Mobile Action Technology 16H62R1 User Manual

Q-62HR

Clasp

Wristband

Device

Overview

Q-Band

Button

Core

Metallic contact for charging

How to wear your

Q-62HR?

User Manual

EN

Wear Q-62HR on yo ur wris t

1

Fasten Q-62HR with clasp

2

Put on the wristband with the screen facing up and the band
wrapped around your wrist. Align the clasp along the band to
find the holes where best fit the clasps.

Squeeze both clasps into the holes on the wristband until you
hear a click, indicating the band is securely fastened.

Charge your Q-62HR

3

To charge your Q-62HR, place it in the charging box at the
other end of the USB cable. Close the box afterwards, and
make sure the Q-62HR is securely covered. Plug the USB
connector to either a PC or power adapter to start charging.

1. Spread open both bands with the screen facing up, and press down

2.

Change the wristband

4

1

2

the screen with your thumb until the core comes off the wristband.
Insert the core with screen facing up into the notch from below the

wristband. Button up the clasp on the side of the band with 2 holes.
Please note that the charging contact should be near the clasp.

Q-62 H R

Q-Band

User Manual

Get started with

Q-62HR

Download and Install i-gotU Life app

1

Please download i-gotU Life app from Google Play or the App Store
and have it installed on your smartphone:

https://play.google.com/store/apps/details?id=com.mobileaction.ilife
http://appstore.com/igotulife

Apk download: http://global.mobileaction.com/download/apk

Supported device

• Any Android smartphone (v4.3 and up) with built-in 4 . 0
Bluetooth connectivity; or

• iPhone 4s and later models, iPad 2 and later models,
and iPod T ouch (all with iOS version 7.0 and up).

• A complete list of supported smartphone or mobile
devices can be found at:

http://ww2.voiis.com/qband/devices.html

Set up Q-62HR

2

Your Q-62HR can be configured directly on the i-gotU Life app.

First time setup:

1. Open the i-gotU Life app.
A Setup Wizard will be launched automatically.

2.
Follow the on-screen instructions to proceed with more settings.

3.

Set up a new device from Settings:

1.

Open the i-gotU Life app.

2.

Tap the app icon at the upper left corner to open function menu.

3.

Choose Settings.

4.

Tap Setup New Device under MORE DEVICE SETTINGS .

5.

Follow the on-screen instructions to continue.

Note

Your personal information is used to calculate your Base Metabolic
Rate (BMR), which determines your calories burned.

Start Using Q-62HR

3

Features of Q-62HR & i-gotU Life App

4

1. Switch between different function modes

1. Long-press the button on the Q-62HR until you see 4 icons
on the screen for mode selection.

2. Press the button to switch mode.

3. You’ll be entering the selected mode in 3 seconds.

2. Change display information

Information shown on the screen will vary as you press the button on
the Q-62HR to toggle between screens.

3. Q-62HR modes

Daily mode: Analyzes your daily data, including steps taken

and calories burned, and displays current UV index.

Sleep mode: Tracks your sleep pattern and quality.
Sports mode: Starts a workout and displays information

including duration, steps taken, calories burned, UV-index and
distance traveled during the workout.

Nap mode: Awakes you via vibration after a short nap.

4. Icon description

Date

Alarm
Connection Status
Current Mode
Overall Progress (the average of Calories + Steps)
Battery Status

UV – Index

Important No tice

1. Please make sure your Q-62HR is fully charged when used

for the first time. It takes about 2 hours before it is fully
charged.

2. Please do no t use under water.

3. Please do not use any corrosive chemical to clean the device.

4. The built-in Li-Polymer Battery might be damaged if it remains low
voltage for a long time. It is suggested that you charge the battery
once every three months to prolong the battery's lifetime, even
though you don't use the device very often or do not plan to use it
for a while.

Silent Alarm

Silent Alarm awakes you using gentle vibrations of the Q-62HR.
You can dismiss the alarm by long-pressing the button on the
Q-62HR. In case you miss the alarm, Q-62HR will alert you
again in 5 minutes. Alarms can be set up from: i-gotU Life App

Menu -> Silent Alarm.

Notification

You will be notified with incoming calls, SMS, E-Mail, or alerts
from the social apps via vibration. When notified about an
incoming call on an Android smartphone, you may reject the call
by long-pressing the button on Q-62HR. Notification can be set
up from: i-gotU Life App M enu -> Not ific ati on .

Online Help

Android: http://ww2.voiis.com /igotu-lif e/h elp.html?langua ge=en
iOS: http://ww2.voiis.com/igotu-life/help .html?langua ge=en&pla tform=ios

WEEE

Note on environmental protection:

After the implementation of the European Directive 2002/96/EU in the
national legal system, the following applies:
Electrical and electronic devices may no t be di sposed of with dome stic
Consumers are obl iged by law to return electrical and electronic d ev ices at
the end of their service lives to the public collecting points set up for this
purpose or point of sale. Details to this are defined by the national law of the
respective country. This symbol on the product, the instruction manual or the
package indicates that a product is subject to these regulations. By recycling,
reusing the materials or other forms of utilizing old devices, you are making
an important contribution to protecting our environment.

W

aste.