Mobile Action Technology 18H69R1 User Manual
(
Bluetooth 4.0 Low Energy Wristband
Q-69HR
(
User Manual
Device Overview
Reversible Wristband Clasp
CoreTouch Button
Metallic contact for charging
Optical Sensor
EN
How to wear your Q-Band QR-69HR ?
Wear Q-Band Q69-HR on your wrist
1 2
Video Demo
Put on the wristband with the screen facing up
and the band wrapped around your wrist. Slide
one band through the loop of the other band, and
align the clasp along the band to find the holes
where best fit the clasps.
Video Demo:
http://ww2.voiis.com/igotu-life/wear/Q-Band-HR-Plus
Squeeze both clasps into the holes on the wristband
until you hear a click, indicating the band is securely
fastened.
Note: The wristbands are both replaceable and
reversible.
Fasten Q-Band Q-69HR with clasp
Detecting your Heart Rate
3
Please make sure the wristband is worn as tightly as
1.
possible on the wrist without any discomfort, in order
to enhance the accuracy of heart rate signals that
are detected.
Wear the wristband three fingers away from your
2.
wrist. When “-----“ text appears on the screen,
please stay still briefly for about 10 seconds to obtain
a heart rate reading.
Charge your Q-Band Q-69HR
4 5
2
1
Prior to charging Q-Band Q-69HR, make sure it is securely placed inside the
charging box with the lid closed, and the USB connector is plugged in to a
computer or a power source via a power adapter.
Important Notice:
The product is shipped with the screen and keys locked, and will be unlocked once it is
charged via USB connection. Please make sure the "Charging" icon appears while it is
being charged, indicating the device is connected correctly and getting charged.
Video Demo:
http://ww2.voiis.com/igotu-life/charge/Q-Band-HR
3
Charging icon
4
(1)Push
Change the wristband
1
(2)Up
2
Remove the wristbands by sliding out both bands from the slots on both sides
1.
of the core.
Insert the new bands into the slots on both sides of the core.
2.
Important Notice:
Failure to follow the instructions above might cause damage to the device.
Get Started with Q-Band Q-69HR
(
Q-69HR
(
User Manual
Download i-gotU Life App
1 2
Download i-gotU Life app from Google Play or App Store on your
smartphone:
https://play.google.com/store/apps/details?id=com.mobileaction.ilife
http://appstore.com/igotulife
Your Q-Band Q-69HR can be configured directly on the i-gotU Life app.
First time setup:
Charge the device to unlock the key and screen.
Open the i-gotU Life app.
A Setup Wizard will be launched automatically.
Follow the on-screen instructions to proceed with more settings.
Set up a new device from Settings:
Apk download: http://global.mobileaction.com/download/apk
Supported Device
•
Any Android smartphone (v4.3 and up) with built-in 4.0
Bluetooth connectivity; or
•
iPhone 4s and later models, iPad 2 and later models,
and iPod Touch (all with iOS version 7.0 and up).
•
A complete list of supported smartphone models or
mobile devices can be found at:
http://ww2.voiis.com/qband/devices.html
Start Using Q-Band Q-69HR
3 4
1. Switch between different function modes
Open the i-gotU Life app.
Tap the app icon at the upper left corner to open function menu.
Choose Settings.
Tap Setup New Device under MORE DEVICE SETTINGS.
Follow the on-screen instructions to continue.
Your personal information is used to calculate your Base Metabolic
Rate (BMR), which determines your calories burned.
Silent Alarm
1. Tap the button twice to wake up the device screen.
2. Long-press the button on the Q-Band Q-69HR until you see 4 icons
on the screen for mode selection.
3. Tap the button twice to switch mode.
4. You’ll be entering the selected mode in 3 seconds.
2. Change display information
Notification
Information shown on the screen will vary as you press the
button on the Q-Band Q-69HR to toggle between screens.
3. Q-Band Q-69HR modes
Daily mode: Analyzes your daily data, including steps taken
and calories burned.
Online Help
Sleep mode: Tracks your sleep pattern and quality.
Sports mode: Starts a workout and displays information
including duration, steps taken, calories burned, and distance
traveled during the workout.
Manual download
Frequently Asked Questions
Nap mode: Awakes you via vibration after a short nap.
Set up Q-Band Q-69HR
1.
2.
3.
4.
1.
2.
3.
4.
5.
Note
Features of Q-Band Q-69HR & i-gotU Life App
Silent alarm of Q-Band Q69-HR gives you a wake-up alert via soft vibrations.
While in the sleep mode, the alarm can be dismissed by long-pressing
the button on Q-Band Q-69HR. By pressing the button once, the alarm will
not be dismissed but alert you again in 5 minutes. Alarm settings can be
changed in: open i-gotU Life app > Menu > Silent Alarm.
You will be notified with incoming calls, SMS, E-Mail, or alerts from the
social apps via vibration. When notified about an incoming call on an
Android smartphone, you may reject the call by long-pressing the button
on Q-Band Q-69HR. Notification can be set up from: i-gotU Life App Menu
-> Notification.
Android: http://ww2.voiis.com/igotu-life/help.html?language=en
iOS: http://ww2.voiis.com/igotu-life/help.html?language=en&platform=ios
http://www.mobileaction.com/download/Q-Band_download.jsp
http://www.mobileaction.com/Q68HR-FAQ
Screen Description
5
1
Connecting
2
Disconnected
3
Alarm
4
Daily Mode
5
Date
6
Overall Progress
(the average of Calories + Steps)
7
Battery Status
8
Steps
9
Calories
10
Heart Rate
11
Aerobic (Zone 3 and above)
12
Duration
13
Distance
Important Notice
Please make sure your Q-Band Q-69HR is fully charged when used
1.
for the first time. It takes about 2 hours before it is fully charged.
Although the device is usable in the rain, its use under water is
2.
prohibited. Please avoid showering or sauna/steam bathing
because high temperature, steam and water jet may cause
damage to the device.
Please do not use any corrosive chemical to clean the device.
3.
The built-in Li-Polymer Battery might be damaged if it remains
4.
low voltage for a long time. It is suggested that you charge the
battery once every three months to prolong the battery's
lifetime, even though you don't use the device very often or do
not plan to use it for a while.
1 3 5 2 4
6
8
7
9
WEEE
Note on environmental protection:
After the implementation of the European Directive
2002/96/EU in the national legal system, the following
applies:
Electrical and electronic devices may not be disposed
of with domesticwaste. Consumers are obliged by law
to return electrical and electronic devices at the end
of their service lives to the public collecting points set
up for this purpose or point of sale. Details to this are
defined by the national law of the respective country.
This symbol on the product, the instruction manual or
the package indicates that a product is subject to
these regulations. By recycling, reusing the materials
or other forms of utilizing old devices, you are making
an important contribution to protecting our
environment.
10
11
Federal Communications Commission (FCC) Statement 15.21
You are cautioned that changes or modifications not expressly approved by the part responsible for
compliance could void the user’s authority to operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-C
onnect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device must accept any
interference received, includinginterference that may cause undesired operation of the device.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
End users must follow the specific operating instructions for satisfying RF exposure compliance. This
transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Operating temperature:-10° to 65°C (14° to 149°F)
Charging temperature:0° to 45°C (32° to 113°F)
Power input type:DC 5V USB cable
Battery type:Rechargeable Li-Poly, 3.7 Vdc
Input:Maximum DC 5V, 0.1A
12
13
Loading...