank you for
module.
To use mobile broadband network connections with your MobileDemand xTablet T1600, you use the
Sierra Wireless Skylight application called Skylight.
The Skylight application is already installed on your computer; the icon is on your desktop.
You must set up the Skylight application before you can use your m
To do so, perform the follo
Step 1: Start the Skylight application
Step 2: Choose your Carrier in the Skylight application
Step 3 : Inserting your SIMM card
Step 4 : Connect to your carrier
Step 4: Set up xTablet GPS. You do not need a mobile broadband account to use the MobileDemand
xTablet's GPS feature.
purchasing
your MobileDemand xTablet T1600 with the mobile
wing steps:
38 xTablet T1600 User Guide
& GPS functionality
broadband
GOBI
obile broadband netwo
rk.
Page 39
Making Connections
Step One: Start the Skylight application
You start the Skylight application from the icon on the Desktop of Windows.
To start the Skylight application
1. Tap Start >
Read Me First
Desktop – Skylight
The Skylight application window opens and the icon appears in the Windows
notification area, for example:
Note: If you do not see the icon, click the arrow next to the notification area to view additional icons.
Step Two: Choose your carrier in the Skylight application
Before you can use the mobile broadband installed on your tablet, you need to set up the Skylight application with
the information about your mobile broadband network carrier.
1. In the Skylight application Window, click on the icon of the wrench.
xTablet T1600 User Guide 39
Page 40
Making Connections
2.
Click
on
“Network Operator, and you will be presented with a drop down list of carriers
.
Read Me First
3.
Select your carrier from the list of carriers
4.
You should choose Generic for T-Mobile in the USA
.
40 xTablet T1600 User Guide
Page 41
Making Connections
5.
For this example we will change from Sprint to Verizon Wireless network. Highlight Verizon Wireless and
hit OK.
Read Me First
6.
The
firmware
will
be
updated.
7.
This progress message will show down at the lower right hand corner of Windows.
8.
This will come up once the firmware on your LTE module has been updated to your carrier. This is letting
you know it is ok to connect. Make sure you read below about instructions on how to add your Standard
Size SIM from your carrier to the xTablet T1600.
xTablet T1600 User Guide 41
Page 42
Making Connections
9.
The next thing you must do is register your radio module information with a carrier and get a SIM card. Here are the
steps to follow for that.
10.
Turn off the tablet to install the Standard Size SIM card. Follow the instructions below on inserting the Standard Size
SIM card.
a. Verizon – You will need to purchase a Standard Size SIM from Verizon and associate the SIM
number to your business account. Then follow the steps below to insert the SIM into the system
b. Sprint – You will need to purchase a Standard Size SIM from Sprint and associate the SIM
number to your business account. Then follow the steps below to insert the SIM into the system
c. AT&T – You will need to purchase a Standard Size SIM from AT&T and associate the SIM
number to your business account. Then follow the steps below to insert the SIM into the system
d. T-Mobile - You will need to purchase a Standard Size SIM from T-Mobile and associate the SIM
number to your business account. Then follow the steps below to insert the SIM into the system
Step Four: Installing your LTE SIM
1. Make sure you have a standard size SIM
2. You will insert the SIM with the gold contact side facing up
Read Me First
3. Note location of notched corner on Micro SIM card should be facing up.
4. Open the I/O door on the right side of the tablet
5. The SIM sock is the socket shown in the picture.
42 xTablet T1600 User Guide
Page 43
Making Connections
6. Insert the SIM as shown.
Read Me First
7. The SIM will go in and snap into place.
8. Press on the SIM until you hear it snap into place.
9. To remove the SIM, press on it and it will unlock and pop out of the slot.
xTablet T1600 User Guide 43
Page 44
Making Connections
Step Three: Connecting to your carrier
1.
Now that your Standard Size SIM is installed and it is associated with your carrier, you can connect with your carrier
2.
Power on the xTablet T1600.
3.
Click “Connect” to connect to the carrier. If this is the first time you have connected, there will be an automatic
activation in the back ground.
.
Read Me First
4.
You are now connected to your carrier. To disconnect from your carrier, press Disconnect.
5.
Note about Carrier Activation: When switching from one carrier to another, the automatic activation may not come up
because the software is under the impression the GOBI module is already activated. Follow these steps if you want
to run the Automatic Activation Wizard manually with your carrier.
6. Click on the icon shown at the top and select Activation Wizard. If you have an account with Verizon,
and you have a 4G Standard Size SIM installed, it will activate.
44 xTablet T1600 User Guide
Page 45
Setting up the Barcode Scanner
Setting up the Barcode Scanner
This configuration should be completed prior to shipment. If for some reason scanning is not
functioning correctly please go through the following these steps.
Read Me First
1. Open up File Explorer and navigate to the T1600 Driver Folder and the MDScanner directory.
xTablet T1600 User Guide 45
Page 46
Setting up the Barcode Scanner
2. Right click on the file "MDScanDriver" and select Properties
Read Me First
3. Click on Change settings for all users.
4. Then click the Set the "Run this program as an administrator > Click OK > Do the same steps to the
MDScanWizard.exe file.
46 xTablet T1600 User Guide
Page 47
Setting up the Barcode Scanner
Read Me First
5. Open up the Quick Menu, and verify that the Barcode device is enabled.
6. Open up the Quick Menu and verify that the barcode Trigger is enabled.
7. The scanner should now be functional.
xTablet T1600 User Guide 47
Page 48
Auto
Adapter
Office Dock
Dual Pack Charger
Vehicle Dock
Large Stylus Kit
2-Point Shoulder Strap
Barcode Scanner
RFID Reader
Accessories
Accessories
The xTablet T1600 offers the following optional accessories for purchase:
High Capacity Battery
• Capacity: 7.4V 10600mAh (2S2P)
Li-Polymer Battery
• Rapidly charges your xTablet T1600 in
your car while you drive
• Length: 3m
• Two slot charger to charge any of the three
different battery packs.
• Two chargers can be daisy chained
together.
Utilizes the same power supply as the
one that is shipped with the tablet.
Hand Strap
Ergonomic hand-strap can help you hold
the xTablet T1600 much more easily and
comfortably.
• 4 USB
• Ethernet
• RS232
• HDMI
• Safe storage, charging and
communications while operating a
vehicle.
• 4 USB
• Ethernet
• RS232
• Built-in power converter up to 36VDC
• Other power converters up to 100VDC
• WWAN Antenna
• GPS Antenna
• Optional Keyboard Mounting Kit
• Larger and more rugged stylus for
intensive use.
• Rugged metal mesh tip
• 5.5” stylus
• 16” tether
Side stylus holder
• High performance 2D imager
• Reads linear, stacked linear and matrix
barcodes
• 2-Point shoulder strap provides another
option for carrying the tablet.
4-Point Shoulder Straps
• 4-Point shoulder strap provides another
option for carrying the tablet, but also for
“hands-free” operation.
• High performance HF RFID reader
• Supports ISO 15693, 14443A/B
standards, and NVC ISO 18092
Useful Information
48 xTablet T1600 User Guide
Page 49
•
•
The screen suddenly turns blank and
•
Wireless
LAN signal quality is poor
. •
•
Troubleshooting
Troubleshooting
Problem Solution
The removable battery is not charging.
Nothing appears on the screen.
the power indicator goes off.
Make sure the AC adapter is properly
connected, and that the removable battery
is properly inserted.
The xTablet T1600 may be in sleep mode
• Press the power button to wake up the
display.
• The brightness level may be too low.
Increase brightness. Verify by shading the
screen.
Make sure the AC adapter is properly
connected.
• If running on battery power, the battery
may be depleted, charge the battery.
The xTablet T1600 may be out of range.
Move the xTablet T1600 closer to the
access point or another wireless LAN
device associated with it.
• Check if your surroundings have
interferences, such as microwave ovens,
cordless phones. Move the xTablet T1600
away from objects causing interference.
I cannot connect to another wireless
LAN device.
Useful Information
Make sure that wireless LAN feature is
turned on.
• Make sure that the SSID setting is the
same for every wireless LAN device in the
network.
• Restart the xTablet T1600
• Make sure the IP address or subnet mask
setting is correct.
xTablet T1600 User Guide 49
Page 50
•
No sound is produced.
•
•
Barcode Scanner emits
light
but does
•
The GPS application cannot find my
location.
Barcode scanner does not emit light
and does not seem to work.
If just starting the tablet from power off, it
may take several minutes for signal to be
acquired.
• Make sure that GPS receiver and the
location sensor are enabled in Control
Panel.
• The xTablet T1600 may be out of
coverage area. Move your xTablet T1600
outdoors or closer to a window.
• Check if your surroundings have
interference, such as microwave ovens,
cordless phones. Move the xTablet T1600
away from objects causing interference.
Adjust volume of the xTablet T1600 by
adjusting the volume on the toolbar by
clicking on the speaker icon.
• If using an external audio device, make
sure that the cable is properly connected.
Make sure the Barcode scanner software
is running by checking for the MDScanner
utility down on the toolbar by the clock.
not read barcode presented to it.
Adjust the distance between barcode
scanner of the device and the barcode
being scanned.
• Make sure the barcode code type is
enabled in the tablet. To enable/disable a
specific barcode code type, use Intermec
EasySet program located in the driver’s
folder located off the root of the C:\ drive.
• Clean the scanner lens with a damp clean
cloth.
Useful Information
50 xTablet T1600 User Guide
Page 51
Appendix
Copyright
Copyright© 2014. All rights reserved.
transmitted, stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, without the prior written
permission of the manufacturer. Information is subject to change without prior
notice.
Safety Information
Follow and adhere to all warnings and instructions in this manual. For your safety, please
read all safety and operating instructions before using the product. Keep this manual for
future reference.
No part of this user manual may be
Useful Information
xTablet T1600 User Guide 51
Page 52
Page 53
Precaution on Battery Pack
Do Not Expose the Battery Pack to Excessive Heat, or Extreme Heat (Near a Fire, in Direct
Sunlight for example).
Generation of heat, ignition or rupture may result.
Do Not Disassemble, Modify, or Insert Sharp Objects Into the Battery Pack. Electrolyte
leakage, generation of heat, ignition or rupture may result.
Do Not Short the Positive (+) and Negative (-) Terminals of the Battery. Generation of heat,
ignition or rupture may result. When carrying or storing the device, do not place the battery
pack together with articles that may contact electricity.
Do Not Drop or Apply Strong Pressure to the Battery. Electrolyte leakage, generation of heat,
ignition or rupture of battery may occur.
Read Me First
Do Not Charge the Battery Other Than with the Products Specified In This Manual. If the
battery is not charged using one of the specified products and methods, electrolyte leakage,
generation of heat, ignition or rupture may result.
When the Battery Pack Has Deteriorated, Replace It with a New Battery. Continued use of a
damaged battery pack may result in heat generation, ignition or battery rupture.
Do Not Use the Battery Pack With Any Other Products. The battery pack is rechargeable and
is only designed for this specific product. If it is used with a product other than the specified
product, electrolyte leakage, generation of heat, ignition or rupture may result.
Do Not Use This Product With Battery Other Than the One Specified.
xTablet T1600 User Guide
52
Page 54
General Product Safety
This product should not be used near water such as bathtubs, sinks, swimming pools, wet
basement, etc.
Do not block any ventilation openings. Do not place the product against a wall or in an
enclosed space as doing so might impede the flow of cooling air.
Do not place the product near any heat sources such as radiators, warm air intakes, stoves
or other heat-generating devices (including amplifiers or other heat producing equipment).
Do not disregard the safety that a polarized or grounded connection can provide. A polarized
connection consists of two plugs, one of which is larger than the other. A grounded
connection has two blades and a third one that is grounded. If the main plug provided cannot
be inserted into your outlet, consult an electrician to replace your obsolete outlet.
Protect the power cord from being crushed or pinched, particularly in the area of the plugs,
any receptacles used, and the point of exit from the apparatus. Do not break off the ground
pin of the power cord.
Use only accessories specified by the manufacturer.
Use only with its transport carriage, stand, tripod, console or table specified by the
manufacturer or sold with the product. When using a carriage, move the carriage assembly
with the product carefully to avoid damage from falling over.
Unplug this apparatus during lightning storms.
Refer all servicing to qualified service personnel. A technical intervention is required when
the apparatus has been damaged in any way, for example if the power cord or plug is
damaged, liquid has been spilled or objects have fallen inside the unit, if the product has
been exposed to rain or moisture, if it does not operate normally or if it has been dropped
and cracked/broken.
Read Me First
53
xTablet T1600 User Guide
Page 55
General Guideline
Handling and Maintenance
Follow and adhere to all warnings and instructions in this manual. For you’re the longevity of the
product usage, please read all operating instructions before using the product. Keep this manual
for future reference.
Keep the product at least 13 cm (5 inches) away from electrical appliances that can generate
a strong magnetic field such as TV, refrigerator, motor, or a large audio speaker.
Do not place heavy objects on top of the xTablet T1600 as this may damage the display.
The screen surface can be scratched. Do not use paper towels to clean the display. It is best
to use a touch screen cleaning cloth. Avoid touching it with a pen or pencil.
Read Me First
To maximize the life of the backlight in the display, allow backlight to automatically turn off as
a result of power management. Avoid using a screen saver or other software that prevents the
power management from working.
Cleaning Guideline
Use a soft cloth moistened with water or a non-alkaline detergent to wipe the exterior of the
product.
Gently wipe the display with a soft, lint-free cloth. Do not use alcohol or detergent on the
product.
54
xTablet T1600 User Guide
Page 56
Touchscreen Guideline
Use your finger or the stylus on the display. Using sharp or metallic object may cause
scratches and damage the display, thereby causing errors.
Use a soft cloth to remove dirt on the display. The touchscreen surface has a special
protective coating that prevents dirt from sticking to it. Not using a soft cloth may cause
damage to the special protective coating on the touchscreen surface. To clean off hard to
remove dirt, blow some steam on the particular area and gently wipe away using a soft
cloth.
Do not use excessive force on the display. Avoid placing objects on top of the display as
this may cause the glass to break.
When there is a noticeable discrepancy in the operation of the touchscreen function (your
touch does not correlate to the proper location on the screen), recalibrate the touchscreen.
Read Me First
55
xTablet T1600 User Guide
Page 57
Page 58
Regulatory Safety
Statements
FCC Digital Emissions Compliance
Canadian Digital Apparatus Compliance
802.11 Radio Precaution Statement
RF Exposure Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the radio or television receiving antenna.
• Increase the separation between the computer equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the radio or television
receiver is connected.
• Consult the dealer or an experienced radio television technician for help.
This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Canada, avis d'Industry Canada (IC)
Cet appareil numérique de classe B est conforme aux normes canadiennes ICES003 et RSS-210.
Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil
ne doit pas causer d'interférence et (2) cet appareil doit accepter toute
interférence, notamment les interférences qui peuvent affecter son
fonctionnement.
Informations concernant l'exposition aux fréquences radio (RF)
La puissance de sortie émise par l’appareil de sans fil est inférieure à la limite d'exposition aux fréquences
radio d'Industry Canada (IC). Utilisez l’appareil de sans fil de façon à minimiser les contacts humains lors du
fonctionnement normal. Ce périphérique a été évalué et démontré conforme aux limites SAR (Specific
Absorption Rate – Taux d'absorption spécifique) d'IC lorsqu'il est installé dans des produits hôtes
particuliers qui fonctionnent dans des conditions d'exposition
à des appareils portables.
Read Me First
Caution: Users are responsible for configuring the channels of operation that comply with their country
regulatory standards. A Wireless Network Administrator should review the operating restrictions
detailed within the Access Point installation manual.
Caution: 802.11a wireless LAN 5.15 to 5.25 GHz (5 GHz radio channels 34 to 48) is restricted to indoor
operations to reduce harmful interference to co-channel Mobile Satellite System (MSS)
operations.
The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. Use of
antennas and accessories not authorized may void the compliance of this product and may result in RF
exposure beyond the limits established for this equipment.
This device has been evaluated for and shown compliant with the IC Specific Absorption Rate (“SAR”) limits
when installed in specific host products operated in portable exposure conditions.
Copyright
Copyright© 2014. All rights reserved.
No part of this user manual may be transmitted, stored in a retrieval system, or translated into any language
or computer language, in any form or by any means, without the prior written permission of the
manufacturer. Information is subject to change without prior notice.
xTablet T1600 User Guide
Page 59
THIS PRODUCT CONTAINS A LITHIUM-ION OR
Battery
Disposal
NICKEL-METAL HYDRIDE BATTERY. IT MUST BE
DISPOSED OF PROPERLY. CONTACT LOCAL
ENVIRONMENTAL AGENCIES FOR INFORMATION ON
RECYCLING AND DISPOSAL PLANS IN YOUR AREA.
ANNEX IV
Symbol for the marking of electrical and electronic equipment
The symbol indicating separate collection for electrical and electronic equipment
consists of the crossed-out wheeled bin, as shown below. The symbol must be
printed visibly, legibly and indelibly.
Read Me First
57
xTablet T1600 User Guide
Page 60
Appendix
CAUTION FOR ADAPTER
THE xTablet T1600 IS FOR USE WITH DEDICATED AC ADAPTER.
BATTERY SAFETY
DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.
REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE
MANUFACTURER. DISPOSE OF USED BATTERIES ACCORDING TO THE
MANUFACTURER'S INSTRUCTIONS.
CAUTION FOR RJ-45
The RJ-45 jack is not used for telephone line connection.
Safety Instructions
Appendix
These safety instructions should always be observed to ensure safe operation
when handling the device
•
Do not place this device on an unstable table or surface. The device may fall,
causing serious damage to its housing and components.
•
Do not cover the device, or block the air ventilation holes of the device with any
other objects.
•
Do not use any sharp object to tap on the display screen.
•
Do not expose the device to direct sunlight and dusty environments.
•
Keep the device away from excessive heat and humidity.
•
Keep liquids away from the device.
•
Keep the device away from any magnetic emitting devices as this may affect the
quality of the wireless signal reception.
•
When using an AC adapter:
Place this device in a location that is close enough to an electrical
outlet to accommodate the length of the power cord.
Operate this device only with the type of power source indicated on the
device marking label.
Disconnect the AC adapter from the electrical outlet if the device is not
being used for an extended period of time.
58
xTablet T1600 User Guide
Page 61
•
When cleaning the device,
Be sure to turn off the device properly and unplug the AC adapter
before cleaning.
Wipe the device with a clean, dry cloth.
•
Do not use abrasive cleaners to clean the device.
Do not attempt to disassemble or repair this device. Doing so will void the
warranty.
59
Loading...