Mobile Action Technology 17H68R1 User Manual

Q-Band

User ManualQ-68HR

Device Overview

Reversible Wristband Clasp

Core Touch Button

Metallic contact for charging

Optical Sensor

EN

How to wear your Q-68HR?

Wear Q-68HR on your wrist

1 2

Put on the wristband with the screen facing up and the band wrapped
around your wrist. Slide one band through the loop of the other band, and
align the clasp along the band to find the holes where best fit the clasps.

Charge your Q-68HR

3 4

1

Fasten Q-68HR with clasp

Squeeze both clasps into the holes on the wristband until you hear a
click, indicating the band is securely fastened.

Note: The watch band is replaceable and both side wearable/reversible.

Change the wristband

1

2

3

To charge your Q-68HR, place it in the charging box at the
other end of the USB cable. Close the box afterwards, and
make sure the Q-68HR is securely covered. Plug the USB
connector to either a PC or power adapter to start charging.

2

Spread open both bands with the screen facing up, and press down the screen

1.
with your thumb until the core comes off the wristband.

Insert the core with screen facing up into the notch from below the wristband.

2.
Make sure the two tenons on each side of the core are securely fixed into the
corresponding slots in the bands.

Important Notice:
Failure to follow the instructions above might cause damage to the device.

Get started with Q-68HR

Q-Band

User ManualQ-68HR

Download and Install i-gotU Life app

1 2

Please download i-gotU Life app from Google Play or the App Store
and have it installed on your smartphone:

https://play.google.com/store/apps/details?id=com.mobileaction.ilife
http://appstore.com/igotulife

Apk download: http://global.mobileaction.com/download/apk

Supported device

•

Any Android smartphone (v4.3 and up) with built-in 4.0
Bluetooth connectivity; or

•

iPhone 4s and later models, iPad 2 and later models,
and iPod Touch (all with iOS version 7.0 and up).

•

A complete list of supported smartphone or mobile
devices can be found at:

http://ww2.voiis.com/qband/devices.html

Start Using Q-68HR

3 4

1. Switch between different function modes

1. Tap the button twice to wake up the device screen.

2. Long-press the button on the Q-68HR until you see 4 icons
on the screen for mode selection.

3. Tap the button twice to switch mode.

4. You’ll be entering the selected mode in 3 seconds.

2. Change display information

Information shown on the screen will vary as you press the
button on the Q-68HR to toggle between screens.

3. Q-68HR modes

Daily mode: Analyzes your daily data, including steps taken

and calories burned.

Sleep mode: Tracks your sleep pattern and quality.

Sports mode: Starts a workout and displays information

including duration, steps taken, calories burned, and distance
traveled during the workout.

Nap mode: Awakes you via vibration after a short nap.

4. Icon description

Date
Connection Status
Current Mode
Overall Progress (the average of Calories + Steps)
Battery Status
Heart Rate

Set up Q-68HR

Your Q-Band HR can be configured directly on the i-gotU Life app.

First time setup:

Open the i-gotU Life app.

1.

A Setup Wizard will be launched automatically.

2.

Follow the on-screen instructions to proceed with more settings.

3.

Set up a new device from Settings:

1.

Open the i-gotU Life app.

2.

Tap the app icon at the upper left corner to open function menu.

3.

Choose Settings.

4.

Tap Setup New Device under MORE DEVICE SETTINGS.

5.

Follow the on-screen instructions to continue.

Note

Your personal information is used to calculate your Base Metabolic
Rate (BMR), which determines your calories burned.

Features of Q-68HR & i-gotU Life App

Silent Alarm

Silent alarm of Q-68HR gives you a wake-up alert via soft vibrations.
While in the sleep mode, the alarm can be dismissed by long-pressing
the button on Q-68HR. By pressing the button once, the alarm will not
be dismissed but alert you again in 5 minutes. Alarm settings can be
changed in: open i-gotU Life app > Menu > Silent Alarm.

Notification

You will be notified with incoming calls, SMS, E-Mail, or alerts from the
social apps via vibration. When notified about an incoming call on an
Android smartphone, you may reject the call by long-pressing the
button on Q-68HR. Notification can be set up from: i-gotU Life App

Menu -> Notification.

Online Help

Android: http://ww2.voiis.com/igotu-life/help.html?language=en
iOS: http://ww2.voiis.com/igotu-life/help.html?language=en&platform=ios

Manual download

http://www.mobileaction.com/download/Q-Band_download.jsp

Important Notice

Please make sure your Q-68HR is fully charged when used for the first

1.
time. It takes about 2 hours before it is fully charged.

Please do not use under water.

2.

Please do not use any corrosive chemical to clean the device.

3.

The built-in Li-Polymer Battery might be damaged if it remains low

4.
voltage for a long time. It is suggested that you charge the battery once
every three months to prolong the battery's lifetime, even though you
don't use the device very often or do not plan to use it for a while.

WEEE

Note on environmental protection:

After the implementation of the European Directive 2002/96/EU in the
national legal system, the following applies:
Electrical and electronic devices may not be disposed of with domestic
Waste. Consumers are obliged by law to return electrical and electronic
devices at the end of their service lives to the public collecting points set up
for this purpose or point of sale. Details to this are defined by the national
law of the respective country. This symbol on the product, the instruction
manual or the package indicates that a product is subject to these
regulations. By recycling, reusing the materials or other forms of utilizing old
devices, you are making an important contribution to protecting our
environment.